

zł812.20 tax excl.
WiFi 802.11b/g/n controller in the 2.4GHz band, offering simple integration with systems requiring a stable wireless connection. Thanks to SPI and UART interfaces and support for emPower emNet WiFi, it allows easy testing of WiFi solutions with minimal code changes and flexible adaptation to various applications. Segger emPower WiFi Module - Longsys/Arrow GT202 (6.37.04)
Longsys/Arrow GT202 module is a controller that supports WiFi networks IEEE 802.11b/g/n in the 2.4GHz band. It is a versatile solution designed for easy integration with systems requiring a stable wireless connection. The WiFi module has built-in software that is already installed, separating it from the main microcontroller's (MCU) firmware. The WiFi software in the module can be easily updated, providing flexibility in adapting to various user needs.
Thanks to communication interfaces such as SPI and UART, the module is compatible with a wide range of systems. emPower emNet WiFi is an additional module that allows testing multiple WiFi solutions by changing just one hardware component and a few lines of code. Code changes are minimal: usually, only two lines in the emNet configuration file need to be modified, and the data sending/receiving procedures in the host interface (typically SPI) must be adjusted. Furthermore, the solution can easily be transferred to custom hardware using existing examples from emPower.
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
WiFi controller supporting IEEE 802.11b/g/n standards in the 2.4GHz band, ideal for integration with embedded systems requiring reliable wireless communication. With SPI and UART interfaces and the ability to easily update the software, it is a versatile and energy-efficient solution that works well in IoT applications, automation systems and mobile devices. Segger emPower WiFi Module - Atmel ATWILC1000 (6.37.01)
No product available!
Advanced IEEE 802.11b/g/n WiFi controller in the 2.4GHz band and IEEE 802.11a/b/g/n 5GHz, providing versatility and easy integration with systems thanks to SPI, UART, SDIO and USB interfaces. The WiFi software in the module is pre-loaded, allowing easy updates, which increases flexibility and adaptation to various applications. Segger emPower WiFi Module - Redpine Signals RS9113 (2.4 + 5 GHz) (6.37.03.01)
No product available!
Advanced IEEE 802.11b/g/n WiFi controller in the 2.4GHz band, providing versatility and easy integration with systems thanks to SPI, UART, SDIO and USB interfaces. The WiFi software in the module is pre-loaded, allowing easy updates, which increases flexibility and adaptation to various applications. Segger emPower WiFi Module - Redpine Signals RS9113 (2.4 GHz) (6.37.03.02)
No product available!
Low power Wi-Fi module integrating wireless LAN and Cortex-M4 STM32F411CE microcontroller. It has 2 MB external flash memory, 512 KB bytes embedded flash memory, 128 KB RAM and peripherals. Seeed Studio 113990108
WiFI 802.11 b/g/n module. Equipment includes, among others: LED diode, antenna, 8 pins with 2.54mm pitch (including 3 GPIO lines). Power supply: 3.3V.
Board for applications in the area of the Internet of Things (IoT). The module is based on the ESP-WROOM-32E system with 240 MHz clock, equipped with 4 MB Flash and 520 KB SRAM, as well as WiFi and Bluetooth communication. DFRobot DFR0654
WiFi/BLE module that supports both the 2.4 GHz and 5 GHz WiFi bands, as well as Bluetooth Low Energy (BLE 4.2) communication. It has a u.FL connector dedicated to connecting an external antenna and a connector with a 2.54 mm pitch, which greatly facilitates prototyping. Tibbo WA2000U
UART to Wi-Fi 802.11 b/g/n converter module with external antenna, which can connect traditional serial device and MCU controlled device to Wi-Fi network for control and management. USR-WIFI232-B2
Development board with dimensions and spacing compatible with Arduino Uno R3. It have built-in Wi-Fi ESP8266 module. The device is compatible with WeDOS D1, it can be programmed from the level of Arduino IDE
WiFi module developed by AI-Thinker Co., Ltd with ESP8266 processor. Integrates a 32-bit MCU microcontroller with 80 MHz clock, RTOS support, Wi-Fi and antenna. The module supports the IEEE802.11 b / g / ni standard and has a complete TCP / IP protocol stack. AI-Thinker ESP-12S
WiFi/BLE module that supports both the 2.4 GHz and 5 GHz WiFi bands, as well as Bluetooth Low Energy (BLE 4.2) communication. It has a built-in chip antenna and 2.54 mm pitch connectors, which greatly facilitate prototyping. Tibbo WA2000C
Module from the ESP32 series, combining a powerful microcontroller, Wi-Fi and Bluetooth 4.2 BLE. ESP-WROVER-B has a built-in PCB antenna, a large number of GPIO lines and small dimensions. Adafruit 3979
RN-171 Series 54 Mbps 2.4GHz SMT WiFly GSX 802.11 b/g Wireless LAN module, MICROCHIP, RoHS
A WiFi overlay designed for the OpenMV camera that adds wireless internet connectivity. It is equipped with an ATWINC1500 WiFi module. SparkFun WRL-16776
No product available!
Wi-Fi bridge for short to medium-range network transmission. With the advanced iPoll 3 protocol and support for multiple services, it is ideal for various video surveillance scenarios. Its IP-66 rated housing ensures weather resistance
A small evaluation board with nRF52840 (ARM Cortex-M4) and WiFi ESP32-D0WD module for projects related to Mesh networks. Adafruit 3997
Intel\'s AX200 wireless communication module. It supports the 802.11AX Wi-Fi Generation 6 standard and Bluetooth 5.2, and features an M.2 A/E Key with NGFF interface. Waveshare Wireless-AX200
E-Paper ESP8266 Driver Board is a universal driver board for e-Paper displays. The board is based on the WiFi ESP8266 module. e-Paper ESP8266 Driver Board
Integrated circuit, combining Wi-Fi functionality and Bluetooth 4.2 BLE. Integrated 32-bit dual-core Xtensa LX6 processor, 448kB ROM, 520kB SRAM. ESP32 allows you to work with many interfaces, including SPI, I2C, UART, CAN, ETH, IR and can be supplied with 2.2V-3.6V. The system has a QFN48 (5x5mm) housing. ESP32-D0WD
WiFi 802.11b/g/n controller in the 2.4GHz band, offering simple integration with systems requiring a stable wireless connection. Thanks to SPI and UART interfaces and support for emPower emNet WiFi, it allows easy testing of WiFi solutions with minimal code changes and flexible adaptation to various applications. Segger emPower WiFi Module - Longsys/Arrow GT202 (6.37.04)