LCD-AG-TP-TFT5i6 PBF

FFC tape enabling seamless connection of DSI displays with the Raspberry Pi 5 minicomputer. Black EMI shielding foil on both sides of the tape increases anti-interference efficiency, protecting signals against interference from the environment. Waveshare Pi5-Display-Cable-500mm

TFT LCD driver with DPI interface dedicated to Raspberry Pi. It allows you to operate resistive touch panels. Adafruit 2453

HDMI mini cable (male) to VGA (female). It allows you to connect displays with VGA support on a mini HDMI connector to the VGA output. Waveshare Mini HDMI Male to VGA Female Cable

A small magnet designed for mounting RGB matrix displays. It fits perfectly into the holes in the panels

Module with I2C driver based on the HT16K33 system. It is equipped with STEMMA QT connectors and is dedicated to 8x8 LED matrix displays with a diagonal of 1.2". Adafruit 1048

Touchpanel for 128x64 A-series displays, 81.8x52.2mm, 2.54 mm IDC connector

The expansion module (shield) is designed for Arduino boards. It enables easy connection of 16x32 and 32x32 matrix displays. Requires self-assembly. Adafruit 2601

Plastic semi-circular lens with an outer diameter of 40 mm. Adafruit 3853

Driver enabling operation of displays with an RGB-666 connector with resolutions from 480x272 to 800x600 pixels. Equipped with an ESP32-S3 microcontroller with 16 MB Flash memory and 8 MB PSRAM memory. Powered and programmable via USB Type-C connector. Adafruit 5800

The expansion module (shield) is designed for Teensy 4.0 and Teensy 4.1 boards. It allows you to easily connect displays from the SmartMatrix series. Adafruit 4828

The driver with the TPIC6C596 system allows you to control 7-segment displays using three signal lines. Serial connection of controllers is possible. SparkFun WIG-13279

The driver for e-Paper displays with a built-in ESP32 module that provides communication via WiFi and Bluetooth. The board allows you to display images on e-Paper displays from a computer or smartphone. Waveshare e-Paper ESP32 Driver Board

7" Capacitive Touch Panel Overlay for LattePanda V1.0 IPS Display

The expansion module (shield) is designed for Feather nRF52840 boards. It enables easy connection of 16x32, 32x32 and 64x32 matrix displays. Requires self-assembly. Adafruit 4702

Driver for e-Paper displays in the form of an overlay for Arduino and Nucleo. The SPI interface is used for communication with the controller. Waveshare e-Paper Shield

FFC tape enabling seamless connection of DSI displays with the Raspberry Pi 5 minicomputer. Black EMI shielding foil on both sides of the tape increases anti-interference efficiency, protecting signals against interference from the environment. Waveshare Pi5-Display-Cable-200mm