Camera module based on the CMOS MT9V022 matrix with a resolution of 752x480 px (0.36 MPx). Designed for use with ArduCAM USB Shield. ArduCAM B0109

The module with SSR BT136S relay with a load of up to 2 A, designed for M5Stack sets. The board is equipped with a Grove connector and is controlled by a digital input. M5Stack U122

The module with a 10 kΩ slide potentiometer and a color LED indicator, designed for the M5Stack sets. M5Stack U123

DC-DC Step-Down Converter ME3116AM6G with an output voltage of 5 V, input voltage from 6 to 24 V and a maximum output current of 1 A. Dedicated to the M5Stack modules. M5Stack U125

Module with 42 RGB LEDs WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020173

Module with a pressure sensor with high accuracy HP206C. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020068

Vertical Grove socket for through-hole mounting, 4-pin, pitch 2.0 mm. Set of 10 pieces. Seeed Studio 110990030

Graphic display 128x64, 45x40mm, Type: COG, small sizes, FFSTN, 3.3V, ST7565R outline

A module dedicated to projects related to traffic lights and pedestrian crossings. It is fully assembled, which eliminates the need for soldering. Thanks to the shape resembling a real traffic light and three LEDs powered directly from the micro:bit I/O pins, it allows easy programming and expansion of projects with additional traffic lights using radio communication, which allows for the study of traffic management in the city. Kitronik 5642

Pololu - 2511

Graphical display 128x64 pixels, 92x53.6 mm, extended temperature range, controller: ST7565R

Module with replaceable LED diodes in 4 colors: red, green, blue and white. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020228

A4990 Dual Motor Driver Carrier

4-port HUB module with USB 2.0 interface designed to work with the Raspberry Pi minicomputer. Waveshare USB HUB HAT (B)

Touch panel for displays with a diagonal of 5.6 ", 126.5x101mm, resistive touchpanel, tape for ZIFF 4 1mm connector

HiFi stereo tube amplifier based on 6J1 and 6P1 tubes. Designed for use with loudspeakers up to 3 W and an impedance of 4 Ω or 8 Ω

A set with a camera with a resolution of 1 MPx with an OV9281 sensor, a USB 2.0 adapter and a cable. ArduCAM EK023

Matrix module of six reflection sensors for the Zumo robot. The module allows you to easily add line detection or edge detection to the robot. Pololu 1419

Knit conductive 100% silver fabric with resistance of less than 1 ohm per foot in any direction across the textile. Great for use with FLORA. 20 cm x 20 cm piece. Adafruit 1167