

zł1,055.17 tax excl.
Test board for testing the emFile NAND controller and compatible memory devices. The base module with the STM32H743 microcontroller works with interchangeable adapters supporting different NAND Flash packages, providing flexibility in testing. Segger NAND Flash Evaluator (6.20.12)
SEGGER NAND Flash Evaluator is a platform designed to facilitate testing the emFile NAND driver. It consists of a base board with a microcontroller and an adapter board for connecting NAND Flash memory devices. The adapter connects to the base board via a dedicated connector, allowing the testing of various NAND memories in TSOP48 and VFBGA63 packages with an 8-bit or 16-bit data bus.
The device comes with an adapter featuring a TSOP48 socket, enabling direct memory testing without soldering. The base board is powered by a high-performance ST STM32H743 microcontroller, running at up to 400 MHz and equipped with 2MB of ROM and 383KB of RAM. A dedicated NAND Flash interface ensures high-speed data transfer between the microcontroller and the tested memory.
The device can be powered via a micro-USB port or through the debugging connector on the base board. A green LED indicates power presence, and the user can select the operating voltage (1.8V or 3.3V) using a jumper. Additionally, a dual-color LED (green/red) is available for signaling the device's operational status. The emFile software is provided as precompiled code along with a startup project that can be easily customized to fit specific requirements. JTAG tools, such as SEGGER J-Link, are required for programming and debugging.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Hi-Speed JTAG/SWD Emulator for ARM7/9, Cortex and Renesas RX cores with USB interface, Segger
Hi-Speed JTAG/SWD Emulator with USB and Ethernet interface, Segger
No product available!
JTAG/SWD Emulator for ARM7/9, Cortex and Renesas RX cores with USB interface, Segger
No product available!
The STM32U5G9J-DK1 is an advanced discovery kit with the STM32U5G9NJH6Q microcontroller, designed for rapid prototyping and evaluation of STM32U5-based applications. The kit offers a wide range of peripherals, such as USB, a TFT-LCD touchscreen display, and Arduino™ and STMod+ compatible connectors, making it ideal for developing IoT applications and portable devices.
Evaluation board with STM32 microcontroller and built-in ST-Link porgrammer/debugger
Evaluation kit equipped with STM32F401CCU6 microcontroller (ARM Cortex M4, 84MHz, 256kB Flash, 64kB RAM). It has two 20-pin connectors enabling the use of numerous microcontroller peripheral systems.
No product available!
The board is equipped with the STM32F405 microcontroller with the ARM Cortex-M4 core and SPI Flash memory, 20 GPIO pins, SD card slot, pins for connecting the battery with the charging and voltage stabilization circuit, JTAG connector and Qwiic socket. SparkFun DEV-17712
The STM32F7 discovery kit allows users to develop and share applications with the STM32F7 Series microcontrollers based on the ARM®Cortex®-M7 core.
IoT development board the size of Arduino, equipped with an ARM Cortex-M3 processor (STM32F205) and a Wi-Fi communication module (with an integrated antenna and uFL connector). SparkFun DEV-13321
Evaluation kit for the STM32L476ZGT6 microcontroller based on the STMicroelectronics ARM Cortex-M4 core. Equipped with three I²C buses, three SPI interfaces, six USART ports, CAN port, SWPMI, two SAI ports, 12-bit ADC converter, 12-bit DAC converter, LCD controller, internal memory and LCD controller. STMicroelectronics STM32L476G-EVAL
No product available!
Development kit with STM32F103VET6 microcontroller. Requires an external programmer with SWD or JTAG interface. Waveshare Core103V
No product available!
Wio development kit equipped with LTE 4G communication and a GNSS satellite navigation module. Seeed Studio 102991022
The KAmod BlackPill 401 is an evaluation board featuring the STM32F401CCU microcontroller, equipped with a USB-C connector with ESD protection and a modified power circuit. With a pre-installed bootloader, it supports Arduino IDE, offering 32 GPIOs and versatile programming and communication capabilities
Module with the STM32F746IGT6 microcontroller, including a base board and accessories. It contains modules with a display, USB, Ethernet, audio, microSD and a camera. Waveshare Open746I-C Package A
Universal minicomputer with STM32F103C6 microcontroller (ARM Cortex-M3 @72 MHz, 32 kB Flash, 10 kB RAM, LQFP48 package)
Development board equipped with STM32 series microcontroller (STM32H743IIT6). It is equipped with all the necessary elements for project development, requires an external programmer. Waveshare CoreH743I
No product available!
Kit with STM32F429IGT6 microcontroller, base board and accessories. Includes modules with display, USB, Ethernet, audio, microSD and camera. Waveshare Open429I-C Package A
No product available!
Test board for testing the emFile NAND controller and compatible memory devices. The base module with the STM32H743 microcontroller works with interchangeable adapters supporting different NAND Flash packages, providing flexibility in testing. Segger NAND Flash Evaluator (6.20.12)