DFRobot MXChip Microsoft Azure IoT - evaluation kit for IoT

Intel\'s AX200 wireless communication module. It supports the 802.11AX Wi-Fi Generation 6 standard and Bluetooth 5.2, and features an M.2 A/E Key with NGFF interface. Waveshare Wireless-AX200

Miniature (25x40mm) WiFi b / g / n module with 2.0mm goldpin connection with TCP and UDP protocols operating in standalone and access point mode. The module is equipped with UART and Ethernet interfaces, it is also possible to control GPIO lines. Powered by 3.3V. HF-A11-1

The expansion board (shield) with the DA16200 WiFi module. It is equipped with a Qwiic connector and is an excellent solution for IoT projects. SparkFun WRL-18567

SimpleLink Wi-Fi CC3200 LaunchPad, TI, RoHS

WiFi 802.11 b/g/n module with ESP8266 system, they have 22 edge terminals with 2 mm raster with the possibility of soldered gold connectors, 9 GPIO lines and 1 ADC line on the connector. Built-in PCB antenna. ESP-12E

WiFi 802.11 b/g/n module with ESP8266 system, 16 terminals are available with a 2 mm pitch with the possibility of soldering gold pins, there are 9 GPIO lines and 1 ADC line on the connector. Built-in ceramic antenna and U.FL antenna connector. ESP-07

WiFi/BLE module that supports both the 2.4 GHz and 5 GHz WiFi bands, as well as Bluetooth Low Energy (BLE 4.2) communication. It has a u.FL connector dedicated to connecting an external antenna and a connector with a 2.54 mm pitch, which greatly facilitates prototyping. Tibbo WA2000U

A small evaluation board with nRF52840 (ARM Cortex-M4) and WiFi ESP32-D0WD module for projects related to Mesh networks. Adafruit 3997

Wi-Fi module based on the ESP8266 system - simplicity of use (communication through UART, supports AT commands), 3.3V power supply, support for WPA / WPA2 encryption - these features make the EPS8266 module applicable anywhere, where reliable and effective data transmission. The module is not equipped with an antenna, it should be attached using the U.FL connector. ESP-05

E-Paper ESP8266 Driver Board is a universal driver board for e-Paper displays. The board is based on the WiFi ESP8266 module. e-Paper ESP8266 Driver Board

SPWF01SC are intelligent Wi-fi modules. Thanks to the Plug-And-Play solution and the autonomous 802.11 b/g/n solution, the module has the ability to easily integrate the wireless function with existing or new products.

Development board in Feather format equipped with AW-CU488. The module has an integrated WiFi wireless communication controller, LiPo charging circuit and Qwiic connector. SparkFun DEV-19957

Advanced IEEE 802.11b/g/n WiFi controller in the 2.4GHz band and IEEE 802.11a/b/g/n 5GHz, providing versatility and easy integration with systems thanks to SPI, UART, SDIO and USB interfaces. The WiFi software in the module is pre-loaded, allowing easy updates, which increases flexibility and adaptation to various applications. Segger emPower WiFi Module - Redpine Signals RS9113 (2.4 + 5 GHz) (6.37.03.01)

Board for applications in the area of the Internet of Things (IoT). The module is based on the ESP-WROOM-32E system with 240 MHz clock, equipped with 4 MB Flash and 520 KB SRAM, as well as WiFi and Bluetooth communication. DFrobot DFR0654-F

Compact module for program-free data transmission from sensors to IoT platforms, designed to work with Gravity: Science Data Acquisition (SCI DAQ). With 2.4GHz operation, support for various power sources and auto-reconnection function, the module provides stability and reliability in smart classrooms, environmental monitoring, agriculture and automation. DFRobot TEL0180