STM32H7 Trace Reference Board (6.68.20)
ID: 1189773
zł1,036.19
Tax included
zł842.43 tax excl.
A compact reference platform that enables rapid testing and verification of trace configurations, providing excellent signal quality for analysis. With the ST STM32H743 microcontroller and support for JTAG, SWD and SWO debugging interfaces, the board provides high performance and flexibility in monitoring system performance. Segger STM32H7 Trace Reference Board (6.68.20)
Description
Trace Reference Board is a compact reference platform designed for quick and easy testing and verification of trace configurations. This board is the ideal solution for embedded systems engineers who need a tool for quickly checking the quality of trace signals, including in mobile and demonstration applications. Thanks to its optimized design, it provides excellent signal quality, allowing for precise analysis with an oscilloscope or other measurement devices.
The set is equipped with a microcontroller ST STM32H743, running at 400 MHz, ensuring high performance when working with data, enabling a throughput of 1064 Mbps with a 4-bit interface. The port operates at 266 MHz, ensuring precise data transfer. Supported debugging interfaces include JTAG, SWD, and SWO, which provide flexible and effective system monitoring.
The board is designed to easily adapt to various target systems, ensuring full compatibility with a range of devices. For example, the Trace Reference Board can be powered directly by the J-Trace PRO device, eliminating the need for additional power cables. This allows trace system testing to be performed quickly and smoothly. The board also features three LEDs, which can be used to visualize different system states during testing, making device monitoring easier. Additionally, the availability of test points enables quick trace signal analysis using measurement tools.
Features
- Microcontroller: ST STM32H743
- Clock speed: 400 MHz
- Throughput: 1064 Mbps (4-bit Trace)
- Port frequency: 266 MHz
- Debugging interfaces: JTAG / SWD / SWO
- Ideal for quick configurations
- Compact size
- Supports various target systems
- Powered directly from J-Trace PRO
- LEDs: 3 programmable LEDs for demonstration purposes
- Test points: All trace signals available for measurement
- Dimensions: 114.3 x 127 x 12.7 mm
1189773
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
J-Trace PRO for Cortex-M is setting a new standard for trace probes. It enables continuous streaming trace via its Gigabit Ethernet interface, lifting the limitations by internal buffers and slow data transmission. (j-trace-pro)
zł7,781.41
24h
Available quantity: 1
Available
Other products in the same category (16)
The RX FINE adapter converts a standard 20-pin 2.54 mm connector to a 14-pin 2.54 mm connector. It enables the connection of Segger programmers with RX devices from Renesas. Segger RX Fine Adapter (8.06.10)
zł260.56
1 weeks
No product available!
J-Link ARM-14 Adapter, RoHS
zł354.39
24h
Available quantity: 1
Available
Xilinx adapter that connects to Xilinx\'s 14-pin, 2mm JTAG connector, providing debugging of MCU cores such as the Arm Cortex-A9 on Xilinx Zynq FPGAs. With its compact design and high signal quality, it is a reliable tool for engineers working with FPGA platforms. Segger Xilinx Adapter (06/08/19)
zł256.43
1 weeks
No product available!
An adapter that converts a standard 20-pin 2.54 mm connector to a 10-pin 2.54 mm connector. It enables the connection of Segger programmers with Silicon Labs devices and development boards with a C2 interface. Segger SiLabs C2 Adapter (8.06.17)
zł361.60
1 weeks
No product available!
Compact evaluation board for testing NOR and NAND flash memory supported by emFile drivers. Enables fast and reliable flash programming with SEGGER tools, offering support for various packages such as SO-8, SO-16, BGA and SON. SEGGER (Q)SPI Flash Evaluator (6.40.00)
zł1,036.19
1 weeks
No product available!
A 1:1 adapter that allows you to connect a standard 20-pin connector to its 2mm pitch counterpart without any additional configuration. For some models, such as the J-Link PRO, pins 14, 16, 18 and 20 may not be connected to ground, so it is recommended to leave them unconnected on the target hardware. Segger 2mm Adapter (06/08/11)
zł256.43
1 weeks
No product available!
SiFive-ARTY adapter for debugging between J-Link and the ARTY board with SiFive RISC-V. Segger SiFive-ARTY Adapter (8.06.24)
zł260.56
1 weeks
No product available!
The Intel FPGA Adapter (formerly J-Link Altera Adapter) connects to the Intel FPGA 10-pin JTAG connector, enabling debugging of FPGA-based MCU cores such as the dual-core Arm Cortex-A9 in Cyclone V devices. on Intel FPGA solutions.
zł254.71
1 weeks
No product available!
Standard 20-pin 0.1 male connector to provide electrical isolation, Segger
zł1,031.90
24h
Available quantity: 1
Available
A specialized demonstration board designed to support Tail Tagging within the embOS/IP IP stack. Using this technology, it is possible to transform a single Ethernet port into several logical ports, enabling the creation of a virtual multiport network using only a single Ethernet port. Segger embOS/IP Switch Board (6.70.00)
zł512.87
1 weeks
No product available!
The Segger J-Link Measurement+Patch Adapter allows you to easily customize connections between J-Link or Flasher devices and boards that do not have a standard debug connector. It is equipped with colored wires for signal identification, test points and jumpers for adjusting the voltages on the pins.
zł521.14
1 weeks
No product available!
Standard 20-pin 0.1 male connector to provide electrical isolation, Segger
zł1,031.90
24h
Available quantity: 3
Available
10-pin Needle Adapter to connect Flasher 5, Flasher ST7 or Flasher STM8 to a PCB, Segger
zł521.14
1 weeks
No product available!
Adapter that enables JTAG connection between devices such as J-Link, J-Trace or Flasher and Jacinto7 systems from TI, offering access to JTAG/SWD and Trace connectors with TPIU tracking function. Thanks to high quality of workmanship and versatility, the adapter provides a stable connection, supporting debugging, testing and diagnostic processes in embedded systems. Segger MIPI-60 Adapter (8.06.42)
zł512.87
1 weeks
No product available!
An adapter to connect the JTAG to a target hardware system that has an automotive connector. It has a 20 pin 2.54mm JTAG connector and a 19 pin 1.27mm Samtec FTSH connector. Segger Infineon AUTO-20 Adapter (8.06.33)
zł260.56
1 weeks
No product available!
Segger adapter 8.06.28 allows conversion from a 20-pin 0.1" connector to a 10-pin 0.05" Cortex-M type connector with the option of custom pin mapping. A useful solution for integrating programmers and debuggers with devices featuring different pin configurations.
zł254.71
24h
Available quantity: 1
Available
A compact reference platform that enables rapid testing and verification of trace configurations, providing excellent signal quality for analysis. With the ST STM32H743 microcontroller and support for JTAG, SWD and SWO debugging interfaces, the board provides high performance and flexibility in monitoring system performance. Segger STM32H7 Trace Reference Board (6.68.20)