Category: Main categories
Subcategories
There are 23386 products.
The S9V11MACMA switching step-up/step-down regulator efficiently produces a finely adjustable output between 2.5 V and 9 V whether it is higher or lower than the input voltage, which can range from 3 V to 16 V. The regulator also has a precision-adjustable low-voltage cutoff with hysteresis that can be used to prevent battery over-discharge.
This industrial relay module, powered by the Raspberry Pi RP2350B microcontroller, features six 10A 250VAC/30VDC relays and an isolated RS485 interface. It ensures safe and stable operation thanks to opto-isolation, power isolation, and surge protection. It supports programming in C/C++, MicroPython, and the Arduino IDE, and the 40-pin Pico HAT connector allows for easy expansion. Its robust DIN housing and 7–36V DC power supply make it ideal for industrial automation and IoT projects. Waveshare RP2350-Relay-6CH
IPS 7.9" LCD display with touch panel dedicated for Raspberry Pi. It is equipped with DSI interface for image display and I2C interface for touch screen. Resolution 400x1280 pixels. Waveshare 7.9inch DSI LCD
A compact and powerful IoT prototyping platform based on the dual-core nRF5340 (Arm Cortex-M33) chip, which allows you to run machine learning (ML) models directly on the device. With the nRF Edge Impulse app, users can wirelessly transmit sensor data, train ML models in the cloud, and deploy them back. Support for Bluetooth LE, mesh, Thread, Zigbee, and Matter protocols makes the Thingy:53 ideal for smart home systems. The device is equipped with numerous sensors (temperature, humidity, air quality, light, microphone, accelerometer), a USB-C rechargeable Li-Po battery, and a Grove/Qwiic/Stemma-compatible JST connector, providing great flexibility for prototyping and demonstrations. Nordic Thingy:53
The STN 128×64 display with RA8808 controller and COG technology provides high readability and easy integration with systems based on the KS0108A. Support for the SPI interface and extended temperature range allow its use in mobile, industrial, and outdoor devices.
The STN 128×64 display in negative blue mode with a TOSHIBA T6963C controller enables easy control of graphics and text. Thanks to its extended temperature range and LED backlight, it is suitable for industrial, mobile, and devices operating in variable environmental conditions.
Mechanical mini keyboard with 16 buttons and backlight. Based on the RP2040 chip, it uses Kailh Speed Gold buttons. Pimoroni PIM565
PTFE tube 6×8 mm, 1 m long, is resistant to high temperatures, chemicals, and has a low friction coefficient, making it suitable for guiding filament in 3D printers as well as for use as an insulating element in industrial and laboratory applications.
Module with 9-axis IMU ICM-20948 sensor. The system is an integrated 3-axis accelerometer, gyroscope and magnetometer and a digital motion processor DMP (Digital Motion Processor). Communication via I2C. Pimoroni PIM448
This 13.3-inch industrial HMI module, based on the Raspberry Pi 5 with a Broadcom BCM2712 (Cortex-A76, 2.4GHz) processor, offers 4GB of RAM and a 32GB SD card, providing powerful performance for IoT applications. The device supports 2.4/5GHz Wi-Fi, Bluetooth 5.0, 4Kp60 video output to two displays via HDMI, and is rated for temperatures ranging from -20℃ to 60℃ thanks to its robust housing and fanless design. Edatec ED-HMI3010-133CA-0432
Gravity: Digital LED String Lights (Colorful) consist of a series of colored LEDs. It is powered by a voltage of 2.5 ... 5 V and consists of 40 LEDs placed on a 4-meter cable. DFRobot DFR0439
Base board designed for Raspberry Pi Pico. Equipped with an LCD display, motors controller, buzzer and buttons and a breadboard. Pimoroni PIM550
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores, which operate at a frequency of 133 MHz and 264 kB RAM. The additional ESP8285 system allows communication in the WiFi network. Seeed Studio 102991555
Matrix module of six reflection sensors for the Zumo robot. The module allows you to easily add line detection or edge detection to the robot. Pololu 1419
A set of connectors with a crimper in the cassette. The tool is used for crimping non-insulated connectors AWG 22-18 / 16-14 / 10-8, has the option of cutting wires and removing insulation
A prototype module with a VGA and PS2 connector and a goldpin connector with the pins out of the interfaces. Waveshare VGA PS2 Board
Multifunctional tool for clamping connectors and coaxial connectors RG58, RG6, RG174, has a locking function and the ability to adjust the pressure. HT-301B
Module with dual-core STM32H747XI microcontroller with CortexM7+M4 core equipped with 2 MB flash memory, 1 kB RAM and clock speeds up to 480 MHz. The board has a built-in WiFi module and Bluetooth 5.1. Arduino ABX00046
Segger Arduino MKR adapter (8.06.37) with 6-pin 0.05" and 20-pin JTAG connectors, designed for connecting Segger programmers and debuggers, enables efficient programming and testing of Arduino MKR boards.