Qwiic Scale - module for strain gauges with ADC NAU7802 converter

4 channel 4.8 KHz 24 bit A/D converter

Module with the driver of the resistive touch panel. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 5423

Extension module with ADC AD7616 converter dedicated to FPGA boards. It offers 32 channels with a resolution of 16 bits and an FMC LPC connector. Numato Lab NLFMCADC002

Module with 4-channel ADC ADS1115 converter. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 1085

High-quality digital-to-analog converter that allows for pure stereo audio playback without the need for I2C configuration or the MCLK pin. It supports I2S signals (BCLK, WSEL, DIN) and audio formats up to 32 bits and 384 kHz, providing an excellent signal-to-noise ratio (112 dB). Audio output is available via a 3.5 mm jack or on-board pads, and the module works best as a line output to amplifiers and audio systems. Adafruit 6250

A module with a stereo DAC converter based on the UDA1334A chip. It can generate a signal with a resolution of 16, 20 or 24 bits. It communicates via the I2S interface. Adafruit 4037

DFRobot DFR0316

DFRobot DFR1184 module with a 15-bit ADS1115 converter enables precise voltage measurements of 0–10 V from industrial sensors. The dual-channel design, support for I2C/UART, and compatibility with popular platforms make it an effective solution for automation systems, environmental monitoring, and energy management.

The Adafruit 5974 module with the HX711 converter enables precise reading of signals from strain gauges and load cells based on a Wheatstone bridge, offering 24-bit resolution and selectable gain. With an integrated screw terminal and options for sampling rate and channel configuration, it is used in projects involving force, pressure, or weight measurement in IoT systems, electronic scales, and mechanical testing.

The sound card in the form of a module with a USB type B socket. It uses the ES9018K2M DAC converter, has a 3.5 mm jack audio output and two RCA connectors

Gravity module designed based on the GP8501 system. It is a two-channel DAC (analog-to-digital) converter with PWM communication that offers an output signal with 8-bit resolution and 0.5% accuracy. It allows you to generate analog signals with a voltage range from 0 to 2.5 V or from 0 to VCC. DFRobot DFR1037

Gravity: I2C ADS1115 The 16-Bit ADC Module is an analogue-to-digital converter module for Arduino and Raspberry Pi. This module uses 16-bit ADC ADS1115 and is powered by 3.3 ... 5V. DFRobot DFR0553

Module with 8 voltage analog outputs with a range from 0 to 10 V. It communicates via the RS485 interface and supports communication within the Modbus RTU protocol. The board is enclosed in a housing that can be mounted on an industrial rail. Waveshare Modbus RTU Analog Output 8CH (B)

Gravity module designed based on the GP8512 system. It is a single-channel DAC (analog-to-digital) converter with I2C communication that offers an output signal with a resolution of 15-bit and an accuracy of 0.01%. It allows you to generate analog signals with a voltage range from 0 to 2.5 V or from 0 to VCC. DFRobot DFR1035

Module with an 8-channel ADC converter with 8-bit resolution. It uses the ADS7830 chip and is equipped with a STEMMA QT connector, thanks to which it communicates via the I2C interface. Adafruit 5836

ADC converter module with 7 measurement channels (measuring 0-5V, 0-10V voltage and 4-20 mA current). Communicates via RS485 industrial interface using Modbus RTU protocol. R4AVA07