A two-channel DC motor controller with a UART TTL interface. It is powered from 4.5 V to 48 V and can deliver up to 1.8 A per motor. Board with soldered connectors. Pololu 5066

LCD display 2x16, 80x36mm, LED backlight (RED), mark 4.24mm, RoHS. ART016002E33-DIR-R

A module that provides a regulated, galvanically isolated power supply. It allows easy changing of the output voltage from 5 V to 3.3 V using the voltage selection pin (VSEL). Galvanic isolation between input and output effectively prevents problems related to ground loops and ground currents, ensuring stability and protection of the system. Pololu 5384

ABC016002C41-DLW-R LCD display 2x16, 122x44mm, BIG, LED backlight (WHITE)

The module protects the load against reverse polarity to -60 V and blocks the flow of reverse current to the power supply. It uses the LM74700-Q1 ideal diode controller and a MOSFET transistor. Thanks to its low impedance (10 mΩ), it supports currents up to 10 A continuous and 00 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5382

STM32H753VIT6, 32-bit microcontroller, Arm Cortex-M7 with 2 MB Flash, 1 MB RAM, 480 MHz, DSP with DP-FPU, HW Crypto, LQFP100

RC extension cable dedicated to servos, comes with JR/Futaba female and male connectors. It has twisted wires

BMP390 digital barometer module. Measures pressure from 300 to 1250 hPa and temperature from -40℃ to 85℃. It communicates via an I2C or SPI interface. Waveshare BMP390 Barometric Pressure Sensor

A 0.96-inch blue OLED display that allows basic graphics and text to be displayed. It has a resolution of 128 x 64 pixels and communicates via an SPI or I2C interface. Waveshare 0.96inch OLED Module (E)

The 4.3-inch IPS LCD display has a resolution of 800 x 480 pixels. It has a thin and lightweight design and communicates via the DSI interface. Waveshare 43H-800480-IPS

Locking ring for M12 mount lenses. Arducam U6136

The ACS71240 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 120 kHz) and low conduction resistance (0.6 mΩ), it minimizes energy loss and offers a fast response time of less than 5 µs. Pololu 5241

The 5-inch IPS LCD display has a resolution of 800 x 480 pixels. It has a thin and lightweight design and communicates via the DSI interface. Waveshare 50H-800480-IPS

Module with a dust sensor PPD42NS. The board is equipped with a Grove cable and communicates via the PWM interface. Seeed Studio 101020012

Programmable time module with relay, allows you to set the time and manner of relay reaction on the trigger signal, has a built-in LED display. It can be supplied with voltage from the range of 6 - 30VDC or using the microUSB connector

HDMI-USB adapter dedicated to video capture and transfer to devices with a USB Type A connector. It supports resolutions up to 4K with a refresh rate of 30 Hz. Waveshare HDMI to USB3.0 Adapter

The high power motor driver module works on the basis of Infineon BTS7960B systems. Maximum controller current: 43 A, operating voltage range: 5.5V - 27V. The module has a heat sink and can be controlled from the Arduino, Raspberry Pi, and STM levels. IBT_2

The RFID / NFC transponder reader module (tags) works in the PN532 chip and is compatible with Arduino. Data is available via SPI, I2C or HSU (High Speed UART). Supplied with a RFID card and key ring. ELECHOUSE NFC MODULE V3

OV5647 camera set with a matrix with a resolution of 5 MPx. The attached lens allows remote zoom control. Works with Raspberry Pi. ArduCAM B01675MP

Case for SFP + 1x4 transceivers, THT assembly. Molex 0747540420