Crowtail – HTU21D Humidity & Temperature Sensor 2.0 – humidity and temperature sensor with I2C interface, 5 V
ID: 1201692
5902186331983
zł18.19
Tax included
zł14.79 tax excl.
Crowtail – HTU21D Humidity & Temperature Sensor 2.0 enables accurate temperature and humidity measurement using the digital I2C interface. It is suitable for environmental monitoring projects, automation systems, and weather stations.
Description
The Crowtail – HTU21D Humidity & Temperature Sensor 2.0 module enables precise measurement of relative humidity and ambient temperature in the ranges of 0–100% RH and –40°C to 105°C, respectively. The HTU21D sensor communicates via the I2C interface and provides calibrated data in digital form. Thanks to its high accuracy (±2% RH), low thermal and humidity inertia, and very low power consumption (max. 2.7 µW), the module is used in environmental monitoring systems, weather stations, data loggers, and humidity control systems. The built-in voltage regulator allows direct powering from 5 V systems, such as Crowduino.
Properties
- Supply voltage range: 5 V
- Humidity measurement range: 0–100% RH
- Temperature measurement range: –40°C to 105°C
- Humidity measurement accuracy: ±2% RH (in the range 10–95% RH)
- Humidity hysteresis: ±1% RH
- Response time: 5 s
- Annual drift: –0.5% RH / year
- Measurement time: 50 ms
- Maximum power consumption: 2.7 µW
- Communication interface: I2C
- Dimensions: 20.0 × 20.0 × 9.8 mm
Included
- Crowtail – HTU21D Humidity & Temperature Sensor 2.0 module x1
- Crowtail 4-pin cable x1
1201692
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
Temperature and humidity sensor module based on the HTS221 chip. Equipped with a STEMMA QT connector, it communicates via an I2C or SPI interface. Adafruit 4535
zł57.90
24h
Available quantity: 2
Available
Module with a pressure, temperature and humidity sensor based on the MS8607. Equipped with a STEMMA QT connector, it communicates via the I2C. Adafruit 4716
zł73.57
24h
Available quantity: 1
Available
Module with a digital temperature and humidity sensor based on the SHTC3 system. Communication takes place via the I2C interface. DFRobot SEN0414
zł23.80
24h
Available quantity: 4
Available
Module with DHT20 temperature and humidity sensor. It allows you to measure humidity in the range from 0 to 100% and temperature from -40 to 80℃. DFRobot SEN0497
zł33.59
24h
Available quantity: 3
Available
Module with a temperature and humidity sensor based on the SHT40 system. It communicates via the I2C interface. SEN0428
zł36.70
24h
Available quantity: 2
Available
Module with environmental sensors for Raspberry Pi Pico. It allows you to measure temperature, humidity, air quality pressure and color detection. SB Components 22366
zł208.80
24h
Available quantity: 3
Available
Multi-functional environmental sensor consisting of SHTC3 temperature and humidity sensor, BMP280 pressure sensor, VEML7700 ambient light sensor and ML8511 UV sensor. DFRobot SEN0500
zł123.16
24h
Available quantity: 1
Available
Module with CO2, temperature and humidity sensor SCD-41. Equipped with a Qwiic/STEMMA QT connector, it communicates via the I2C interface. Pimoroni PIM587
zł400.32
24h
Available quantity: 1
Available
Module with temperature and humidity sensor TH02. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020074
zł64.23
24h
Available quantity: 3
Available
Module with DHT20 sensor. It allows you to measure humidity in the range from 0 to 100% and temperature from -40 to 80 ℃. Seeed Studio 101020932
zł41.22
24h
Available quantity: 1
Available
Module with BME280 environmental sensor. It allows you to measure temperature, humidity and pressure. The sensor is equipped with two communication interfaces: SPI and I2C. SparkFun SEN-13905
zł112.74
24h
Available quantity: 2
Available
Module with DHT11 temperature and humidity sensor designed for Wemos D1 Mini
zł7.74
24h
Available quantity: 9
Available
Module with SHT30 temperature and humidity sensor designed for Wemos D1 Mini
zł16.25
4 weeks
No product available!
Module with pressure, temperature and humidity sensor BME280. It allows to read the atmospheric pressure in the range from 300 to 1100 hPa and communicates via the I2C or SPI interface. Waveshare BME280 Environmental Sensor
zł42.12
24h
Available quantity: 12
Available
A module with a temperature and humidity sensor based on the AHT20 system. It communicates via the I2C interface. DFRobot SEN0527
zł22.84
24h
Available quantity: 2
Available
A module with a temperature and humidity sensor based on the AHT20 system. Equipped with a Gravity connector, it communicates via the I2C interface. DFRobot SEN0528
zł22.30
24h
Available quantity: 6
Available
Crowtail – HTU21D Humidity & Temperature Sensor 2.0 enables accurate temperature and humidity measurement using the digital I2C interface. It is suitable for environmental monitoring projects, automation systems, and weather stations.