Category: Distance sensors
There are 194 products.
Module with ToF VL53L4CX sensor with a range of up to 6 m. It is equipped with a STEMMA QT connector and communicates via the I2C interface. Adafruit 5425
LiDAR sensor using distance measurement technology based on the principle of triangulation. It offers a measurement range from 25 to 300 mm and a measurement frequency of 28 Hz, thanks to which it ensures fast and effective data acquisition in various environmental conditions. DFRobot DFR1030
Time-of-Flight VL53L3CX Distance Sensor Expansion Board. The set is designed to measure distances and detect gestures. Distance measurement was carried out using VL53L3CX laser sensors. STMicroelectronics X-NUCLEO-53L3A2
Suitable for outdoor applications such as car reversing sensors, security alarms, industrial inspection, etc. SEN0207
Ultrasonic ToF sensor dedicated to the identification of materials at a distance of 2 to 10 cm. It can distinguish between hard and soft materials and transmits information via digital IO (high/low) or UART interface. DFRobot SEN0560
Laser distance sensor with a measuring range of up to 4 m based on the ToF measurement technique. Communication with the module takes place via the I2C interface. Pimoroni PIM373
Module with integrated proximity and ambient light sensors and IR emitter in the VCNL4040 system. It allows the detection of obstacles in the range of 0 to 20 cm (no dead zone). It communicates via the I2C bus. SparkFun SEN-15177
Module with a digital distance sensor with a range of up to 100 cm. It has a digital output that goes low when an object is detected. Pololu 4069
Module with a distance sensor with a range of up to 130 cm. It has a digital output that generates a pulse with a width proportional to the measured length. Pololu 4071
ToF laser rangefinder. It enables detection of many objects, has a field of view of about 25 ° and is able to detect objects at a distance of up to 5 m. Communicating via the I2C interface. Pololu 3416
ToF VL53L0X distance sensor module designed for M5Stack sets. It allows you to measure distances up to 2 m and communicates via the I2C interface. M5Stack U072
Ultrasonic distance sensor module with a range of up to 720 cm. It communicates via UART, I2C or PWM interface. It is compatible with 3.3V or 5V devices. GY-US12V2
Ultrasonic distance sensor determines the distance to a target by measuring time lapses between the sending and receiving of the ultrasonic pulse. This ME007YS Waterproof Ultrasonic Sensor features high accuracy, steady data output and a certain penetration power(smog, dust). SEN0312
IR distance sensor with a range of up to 400 cm. It has a digital output that changes its state when the sensor detects an object. DFRobot SEN0531
Expansion board with ToF VL53L4CX distance sensor with a range of up to 6 m. The shield is compatible with STM32 Nucleo boards. STMicroelectronics X-NUCLEO-53L4A2
VL53L0X ToF Laser Range Finder is a laser distance sensor using the ToF (Time of Flight) measurement technique. The module is supplied with 3.3 ... 5 V voltage and can measure up to 2 m. DFRobot SEN0245
ToF distance sensor (Time of flight) with a range of up to 5 m. The module is supplied with the voltage of 3.3 V and communicates via the I2C interface. SparkFun SEN-19036
The GP2Y0A60SZ distance sensor from Sharp offers a wide detection range of 4″ to 60″ (10 cm to 150 cm) and a high update rate of 60 Hz. The distance is indicated by an analog voltage, so only a single analog input is required to interface with the module.
ToF distance sensor (Time of flight) with a range of up to 5 m. The module is supplied with the voltage of 3.3 V and communicates via the I2C interface. SparkFun SEN-19451
Laser distance sensor with a range of 5 cm to 15 m. It has a high accuracy of ± 2 cm and a resolution of 1 mm. DFRobot SEN0524