DC-DC Step-Up/Step-Down converter module 3.3V 600mA
ID: 587679
5906623464654
zł6.77
Tax included
zł5.50 tax excl.
Step-Up/Step-Down converter with an output voltage of 3.3 V, an input voltage from 3 to 15 V and a maximum current of up to 600 mA
Description
Step-Up/Step-Down converter module with an output voltage of 3.3 V and an input voltage from 3 to 15 V. The maximum current load of the module is up to 600 mA. By default, the module is in stand-by mode, to switch the module into normal operation mode, the high state should be given to the EN pin.
Features
- Input voltage: 3 to 15 V DC
- Output voltage: 3.3V
- Output voltage accuracy: ± 0.1V
- Maximum output peak current: 600 mA
- Max Efficiency: 85%
- Output ripple at full load: Vpp <50mV
- No-load current: IQ 150uA
- Low power consumption mode
- Working temperature: -40 ℃ to 85 ℃
- Working Humidity: 20% to 90% RH
- Dimensions: 17 x 13 mm
587679
Data sheet
- Output voltage
- 3,3 V
- Output current
- 0.6A
- Converter type
- Step-down/step-up
- Supply voltage min
- 2,5 V
- Supply voltages max
- 15 V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The energy harvesting module based on the LTC3588 chip, which is a complete energy harvesting solution for sources such as piezoelectric, solar or magnetic transducers. SparkFun BOB-09946
zł163.09
24h
Available quantity: 1
Available
A handy way to power 12V powered devices with a center-positive 2.1mm DC barrel jack from a USB port. Adafruit 2778
zł32.98
Delivery date unknown
No product available!
Modular power supply with a power of 3 W, input voltage from 100 to 240 V and output voltage of 3.3 V. Designed for mounting on a PCB. Hi-Link HLK-PM03
zł14.77
Delivery date unknown
No product available!
Step-Down XL4005 converter module with adjustable output voltage in the range from 0.8 to 30 V with a wide input voltage range from 4.5 to 30 V and a maximum output current of 5 A
zł19.35
24h
Available quantity: 19
Available
Other products in the same category (16)
Step-Up/Step-Down DC-DC converter module. It has an input voltage of 2.8 to 22 V, an output voltage of 3.3 V and a maximum output of 2.5 A to 3.5 A. Pololu 4980
zł71.91
24h
Available quantity: 1
Available
Pololu 5V Step-Up/Step-Down Voltage Regulator S7V7F5
zł28.99
24h
Available quantity: 5
Available
A DC-DC voltage converter, based on a combination of an LM2577S Step-Up converter and an LM2596S Step-Down converter. The input voltage can range from 3.5 V to 28 V, and the output voltage is adjustable from 1.25 V to 26 V
zł18.55
24h
Available quantity: 1
Available
The S9V11MACMA switching step-up/step-down regulator efficiently produces a finely adjustable output between 2.5 V and 9 V whether it is higher or lower than the input voltage, which can range from 3 V to 16 V. The regulator also has a precision-adjustable low-voltage cutoff with hysteresis that can be used to prevent battery over-discharge.
zł89.63
24h
Available quantity: 1
Available
DC-DC Step-Up / Step-Down converter module. It has an input voltage of 6 to 35 V and an output voltage of 1 to 33 V. The current efficiency of the inverter is 0.05 to 5 A. DFRobot DFR0946
zł40.25
24h
Available quantity: 5
Available
Step-Up/Step-Down converter with an output voltage of 3.3 V, an input voltage of 2.5 to 15 V and a maximum current of 600 mA. DFRobot DFR0568
zł19.95
24h
Available quantity: 9
Available
Pololu 2871 - 3.3V Step-Up/Step-Down Voltage Regulator w/ Adjustable Low-Voltage Cutoff S9V11F3S5CMA
The S9V11F3S5CMA switching step-up/step-down regulator efficiently produces a fixed 3.3 V (default) or 5 V (selectable) output whether it is higher or lower than the input voltage, which can range from 2 V to 16 V. (Note: minimum start-up voltage is 3 V, but it operates to 2 V after that.)
zł66.64
4 weeks
No product available!
This powerful step-up/step-down regulator efficiently produces an adjustable 4 V to 12 V output from input voltages between 3 V and 30 V while allowing a typical output current of up to 2 A when the input voltage is close to the output voltage and offering typical efficiencies of 80% to 90%.
zł124.54
4 weeks
No product available!
Step-Up/Step-Down DC-DC converter module. It has an input voltage of 2.8 to 22 V, an output voltage of 12 V and a maximum input of 2.5 A to 3.5 A. Pololu 4984
zł71.78
24h
Available quantity: 2
Available
No product available!
Step-Up/Step-Down DC-DC converter module that converts an input voltage from 3 V to 16 V to a voltage in the range of 2.5 V to 9 V. It has a current capability of up to 2 A. SparkFun COM-15208
zł69.19
3 weeks
No product available!
Step-Up/Step-Down converter with an output voltage of 3.3 V, an input voltage from 1.8 to 5 V and a maximum current of up to 100 mA
zł4.38
24h
Available quantity: 6
Available
Step-Up/Step-Down converter module based on the S13V30F5 system, input voltage from 2.8 to 22 V, output voltage 5 V. Current efficiency of the converter 4 A. Pololu 4082
zł72.96
24h
Available quantity: 2
Available
The Step-Up / Step-Down S18V20F12 inverter module gives the output voltage of 12V with a wide input voltage range of 3 ... 30V and a maximum output current of 2A. Polol 2577
zł134.93
4 weeks
No product available!
The Step-Up/Step-DownS10V4F5 Buck Voltage Regulator module with output voltage 5V, input voltage range of 2.5-18V and a maximum output current of 400mA. Pololu 2121
zł39.43
24h
Available quantity: 1
Available
DC-DC Step-Up/Step-Down Converter Module. It has an input voltage of 1.4 to 16 V, an output voltage of 3.3 V and a maximum output current of 1 A to 1.5 A. Pololu 4964
zł36.85
24h
Available quantity: 4
Available
Step-Up/Step-Down converter with an output voltage of 3.3 V, an input voltage from 3 to 15 V and a maximum current of up to 600 mA