BMP390 pressure sensor module - Waveshare 24658
ID: 1185240
5906623423699
zł53.73
Tax included
zł43.68 tax excl.
BMP390 digital barometer module. Measures pressure from 300 to 1250 hPa and temperature from -40℃ to 85℃. It communicates via an I2C or SPI interface. Waveshare BMP390 Barometric Pressure Sensor
Description
BMP390 digital barometer module. It allows pressure measurement in the range of 300 to 1250 hPa with an accuracy of ±3 Pa, giving an accuracy of 0.25 m with respect to altitude. The system also allows temperature measurement from -40℃ to 85℃. The sensor uses Bosch's piezoresistive pressure sensor technology with high accuracy, low power consumption and high immunity to electromagnetic interference, making it ideal for industrial applications. It can work with systems with an operating voltage of 3.3 V or 5 V, and communication is via an I2C or SPI interface. Full documentation with examples is available on the product page.
Features
- Pressure measurement range: 300 to 1250 hPa
- Relative accuracy: ± 3 Pa (± 0.25 m at 700-1100 hPa, 25℃-40℃)
- Absolute accuracy: ± 50 Pa
- Temperature coefficient: ± 0.6 Pa/K (-20℃-40℃ at 900 hPa)
- Temperature measurement range: -40℃ to 85℃
- Interface: I2C or SPI
- Voltage level converter
- Measurement frequency: 200 Hz
- Voltage: 3.3 V or 5 V
- Dimensions: 32 x 20 mm
Kit contains
- BMP390 Barometric Pressure Sensor
- PH2.0 5-pin cable
1185240
Data sheet
- Interface
- SPI/I2C
- Type of sensor
- Power supply voltage
- 3 - 5 V
- Sensor type
- Ciśnienia atmosferycznego
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.42
Delivery date unknown
No product available!
NUCLEO series starter kit equipped with STM32G474RE microcontroller (512 kB Flash, Cortex-M4), with built-in programmer-debugger ST-Link-V3E, equipped with connectors compatible with Arduino.
zł97.56
Delivery date unknown
No product available!
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
zł220.90
Delivery date unknown
No product available!
Other products in the same category (16)
Module with a digital barometer DPS310. It enables pressure measurement in the range from 300 to 1200 hPa and communicates via I2C or SPI. Adafruit 4494
zł35.79
24h
Available quantity: 3
Available
Module with digital barometer ICP-10111. The system enables pressure measurement in the range from 300 to 1100 hPa with an accuracy of 1 Pa. DFRobot SEN0516
zł33.91
24h
Available quantity: 3
Available
Available
Grove module with temperature, humidity and pressure sensor. The board is equipped with a Grove connector and communicates via I2C or SPI. Seeed Studio 101020193
zł92.99
24h
Available quantity: 3
Available
LPS28DFW absolute pressure sensor module. The chip features a wide measurement range of 260 to 1260 hPa or 260 to 4060 hPa and a high accuracy of 0.5 hPa. It communicates via an I2C interface. SparkFun SEN-21222
zł154.12
24h
Available quantity: 2
Available
Module with temperature, humidity and pressure sensor BME680 from Bosch. The module communicates via I2C or SPI interfaces.
zł45.77
24h
Available quantity: 6
Available
Module with digital barometer BMP388. The system measures pressure in the range from 300 to 1250 hPa and temperature from -40 ℃ to 80 ℃. DFRobot SEN0251
zł31.38
4 weeks
No product available!
Miniature pressure measurement module equipped with a 25 psi piezoresistive pressure sensor. It allows you to perform calibrated and compensated pressure measurements from 60 mbar to 2.5 bar. SparkFun SEN-16476
zł207.73
24h
Available quantity: 1
Available
Module with pressure and temperature sensor BMP280. It allows to read the atmospheric pressure in the range from 300 to 1100 hPa and communicates via the I2C interface. Pimoroni PIM411
zł57.97
24h
Available quantity: 4
Available
The MPX5700AP air pressure sensor with a measuring range from 15 to 700 kPa. It communicates via the I2C interface. DFRobot SEN0456
zł331.66
24h
Available quantity: 1
Available
Module with a pressure, temperature and humidity sensor based on the MS8607. Equipped with a STEMMA QT connector, it communicates via the I2C. Adafruit 4716
zł75.89
24h
Available quantity: 1
Available
Module with pressure and temperature sensor BMP280. The board is equipped with a Grove connector and communicates via the I2C or SPI interface. Seeed Studio 101020192
zł60.63
24h
Available quantity: 2
Available
KAmod BMP390 contains a precise BMP390 sensor manufactured by Bosch Sensortec, enabling the measurement of atmospheric pressure and temperature. All key signals of the miniature BMP390 sensor are routed on the module board, facilitating its use in modular applications. Communication is carried out via SPI or I2C interfaces equipped with voltage level translation circuits.
zł31.89
24h
Available quantity: 96
Available
Module with a digital barometer LPS22. It enables pressure measurement in the range from 260 to 1260 hPa and communicates via I2C or SPI. Adafruit 4633
zł38.50
24h
Available quantity: 2
Available
Module with BME680 for measuring the concentration of VOC, pressure, temperature and humidity. Equipped with a STEMMA QT connector, it communicates via I2C or SPI. Adafruit 3660
zł105.20
24h
Available quantity: 1
Available
Gravity: High Accuracy is a multifunctional environmental sensor with Gravity I2C and UART output. Perfect for weather station projects. DFRobot SEN0501
zł136.36
4 weeks
No product available!
BMP390 digital barometer module. Measures pressure from 300 to 1250 hPa and temperature from -40℃ to 85℃. It communicates via an I2C or SPI interface. Waveshare BMP390 Barometric Pressure Sensor