PRT-14417

The SN74LVC1T45DRLR from Texas Instruments is a single-channel, bidirectional voltage level translator, covering a range from 1.65 V to 5.5 V, ideal for signal conversion in microprocessor systems and mobile devices. With automatic detection of the transmission direction and a compact SMD SOT-5X3 package, the device is easy to implement and works well in limited mounting spaces.

Small GPS location module with L80-39 GPS chip, USB and TTL two ports,easy to be used with Raspberry Pi, Arduino, STM32 and other kind of micrcontrollers. The GPS module uses NMEA0183 communication protocol, integrated ultra-small SMA antenna connector. DFRobot TEL0119

Pin strip straight in red, single-row, female, 1x6, pitch 2.54mm, THT, RoHS. PB06S RED. Set of 10 pieces

A set with a vibration generator designed to transfer sounds through the human skeleton to the auditory center. DFRobot KIT0126

Pin strip straight in yellow, single-row, female, 1x6 contacts, pitch 2.54mm, THT, RoHS. PB06S YELLOW. Set of 10 pieces

Module with an incremental encoder with a rotation range of 360° and a button. Communicates via a digital interface. DFRobot SEN0235

An axial DC fan with dimensions of 40x40x10mm operates in the voltage range of 4.5-13.8V with a rotational speed of 7000 rpm. The device has a low noise level of 27.3dBA and is made of thermoplastic with an operating temperature range from -10 to 70°C.

PB07R. Angular contact strip in black, single-row, female, 1x7, pitch 2.54mm, THT, RoHS. Set of 10 pieces

GEMMA M0 is an intelligent clothing controller from Adafruit. In relation to the classic GEMMA board, it was equipped with a 32-bit ATSAMD21E18 microcontroller (based on Cortex M0 +). It has GPIO pins, RGB DotStar diode. The board can be powered by a 3.7 V Li-Ion battery (JST connector). Adafruit 3501

PB08R. Angular contact strip in black, single-row, female, 1x8, pitch 2.54mm, THT, RoHS. Set of 10 pieces

Laser rangefinder with measuring range up to 22m. The current consumption is up to 200mA and the supply voltage 4.5 ... 6V. Communication via UART or CAN interface. DFRobot SEN0238

Pin strip straight in red, single-row, female, 1x8, pitch 2.54mm, THT, RoHS. PB08S GREEN. Set of 10 pieces

The Tic T825 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our free software. The controller supports six control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), quadrature encoder, and hobby radio control (RC). 

The Tic T825 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our free software. The controller supports six control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), quadrature encoder, and hobby radio control (RC).

Integrated circuit - temperature sensor; working temperature from -40 to 100 ° C; TO92; THT, STMicroelectronics. Accuracy ± 1 ° C

Pin strip straight in blue, single-row, female, 1x10, pitch 2.54mm, THT, RoHS PB10S BLUE. Set of 10 pieces

Plug housing, 2x10, 2.54mm, for wire, RoHS. Set of 10 pieces

The TLP2348-E-T optocoupler with totem-pole output offers high switching speed and isolation up to 3.75 kV in a compact SO6 package. Designed for high-frequency systems, power conversion, and precise signal transmission in high-noise environments.

The GY-87 module is composed of a module with MPU6050, QMC5883L and BMP180 sensors, allowing the measurement of traffic in nine axes and the measurement of atmospheric pressure. The module has a built-in 3.3 V voltage stabilizer