This camera features a 1-megapixel sensor and a global shutter. It records video at 1280x720 pixels at up to 120 fps, making it ideal for industrial, robotic, and research applications. Its wide-angle M12 (120°) lens without an IR filter ensures high image quality in various lighting conditions. Thanks to its USB Type-C interface and support for MJPG and YVY2 formats, the camera is easy to integrate with machine vision and AI systems. Waveshare OV9281 1MP USB Camera (A)

LCD graphic display 128x64, KS0108 LCD controller, NEGATIVE BLUE, LED backlight (white), 1x20 pin header for evaluation boards

A compact camera module with a Sony IMX335 sensor, offering 5MP (2592 x 1944) resolution and 2K @ 30 FPS video support. Thanks to WDR technology and high low-light sensitivity, it delivers clear and detailed images in all conditions. The camera uses a 3.25mm M12 lens with a wide 91.7° viewing angle and minimal distortion, supports MJPG and YUY2 formats, and is plug & play thanks to the USB 2.0 interface. A built-in microphone enables audio recording, making it ideal for machine vision, surveillance, AI, and video conferencing systems. Waveshare IMX335 5MP USB Camera (C)

This energy-efficient black-and-white e-Paper display with a resolution of 1360 x 480 pixels provides a clear image even in direct sunlight. With a wide viewing angle of over 170° and zero power consumption in idle mode, it\'s ideal for applications requiring constant information display. It supports the SPI interface and is compatible with Raspberry Pi, Arduino, STM32, and ESP32. Waveshare 10.85-inch e-Paper

AVR ISP-MC CAN 128k Flash 16MHz TQFP64

The BLOW FMM603 car antenna offers efficient FM and AM signal reception with a compact 40 cm mast. Its universal thread and included adapters make it compatible with most vehicles, providing easy installation and durable construction.

DMOS Full Bridge Driver, Multiwatt11, STM, RoHS

USB-C to USB-C and 3.5 mm Jack adapter allows simultaneous charging and music listening on devices without an audio port. With a built-in DAC converter, it provides high sound quality and broad compatibility.

8-bit, 32k Flash, 512B RAM, 33MHz PLCC44, Atmel

Graphic LCD 240x64 with LED backlight (White), FSTN, character generator, negative voltage generator, T6963C controller

Touchpanel for 128x64 A-series displays, 81.8x52.2mm, 2.54 mm IDC connector

Cable with USB plugs type A and mini-USB type B, cable with a length of 1.8 m

This SPST solid-state relay module allows for safe switching of DC circuits up to 60 V and 7 A, offering galvanic isolation and low conduction resistance (approx. 30 mΩ) thanks to the use of back-to-back MOSFET transistors. It features fast switching time (up to 1 ms), low control current consumption (approx. 10 mA), and the ability to control a signal from 2.7 to 40 V. Its compact design, lack of mechanical components, and the ability to mount on 2.54 mm connectors or screw terminals make the module a durable and quiet solution for systems requiring reliable isolation and long service life. Pololu 5420

This module provides precise, galvanically isolated current measurement within a range of ±30 A and voltage up to 480 VRMS, providing RMS, instantaneous, and active, reactive, and apparent power readings. Equipped with an I²C interface, 4-pin JST SH connectors, and 2.54 mm pins, it allows for easy integration with Qwiic, STEMMA QT, and standard microcontrollers. Configuration stored in EEPROM allows for defining address and overload thresholds. The sensor offers three voltage measurement ranges (120 V - default, 240 V, 480 V RMS) and the ability to detect overvoltages. Built-in protection and low conduction resistance ensure safe and accurate measurements. The version comes with soldered screw terminals and a 240 Vrms jumper. Pololu 5412

This module provides precise, galvanically isolated current measurement within a range of ±30 A and voltage up to 480 VRMS, providing RMS, instantaneous, and active, reactive, and apparent power readings. Equipped with an I²C interface, 4-pin JST SH connectors, and 2.54 mm pins, it allows for easy integration with Qwiic, STEMMA QT, and standard microcontrollers. Configuration stored in EEPROM allows for defining address and overload thresholds. The sensor offers three voltage measurement ranges (120 V - default, 240 V, 480 V RMS) and the ability to detect overvoltages. Built-in protection and low conduction resistance ensure safe and accurate measurements. The version comes with soldered screw terminals. Pololu 5411

This module provides precise, galvanically isolated current measurement within a range of ±30 A and voltage up to 480 VRMS, providing RMS, instantaneous, and active, reactive, and apparent power readings. Equipped with an I²C interface, 4-pin JST SH connectors, and 2.54 mm pins, it allows for easy integration with Qwiic, STEMMA QT, and standard microcontrollers. Configuration stored in EEPROM allows for defining address and overload thresholds. The sensor offers three voltage measurement ranges (120 V - default, 240 V, 480 V RMS) and the ability to detect overvoltages. Built-in protection and low conduction resistance ensure safe and accurate measurements. Pololu 5410

This ideal diode module allows for safe connection of two power supplies to a common output point, preventing reverse current flow. Built-in 20mΩ resistors allow for simple voltage compensation and load balancing between the power supplies. The board offers flexible input and output connectors, facilitating integration into industrial and hobby systems requiring high power reliability. Pololu 5398