NTC temperature sensor module - Crowtail Thermistor Temperature Sensor 2.0

The module with the MAX31850K amplifier is designed to work with a thermocouple. The board is equipped with a Grove connector and communicates via 1-Wire. Seeed Studio 101020555

Module with pressure, temperature and humidity sensor BME280. It allows to read the atmospheric pressure in the range from 300 to 1100 hPa and communicates via the I2C or SPI interface. Waveshare BME280 Environmental Sensor

The KAmod BMP280 contains a precise BMP280 sensor manufactured by Bosch Sensortec, which enables the measurement of atmospheric pressure and temperature. All key signals of the miniature BMP280 sensor are routed on the module board, facilitating its use in modular applications. Communication is carried out via SPI or I2C interfaces equipped with voltage level translation circuits.

Non-contact temperature sensor with a measuring range from -70 to 380°C. It uses infrared waves and has a current output. DFRobot SEN0264

Module with a non-contact IR temperature sensor. It allows the measurement in the range from -70 to 380°C and communicates via the I2C interface. Waveshare Infrared Temperature Sensor

The AM2315C is an advanced packaged temperature and humidity sensor offering easy integration with microcontrollers thanks to its 2.5V-5.5V power supply and standard I2C interface, providing greater resistance to external conditions than typical SHT sensors, with measurement accuracy of ±2% RH and ±0.3°C

Crowtail – Digital Temperature Sensor 2.0 is a precise TMP102 digital sensor with an I2C interface, operating in the range of –40°C to +125°C. Intended for use in temperature-measurement systems in automation, consumer electronics, and environmental monitoring.

Evaluation board with an IR thermometer MLX90614. The sensor is connected to the ATmega328 microcontroller working at a voltage of 3.3 V with the Arduino bootloader loaded. SparkFun SEN-10740

LHT52 Indoor LoRaWAN Air Temperature and Humidity Sensor US915 Seeed Studio 101990984 is a wireless air temperature and humidity sensor designed for smart home systems, offices, and industrial applications. Thanks to battery power, data logging, and LoRaWAN compatibility, it is suitable for environmental monitoring, building automation, and precision agriculture.

Module with CO2, temperature and humidity sensor SCD-41. Equipped with a Qwiic/STEMMA QT connector, it communicates via the I2C interface. Pimoroni PIM587

Digital temperature and humidity sensor module based on the DHT20 IC, offering high measurement accuracy, an I2C interface, and a wide supply voltage range, compatible with the Crowtail system. Elecrow CRT10251D

Module with environmental sensors for Raspberry Pi Pico. It allows you to measure temperature, humidity, air quality pressure and color detection. SB Components 22366

A module with a temperature sensor based on the absorption of infrared radiation. Enables non-contact measurement. modTMP006

Module with temperature and humidity sensor DHT11. It uses a 1-wire communication interface and has a humidity measurement range from 20 to 90% with an accuracy of 5% and temperature from 0 to 50 ºC with an accuracy of 2 ºC

Module with DHT11 temperature and humidity sensor designed for Wemos D1 Mini

Temperature and humidity sensor module based on the HTS221 chip. Equipped with a STEMMA QT connector, it communicates via an I2C or SPI interface. Adafruit 4535