.png)
Category: Main categories
Subcategories
There are 23554 products.
Crowtail-Knock Sensor 2.0 is a piezoelectric shock sensor with a digital output, intended for detecting impacts and mechanical vibrations. Designed for simple impulse-detection systems in interactive and alarm projects.
Development board with Allwinner F1C200S processor. It is equipped with 64 MB DDR RAM and 128 MB Nand Flash. It was designed to run under Linux and Python programming. DFRobot DFR0780
Adapter (expansion module) with M.2 connector (A+E Key) and two SATA 3.0 sockets dedicated to LattePanda Delta and Alpha. DFRobot FIT0771
Black and white e-Paper display with a diagonal of 9.7" and a resolution of 1200x825 px. Parallel interface. No PCB. Waveshare 9.7inch e-paper
Black and white e-Paper display with a diagonal of 7.8" and a resolution of 1872x1404 px. Parallel interface. Without PCB. Waveshare 7.8inch e-paper
The meter allows you to measure the temperature in the range from -10 ℃ to 60 ℃ and humidity from 0% RH to 100% RH. It is equipped with an LCD display with backlight, measurement stop function and automatic switch-off. Uni-T UT333
Motor with 25 mm diameter and 52 mm length, 47:1 metal gear, 6 V operating voltage, 0,55 A to 6,5 A power consumption, 200 RPM speed and 8,5 maximum torque. Pololu 1574
Crowtail – 3-Axis Digital Gyro is a gyroscope module with the ITG-3200 chip, offering precise rotational-motion measurement on three axes. Intended for interactive projects, robotics, control systems, and motion-responsive devices.
75:1 Metal Gearmotor 25Dx54L mm HP with 48 CPR Encoder
This development board combines an ATmega32u4 microcontroller with a LoRa RFM95 radio module, enabling long-range, low-power data transfer. It operates in the 868 MHz band, offering a range of up to several kilometers and high interference immunity. Equipped with I2C and USART interfaces, analog and digital ports, a temperature sensor, and a battery level indicator, it is ideal for IoT, telemetry, and remote control projects.
Crowtail-TPL5111 Reset Enable Timer is a module for energy-efficient power control of devices in battery-powered projects. It offers six programmable time intervals and an automatic reset mode, supporting the design of low-power circuits.
Motor with 25 mm diameter and 56 mm length, 172:1 metal gear, 6 V operating voltage, 0,55 A to 6,5 A power consumption, 56 RPM speed and 25 maximum torque. Pololu 1577
Module with e-Paper display, 2.13" diagonal and 212x104 px resolution. Communication via SPI interface. Waveshare 2.13inch e-Paper HAT (B)
Programmable watch with ESP32. Equipped with a touch screen display, power management, RTC clock, vibration motor, loudspeaker and Lithium battery. LiliGo T-WATCH-2020
Extension module with a set of environmental sensors and an LCD display for Raspberry Pi minicomputers. Pimoroni PIM458
A practical adapter for the Raspberry Pi 5 that allows for quick and convenient docking of the CrowView Note. The adapter is plug-and-play, requires no driver installation, and supports Micro HD, Type-C, and USB-A ports. Power is supplied through the Type-C port, ensuring stable operation, while the compact and durable design makes it easy to carry and use on a daily basis. Elecrow Bridge Kit for CrowView Note
Kit with 4.2" e-Paper display with passive power supply via NFC, NFC module and microSD card. Waveshare 4.2inch NFC e-Paper Eval Kit
Module with 5x5 RGB LED matrix display (25 LEDs). It uses the IS31FL3731 driver and communicates via the I2C interface. Pimoroni PIM435