New products
New products New products
zł119.00
Delivery date unknown
zł119.00
Delivery date unknown
Step-Down Buck Voltage Regulator 4-25V 600mA D24V6AHV
ID: 195582
5906623485550
zł37.77
Tax included
zł30.71 tax excl.
The Step-Down D24V6AHV Buck Voltage Regulator module with adjustable output voltage in the range of 4-25V with a wide input voltage range of 4.5-42V and a maximum output current of 600 mA. Pololu 2104
Description
The Step-Down D24V6AHV buck voltage regulator module with adjustable output voltage in the range of 4-25V and wide input voltage range of 4.5-42V. The maximum current load of the module is 600 mA. The converter achieves a standard efficiency of 80% at similar values of input and output voltage.
Note! The board does not have reverse-voltage protection. Incorrect power connection will cause permanent damage of the module.
The inverter module is also available in version with output range 2.5-7.5V
Features
- Input voltage: 4.5-42 V
- 4-25V adjustable output voltage with 4% accuracy
- Type. maximum current: 600 mA
- Built-in protection against short-circuit and overheating
- Type. efficiency: 80%
- Size: 15 × 10 × 4 mm
- Possibility of mounting goldpin
Connections
- VIN - power input (4.5-42V)
- GND - mass
- VOUT - output
- SHDN – Shutdown pin can be driven low (under 0.3 V) to turn off the output and put the board into a low-power state that typically draws 20 μA, and it can be driven high (above 2.3 V) to enable the board. If you do not need to use the shutdown feature, the SHDN pin can be directly connected to VIN to permanently enable the board. You should not leave this pin disconnected as this can result in unpredictable behavior.
Kit contains
- Buck converter module D24V6AHV x1
- Goldpin connector 4pin straight x1
- Goldpin connector 4pin right-angle x1
195582
Data sheet
- Output voltage
- 4 - 25 V
- Output current
- 0.6A
- Converter type
- Step-down
- Supply voltage min
- 4,5 V
- Supply voltages max
- 42 V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
Step-Down converter module with an input voltage of up to 5.5 V, an output voltage of 3.3 V and an output current of 1.2 A (2 A instantaneous current). Adafruit 4711
zł20.30
24h
Available quantity: 13
Available
An efficient step-down converter that reduces the input voltage to 3.3 V at a maximum current of 100 mA, offering high efficiency due to low quiescent current (<20 μA). It supports input voltages from 3.3 V to 65 V, has a Power Good (PGOOD) function, an EN input for system shutdown, and short circuit and overheat protection, making it a reliable and energy-efficient solution. Pololu 5372
zł22.60
24h
Available quantity: 2
Available
The compact (0.4″ × 0.5″) D24V5F2 synchronous buck voltage regulator takes input voltages between 3 V and 36 V and efficiently reduces them to 2.5 V while allowing for a maximum output current of 500 mA. This regulator offers typical efficiencies between 80% and 90%. The pins have a 0.1″ spacing, making this board compatible with standard solderless breadboards and perfboards.
zł35.08
4 weeks
No product available!
Waterproof DC-DC Step-Down Converter with 8 to 22V input voltage and 5V 3A USB output
zł19.85
4 weeks
No product available!
No product available!
Step Down DC-DC converter module based on LM2596 circuit, input voltage 3-40V, regulated output voltage 1.5--35V
zł3.65
24h
Available quantity: 825
Available
The Step Down DC-DC converter module (MP2307) allows to obtain 0.93..18V output voltage at 4.75..24V input voltage. The output voltage is regulated by a potentiometer
zł8.18
24h
Available quantity: 2
Available
An efficient step-down converter that reduces the input voltage to 3.3 V at a maximum current of 100 mA, offering high efficiency thanks to its low quiescent current (<20 μA). It supports input voltages from 3.3 V to 65 V, has short circuit and overheating protection, making it a reliable and energy-efficient solution. Pololu 5362
zł22.60
4 weeks
No product available!
The DC-DC Buck Converter DC5-36-TO-DC3V3-5 in SMD version is designed for direct surface mounting. With selectable output voltage and high efficiency, it is suitable for applications involving microcontrollers, IoT systems, and mobile electronic devices.
zł13.65
24h
Available quantity: 2
Available
Modular power supply with a power of 3 W, input voltage from 100 to 240 V and output voltage of 3.3 V. Designed for mounting on a PCB. Hi-Link HLK-PM03
zł14.77
4 weeks
No product available!
An efficient step-down converter that reduces the input voltage to 5 V at a maximum current of 100 mA, offering high efficiency due to low quiescent current (<20 μA). It supports input voltage from 5 V to 65 V, has a Power Good (PGOOD) function, an EN input for system shutdown, and short circuit and overheat protection, making it a reliable and energy-efficient solution. Pololu 5373
zł23.43
4 weeks
No product available!
The LM2596 module with an adjustable step-down converter is a versatile tool for powering and testing electronic circuits. It allows convenient voltage adjustment with precise parameter monitoring thanks to the built-in voltmeter. Ideal for prototyping, laboratory experiments, and service work.
zł8.63
4 weeks
No product available!
Step-Down converter D36V50F5 with an output voltage of 5 V, an input voltage from 5.5 to 50 V and a maximum output current of 8 A. Pololu 4091
zł151.14
24h
Available quantity: 2
Available
Power supply based on DC Step Down converter with adjustable output voltage from 0 to 16.5 V and current efficiency of 3 A. The set includes LCD display and transparent case
zł29.54
4 weeks
No product available!
Modular power supply with a power of 3 W, input voltage from 100 to 240 V and output voltage of 5 V. Designed for mounting on a PCB. Hi-Link HLK-PM01
zł14.90
24h
Available quantity: 21
Available
DFR0379
zł23.39
24h
Available quantity: 8
Available
The Step-Down D24V6AHV Buck Voltage Regulator module with adjustable output voltage in the range of 4-25V with a wide input voltage range of 4.5-42V and a maximum output current of 600 mA. Pololu 2104