DFRobot SEN0209

DAC converter module with current output in the range of 0 to 25 mA. It is powered by 18 V to 24 V and communicates via I2C interface (Gravity connector). It is used as a controller in industrial applications. DFRobot DFR0972

Module with LCD TFT 1.44" display with a resolution of 128x128 px. It communicates via the SPI interface. ModTFTdisp1.44"

Precision Hall effect current sensor offering galvanic isolation, wide bandwidth of 150 kHz and the ability to measure AC and DC current with very low power loss. Thanks to differential measurement and immunity to magnetic interference, it is perfect for applications requiring accurate current monitoring, such as power supplies, converters or motor control systems. Pololu 5293

Module with a stepper motor driver based on the DRV8834 system. It allows you to power a bipolar motor with a current of up to 2 A per phase, without using a heat sink. The system can be powered with a voltage of up to 10.8 V. Pololu 2134

The portable power supply for electroluminescent wires is powered by two AA (R6) batteries, it has a built-in diode signaling the operating mode and a power supply output in the form of a wire terminated with a JST connector. The device also has a clip that allows you to hang them on trousers

Universal silicone cover that protects the LED strip from moisture, water, and dirt. Provides protection in accordance with the IP67 standard.

Universal silicone cover that protects the LED strip from moisture, water, and dirt. Provides protection in accordance with the IP67 standard.

Class D mono audio amplifier module with MAX98357 chip. It can work with a 4 to 8 Ω loudspeaker with a power of up to 3 W and communicates via the I2S interface. modMAX98357

Class-D mono audio amplifier module based on the MAX98357 chip. It can work with a 4 to 8 ohm speaker of up to 2.5 W and communicates via an I2S interface. DFRobot DFR0954

Universal silicone cover that protects the LED strip from moisture, water, and dirt. Provides protection in accordance with the IP67 standard.

Precision Hall effect current sensor offering galvanic isolation, wide 150 kHz bandwidth and the ability to measure AC and DC current with very low power loss. With differential measurement and immunity to magnetic interference, it is perfect for applications requiring accurate current monitoring, such as power supplies, converters or motor control systems. Pololu 5290

Module with real-time clock and CR1225 battery socket for voltage backup. It communicates via the I2C interface. Seeed Studio 103030277

The vehicle tracker plugs directly into a cigarette lighter socket and uses 2G GSM/GPRS connectivity, multi-constellation GNSS, and Bluetooth 4.0 LE. An integrated button, RGB indicator, buzzer, and USB-A port for charging external devices support vehicle monitoring and fleet management applications. Teltonika FMP100

Current sensor in the Large Carrier version based on the ACS72981ELRATR-200U3 chip, designed for unidirectional current measurement from 0 A to 200 A with a 3.3 V supply voltage. The module uses Hall-effect sensing, an electrically isolated current path, and an analog output signal proportional to the measured current. Pololu 5283

Current sensor in the Large Carrier version based on the ACS72981ELRATR-200B5 chip, designed for bidirectional current measurement from -200 A to +200 A with a 5 V supply voltage. The module uses Hall-effect sensing, an electrically isolated current path, and an analog output signal proportional to the measured current. Pololu 5282

Light to Digital Converters, TAOS, RoHS

Current sensor in the Large Carrier version based on the ACS72981KLRATR-150U5 chip, designed for unidirectional current measurement from 0 A to 150 A with a 5 V supply voltage. The module uses Hall-effect sensing, an electrically isolated current path, and an analog output with a sensitivity of 26.7 mV/A proportional to the measured current. Pololu 5280

The MR60BHA2 sensor kit uses 60GHz mmWave technology to reliably detect human presence, as well as human breathing and heartbeat detection. It offers Home Assistant integration thanks to the XIAO ESP32C6 module and pre-installed ESPHome firmware. Equipped with a BH1750 light intensity sensor, RGB LED indicator and the possibility of expanding with Grove sensor modules, it is ideal for monitoring health, safety and home automation. Seeed Studio 114993387

Pmod I2S2 is a module with 24-bit A / C and D / C audio converters derived from standard 3,5 mm Jack connectors. Thanks to them, it is possible to send and receive stereo audio signals using the I2S protocol. Digilent 410-379