Category: Main categories

Laser scanner using ToF technology. It takes measurements at 2 to 8 revolutions per second and has a range of up to 8 m. It communicates via a UART interface. Waveshare D200 LiDAR Kit

Programmable micro 2.3kg*cm servo controlled via UART interface. Features a metal gearbox and position and speed feedback. Waveshare SC09 Servo

9.3" display with touch panel. Equipped with HDMI interface for video display and USB Type-C for touchscreen operation. It offers a resolution of 1600x600 pixels. Waveshare 9.3inch 1600x600 LCD (EU)

FPGA starter kit with Intel Stratix 10 SX chip. The module has integrated transceivers that transmit data at speeds up to 28.3 Gb/s, making DE10-Pro fully compatible with version 3.0 of the PCI Express standard. The DE10-Pro offers fast parallel Flash memory and four SO-DIMMs that have 4 GB DDR4 SDRAM. Terasic P0627

A camera module equipped with an OV5693 sensor with a resolution of 5 MP. It uses a USB 2.0 interface, allowing easy connection to a computer or other device that supports this standard. Waveshare OV5693 5MP USB Camera (A)

Development kit with Apollo S10 module and base board. Equipped with an Intel Stratix 10 SoC processor with 2800K logic elements, has a DDR4 SDRAM memory (up to 64 GB), built-in USB-Blaster II, Ethernet, microSD, miniUSB and QSFP connectors and USB type C. TerasIC Apollo Developer Kit (P0671)

Evaluation module with Intel Stratix 10 SoC processor with 2800K logic elements. The module has DDR4 SDRAM memory (up to 64 GB), built-in USB-Blaster II, Ethernet, microSD, miniUSB and expandable FMC/FMC+ connectors. TerasIC Apollo S10 SoM Board (P0630)

Ethernet module with RP2040 microcontroller. It has an embedded CH9120 chip with an integrated TCP/IP protocol stack. The chip can be programmed in C/C++ or MicroPython. Waveshare RP2040-ETH

The EM060K-GL LTE Cat-6 module kit is designed for use with the Raspberry Pi minicomputer. It supports communication over the high-speed LTE-A network and GNSS positioning. Waveshare EM060K-GL LTE Cat-6 HAT

A universal multimeter allows you to measure direct and alternating voltage, direct and alternating current, resistance, capacity and frequency. Equipped with diode tester, circuit continuity test, automatic switch and backlight. Uni-T UT195E

A 10.1" IPS LCD display with touch panel. It is equipped with an HDMI/USB type C interface for video display and USB type C for the touchscreen. It offers a resolution of 1280x800 pixels and has an aluminium casing. Waveshare 10.1HP-CAPLCD Monitor

Oscilloscope with universal meter function. It allows you to measure direct and alternating voltage, direct and alternating current, resistance, capacity and frequency. Equipped with diode tester, circuit continuity test, automatic switch and display backlight and USB interface. Uni-T UT81C

The 7.3", 7-colour ACeP e-Paper display has a resolution of 800x480 px. It has the ability to display images from a microSD card. Framed with a nice wooden border, it can be used as an electronic photo frame. Waveshare PhotoPainter (no BAT)

5W1 soldering station with 800 W power: Hotair, soldering iron, service power supply 0-15V/1A, RF signal tester and voltage meter. The set includes a set of nozzles and a gripper for integrated circuits. YIHUA 853D

A small, high-power motor with a 30:1 metal gear, 12 V operating voltage, 0.06 A to 0.75 A power consumption, 1100 RPM speed, maximum torque of 0.39 kg*cm and carbon brushes with increased durability. Pololu 3038

CS-Mount lens. 8 mm focal length, 50° FoV, manual focus and adjustable aperture. Designed to work with the Raspberry Pi HQ camera. ArduCAM LN039

A small, powerful motor with 5: 1 metal gear, 12 V operating voltage, 0.06 A to 0.75 A power consumption, 6800 RPM, maximum torque of 0.09 kg * cm and carbon brushes for extra durability. Pololu 3036

Lead-free tin Sn99Cu1 with flux, 500 g spool, 0.50 mm diameter

Ethyl alcohol 96%, fully denatured and supplied in a 2L bottle, is a highly effective cleaner and degreaser, ideal for use in electronics due to its fast evaporation and no residue on the cleaned components

C-Mount lens. 16 mm focal length, 24° (H) FoV, manual focus and adjustable aperture. Designed to work with the Raspberry Pi HQ camera. ArduCAM LN046