Set with OpenLog Artemis data logger. The set includes an I2C expander, a strain gauge module, a USB type C cable, a 1250 mAh LiPo battery, a 1 GB microSD card and all the necessary Qwiic cables. SparkFun KIT-18295

A cryptography kit that allows you to learn the basics of cryptographic authentication and the ATECC508A cryptographic co-processor. SparkFun KIT-18303

Bluetooth module with integrated HC-08 system. Thanks to the angular pin connector with the bus signals, it is possible to easily connect the module to the contact plate or wires

2-position waterproof self-locking rotary switch, 19 mm in diameter, in a stainless steel housing. White colour

Module with ACS724 current sensor with a measuring range of direct and alternating current from 0 to 10 A. It communicates via an analog interface. Pololu 4045

Module with ACS724LLCTR-05AB current sensor with a measuring range of direct and alternating current from -5 to 5 A. It communicates via an analog interface. Pololu 4041

Grey mechanical keyboard switches. They can be used for a wide range of projects, including when building a proprietary, non-standard mechanical keyboard. They make a audible sound every time you press a key

Step-Down converter D36V50F9 with an output voltage of 9 V, an input voltage from 9.9 to 50 V and a maximum output current of 7 A. Pololu 4094

RFID tag for systems operating at 125 KHz. Provides the ability to read and write a unique ID number

BMP390 digital barometer module. Measures pressure from 300 to 1250 hPa and temperature from -40℃ to 85℃. It communicates via an I2C or SPI interface. Waveshare BMP390 Barometric Pressure Sensor

The trigger module is designed for chargers PD 2.0 and PD 3.0. It is equipped with a USB type C input and an output in the form of pads. Allows powering devices with 20V. PDC004

Board with the NB-IoT SIM7020E module designed for the Raspberry Pi Pico. It communicates via the UART interface and AT commands. Waveshare Pico-SIM7020E-NB-IoT

A set with a 2 DOF control platform for cameras designed for Raspberry Pi, Nvidia Jetson Nano and Xavier NX. It is based on two digital servos and dedicated board. ArduCAM B0283

LetsTrust TPM cryptographic module featuring the Infineon OPTIGA SLB 9672 chip, compliant with the TPM 2.0 Rev. 01.59 specification. Supports secure cryptographic key storage, authentication, digital signatures, and hardware-based true random number generation (TRNG). Communicates via the SPI interface and is compatible with Raspberry Pi single-board computers, including Raspberry Pi 5. Occupies 10 pins of the GPIO header, leaving the remaining pins available for other applications. LetsTrust TPM.

Set of 10 cables, 50 cm long, for digital sensors compliant with the Gravity standard. DFRobot FIT0756

Step-Up converter with an output voltage of 5 to 28 V, an input voltage of 2 to 24 V and a maximum current of 2 A

Mini MP3 player with microSD card support. It can work as a separate device and play sounds from the card or be controlled via the UART serial interface.

Camera set with IMX477 sensor with 12 MPx matrix, allows for remote camera rotation, tilt angle and zoom control. Works with Raspberry Pi minicomputers. Swivel base included. ArduCAM B0167B12

Angled male socket, wire-board type, for JST PH-2.0 wires, 10-pin, 2mm pitch, 100V, 2A. Set of 10 pieces

RGB LED driver module equipped with ATtiny1616 microcontroller and STEMMA QT connector. It uses a 3.3V/5V voltage level converter and allows you to control the popular Neopixel LEDs. Adafruit 5766