Category: STARTER KITS, PROGRAMMERS, MODULES

Evaluation board with ATSAMD21E18 microcontroller (Cortex M0 +, 48 MHz, 256 KB Flash and 32 KB RAM). Equipped with a STEMMA QT connector. Adafruit 4600

ESP32-C3-LCD-0.71-B is a compact, energy-efficient module with an IPS display and wireless connectivity, featuring a protective enclosure and lens. Ideal for portable projects such as watches, graphic interface sensors, simulation systems, or touch-controlled devices. With support for LVGL and flexible expansion options, it is suitable for a wide range of embedded applications.

The module with the MCP96L01 amplifier designed to work with a thermocouple type K, J, T, N, S, E, B, or R. It has a screw connection for connecting a thermocouple and communicates via I2C. Adafruit 5165

ESP32-S3-Touch-AMOLED-1.43-B is a complete development board with a high-resolution AMOLED display, equipped with a modern ESP32-S3 microcontroller with Wi-Fi and Bluetooth LE, sensors, and extensive communication interfaces. The CNC enclosure ensures durability and aesthetics, making the solution suitable for mobile applications, wearable devices, HMI controllers, and measurement and control systems.

WiFi module with ESP8266 designed to work with the Raspberry Pi Pico. It communicates via the UART interface using AT commands. Waveshare Pico-ESP8266

Expansion board with L6474 stepper motor driver. It is equipped with a connector compatible with Arduino Uno R3 and STM32 Nucleo. STMicroelectronics X-NUCLEO-IHM01A1

Module with digital barometer BMP388. It measures pressure in the range from 300 to 1250 hPa and communicates via I2C or SPI. Adafruit 3966

A 30 cm long connecting cable (4 wires) designed for use with Kamami KAmod modules. It is terminated on both ends with a plug that fits the WF04S connector that KAmod modules are equipped with. cabhu04-30

Multifunctional micro:bit expansion module with built-in Li-Ion battery. The board is equipped with a two-channel DC motor driver, 9 IO pins, I2C, UART interface, buzzer, 4 RGB LEDs and a charging circuit. DFRobot MBT0005

Module with a digital barometer DPS310. It enables pressure measurement in the range from 300 to 1200 hPa and communicates via I2C or SPI. Adafruit 4494

A compact ePaper display control board designed for Seeed Studio XIAO microcontrollers. Equipped with a 24-pin FPC connector and an ETA9740 charging chip, it safely powers and charges 3.7V Li-Ion batteries. It also includes a JST connector with a power switch and IO ports for connecting additional sensors. Seeed Studio 114993558

NFC module with built-in antenna on the board. The module has a Gravity connector. Memory communication can be done through one of the serial interfaces: UART or I2C. DFRobot DFR0231-H

The ESP32-C6-LCD-1.47 development board with a 1.47" display is a high-performance solution for projects based on the ESP32-C6, offering support for Wi-Fi 6 and Bluetooth 5 LE. With its compact design, GPIO expansion, TF card slot, and visually appealing enclosure with an RGB LED, the module is suitable for AIoT projects, user interfaces, and systems requiring low power consumption and wireless communication.

Module with a GPS receiver based on the MTK3333 chip. It is equipped with a STEMMA QT connector and communicates via the UART or I2C interface. Adafruit 4415

Module with a 4-inch touch display that uses two MCU systems (ESP32-S3 and RP2040) and supports Wi-Fi, BLE and LoRa communication. The board is equipped with USB Type C, I2C (Grove) and analog inputs interfaces and can easily connect to other peripheral devices. Seeed Studio 114993070

Module with a button and re LED backlight. Controlled by the I2C interface, it has a built-in debouncing mechanism, pull-up resistors as well as interrupts and a FIFO queue. SparkFun BOB-15932

Espressif ESP32-S3 WiFi and Bluetooth LE module board. It offers 16 MB of flash memory and 2 MB of SRAM. The pinouts are compatible with the HAT modules for the Raspberry Pi Pico. Waveshare ESP32-S3-Pico-M

ESP32-S3-Touch-LCD-1.85 is an advanced development board based on the ESP32-S3, offering Wi-Fi 6 and Bluetooth 5 connectivity, a 1.85″ IPS touchscreen with 360×360 resolution, and numerous peripheral functions such as audio, TF card, and motion sensors. The integrated components make it an ideal choice for HMI interfaces, speech recognition projects, AI applications, and multimedia control.

ESP32-S3-LCD-2-C is an integrated development board with a 2" display and an included OV5640 camera, combining display, wireless connectivity, and video acquisition functions in a single module. Thanks to support for an accelerometer, TF card slot, USB-C power supply, and extensive GPIO interfaces, the board is suitable for applications such as portable monitoring systems, image recording, and interactive IoT projects.

ESP32-S3-Touch-AMOLED-1.91 enables the development of advanced user interfaces and IoT applications with touch support. Thanks to the AMOLED display, motion sensor, PSRAM memory, and wireless connectivity, it performs well in mobile HMI panels, interactive systems, and smart devices. The connector-free design allows for easy integration in custom-mounted projects.