

zł1.58 tax excl.
Color LEDs 4 mm, which is a solution between "ordinary" LEDs and fully addressable LEDs. The user cannot address every LED in the chain, but can change the color and mode of all LEDs in the chain. SparkFun COM-21209
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
Color LEDs 4 mm, which is a solution between "ordinary" LEDs and fully addressable LEDs. The user cannot address each diode in the chain, but can change the color and mode of all the diodes in the chain. "OWire" has no signal wire, only power and ground. To change the mode, change the state of the power LED in a 7-bit pattern depending on the mode/color you want. A single LED can be controlled via a GPIO pin, but if you want to put multiple LEDs in parallel, use a MOSFET for power signaling. Sample wiring diagrams and full documentation are available on the product page.
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
24 individually addressable RGB LEDs arranged in a closely spaced circle, controlled with a single digital output of a microcontroller. Adafruit 1586
Adafruit 2226
3mm green LED. 1000 pieces in the package
Rectangular LED 5x2 mm RED Diffused, angle 160 degrees; light intensity 30 mcd (20mA) (2.2V); df 635nm
LED 5 mm OVAL ultra white, angle 130 degrees / 70 degrees; light 3000 mcd (20mA) (3.2V)
Rectangular LED 5x2 mm WHITE milk diffused, angle 160 degrees; light intensity 300 mcd (20mA) (3.2V)
LED 5 mm tri-color angle 60 degrees, common anode, Orange - light intensity 45 mcd (20mA) (2.05V); df 632 nm, Green - light intensity 45 mcd (20mA) (2.25V); df 568 nm
LED 5 mm two-color angle 40 degrees common cathode, RED - luminous 1200 mcd (20mA) (2.0V); df 635 nm, Pure Green - light intensity 1200 mcd (20mA) (2.1V); df 519 nm
Easy-to-install indicator signaling the operation of devices or systems, with an attached resistor and adapted to work with 12V supply voltage
Rectangular LED diode 5x2 mm GREEN milk diffused, angle 160 degrees; light intensity 40 mcd (20mA) (2.1V); df 575nm
Module with RGB LED diode. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020048
No product available!
5 mm yellow LED. 1000 pieces in the package
LED 10 mm Red Diffused, angle 60 degrees; light intensity 300 mcd (20mA) (1.9V); df 627nm
Easy-to-install indicator signaling the operation of devices or systems, with an attached resistor and adapted to work with 12V supply voltage
Color LEDs 4 mm, which is a solution between "ordinary" LEDs and fully addressable LEDs. The user cannot address every LED in the chain, but can change the color and mode of all LEDs in the chain. SparkFun COM-21209