micro:IO-BOX - expansion module with Li-Ion power supply for micro:bit
ID: 586404
5906623434190
zł67.45
Tax included
zł54.84 tax excl.
Multifunctional micro:bit expansion module with built-in Li-Ion battery. The board is equipped with a two-channel DC motor driver, 9 IO pins, I2C, UART interface, buzzer, 4 RGB LEDs and a charging circuit. DFRobot MBT0005
Description
Multifunctional micro:bit expansion module with built-in Li-Ion battery. The board is equipped with a two-channel DC motor driver, 9 IO pins, I2C, UART interface, buzzer, 4 RGB LEDs and a charging circuit. The module is powered by a CR123A battery, which provides up to 6 hours of device operation. To ensure the appropriate level of safety, the board is protected against short circuit and reverse connection. Full documentation with examples of use is available on the product Wiki page.
Features
- Battery type: CR123A 3.6V Li-ion battery
- Power switch
- Charging current: 350 mA
- Charging time: 2.5 hours
- Digital output voltage: 0V / 3.3V
- Analog output voltage: 0 to 3.3 V DC
- Built-in buzzer
- Buzzer switch
- Built-in RGB: 4 x WS2812B (P15)
- Two-channel engine controller
- Micro IO outputs: bit (P0, P1, P2, P8, P12, P13, P14, P15, P16)
- I2C interface
- UART interface
- Supply voltage: 4.5 to 5.5 V
- Dimension: 61 x 61 mm
586404
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Expansion board for micro:bit modules with connectors compatible with Boson and Gravity sets. DFRobot DFR0521
zł41.93
24h
Available quantity: 1
Available
Micro:Mate is an expansion board for the micro: bit development module. It provides six 3-pin connectors with I/O outputs, a 3.5mm audio jack connector and is powered from a 5V microUSB connector. DFRobot DFR0518
zł30.90
Delivery date unknown
No product available!
CR123A lithium battery with 3V voltage and 1400mAh capacity. GP CR123A
zł12.90
24h
Available quantity: 5
Available
Educational micro:bit module with 32-bit ARM Cortex-M4 microcontroller. Manufactured to interest the youngest in computer engineering. SparkFun DEV-17287
zł72.90
24h
Available quantity: 17
Available
Starter kit with micro:bit v2. In addition to the micro:bit v2 board, the set includes a microUSB-USB cable, a battery basket and two AAA batteries. SparkFun DEV-17288
zł94.89
Delivery date unknown
No product available!
Other products in the same category (16)
Simple and compact protective case for the micro:bit. Made of transparent acrylic. PRT - 14335
zł28.12
24h
Available quantity: 1
Available
Speaker for micro:bit is an expansion module with a loudspeaker designed for micro:bit with volume control and headphone output. Speaker for micro:bit
zł47.98
24h
Available quantity: 1
Available
SparkFun weather: bit module designed for micro: bit, with temperature, humidity and pressure sensor (BME280 system). In combination with the micro: bit module, it is possible to build a fully functional weather station. SparkFun DEV-15837
zł123.04
24h
Available quantity: 1
Available
Extension module with environmental sensors designed for micro: bit. Can be programmed with MakeCode or Mind+. DFRobot MBT0034
zł566.53
24h
Available quantity: 2
Available
The module with 4 relays, designed to work with the micro:bit. It allows you to control devices with operating parameters up to 120VAC/2A or 24VDC/2A. SB Components 14118
zł84.48
24h
Available quantity: 1
Available
The IO expansion module is designed to work with the micro:bit educational board. There are 20 GPIO pins on the board, a buzzer and a voltage stabilization circuit
zł33.63
24h
Available quantity: 1
Available
1.8inch LCD for micro:bit is an overlay with LCD display. The screen has a resolution of 160x128 pixels. The module has a standard micro: bit interface. 1.8inch LCD for micro: bit
zł82.99
24h
Available quantity: 1
Available
Transparent case made of tinted plastic, designed for micro:bit educational modules. Adafruit 4852
zł16.29
24h
Available quantity: 2
Available
An advanced LED module for the BBC micro:bit, featuring 60 individually addressable ZIP LEDs, plus a MEMS microphone and piezo speaker to create light and sound effects. The module also has an I2C-controlled real-time clock, and its integrated edge connector and AA battery holder means it\'s ready to go as soon as you plug in your micro:bit. Kitronik 5672
zł136.57
24h
Available quantity: 3
Available
Kitronik 5643, known as LAMP:bit, is a module designed for the BBC micro:bit that replicates the function of a streetlight. It features a white LED and a phototransistor, allowing for the simulation of automatic lighting activation at dusk. This module is an excellent educational tool for learning the basics of programming and understanding how urban lighting systems operate.
zł29.77
24h
Available quantity: 10
Available
Multifunctional expansion module dedicated to micro: bit V2. DFRobot MBT0042
zł206.03
24h
Available quantity: 1
Available
Qwiic adapter designed for micro:bit educational modules. Facilitates access to all pins that are led out on the connector with a pitch of 2.54 mm and the Qwiic connector. SparkFun BOB-16446
zł35.46
24h
Available quantity: 1
Available
The expansion module is designed to work with micro:bit. It allows you to control 4 DC motors or two stepper motors and 8 servos. It communicates via the I2C interface. DFRobot DFR0548
zł84.92
24h
Available quantity: 2
Available
Module with 17x7 LED matrix display (119 LEDs) designed to work with micro:bit. It uses the IS31FL3731 driver and communicates via the I2C interface. Pimoroni PIM353
zł88.29
24h
Available quantity: 2
Available
Qwiic adapter designed for micro:bit educational modules. Facilitates access to all pins that are led out on the connector with a pitch of 2.54 mm and the Qwiic connector. SparkFun BOB-16445
zł35.29
24h
Available quantity: 1
Available
The expansion module is designed for micro:bit v2. It is equipped with connectors to which you can attach modules compatible with the Grove standard. Seeed Studio 103100063
zł58.30
24h
Available quantity: 1
Available
Multifunctional micro:bit expansion module with built-in Li-Ion battery. The board is equipped with a two-channel DC motor driver, 9 IO pins, I2C, UART interface, buzzer, 4 RGB LEDs and a charging circuit. DFRobot MBT0005