zł744.50 tax excl.
A compact and powerful FPGA platform based on the Altera Agilex 3 A3CZ135BB18AE7S chip, offering 135,110 logic elements and M20K and MLAB memory for advanced digital designs. The board features 64 MB of SDRAM, a MicroSD slot, HDMI output, a Gigabit Ethernet port, and a built-in USB-Blaster III programmer with USB-C for rapid prototyping and debugging. With extensive I/O, including GPIOs, LEDs, switches, and PMOD connectors, the Atum A3 Nano is ideal for robotics, consumer electronics, and image processing applications. The platform is ready to run after connecting a 5V power supply, and a free Altera Quartus Pro Edition software license is included.
The Terasic Atum A3 Nano kit is a compact and powerful FPGA platform that combines high computational power with an affordable price. Powered by the Altera Agilex 3 A3CZ135BB18AE7S, it offers 135,110 logic elements, 6.89 Mbit M20K memory, and 1.4 Mbit MLAB, enabling the implementation of complex digital projects. The board is equipped with 64 MB SDRAM, a MicroSD card slot, HDMI output, Gigabit Ethernet port, and an integrated USB-Blaster III programmer/debugger with a USB Type-C connector. Its small form factor makes it ideal for applications requiring compact solutions, such as robotics, automotive, smart cities, consumer electronics, and image processing.

The Atum A3 Nano offers extensive I/O capabilities, including 4 LEDs, 2 slide switches, 2 buttons, a 2x20 GPIO header, and two 2x6 TMD connectors compatible with PMOD. The platform supports both prototyping and advanced FPGA applications, allowing rapid testing and expansion of projects. The kit also includes a free license for Altera Quartus Pro Edition, enabling immediate FPGA digital design. The board is fully prepared for 5V DC power and ready to use straight out of the box.

The compact design, high performance, and broad set of interfaces make the Atum A3 Nano an excellent tool for students, engineers, and professional digital system designers. With the ability to integrate with various peripheral modules and standard PMOD connectors, the kit provides full flexibility for creating advanced electronic and FPGA projects.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Patchcord UTP 5E Ethernet cable with a length of 2 m - red, with 2xRJ45 connectors
No product available!
Patchcord UTP 5E Ethernet cable with a length of 2 m - black, with 2xRJ45 connectors
No product available!
Patchcord UTP 5E Ethernet cable with a length of 2 m - blue, with 2xRJ45 connectors
No product available!
Patchcord UTP 5E Ethernet cable with a length of 2 m - yellow, with 2xRJ45 connectors
No product available!
HDMI cable compliant with the HDMI High Speed with Ethernet specification, allows you transmit a 4k resolution image at 30 Hz, 0.5m cable length. LANBERG
HDMI cable compliant with the HDMI High Speed with Ethernet specification, allows you transmit a 4k resolution image at 30 Hz, 1m cable length. LANBERG
HDMI cable compliant with the HDMI High Speed with Ethernet specification, allows you transmit a 4k resolution image at 30 Hz, 1,8m cable length. LANBERG z27510
HDMI cable compliant with the HDMI High Speed with Ethernet specification, allows you transmit a 4k resolution image at 30 Hz, 3 m cable length. LANBERG
Compact FPGA kit with Intel Arria 10 GX chip equipped with 8 GB DDR4-2133 memory and Thunderbolt 3 communication connector. Can be used directly on laptops or other portable devices. Terasic FLIK P0642
No product available!
CoreEP4CE10 is a bootable board with the FPGA EP4CE10F17C8N chip from the Altera Cyclone IV family. Waveshare CoreEP4CE10
No product available!
Evaluation module with Intel Stratix 10 SoC processor with 2800K logic elements. The module has DDR4 SDRAM memory (up to 64 GB), built-in USB-Blaster II, Ethernet, microSD, miniUSB and expandable FMC/FMC+ connectors. TerasIC Apollo S10 SoM Board (P0630)
No product available!
The robust hardware design platform built around the Altera System-on-Chip (SoC) FPGA, which combines the latest dual-core Cortex-A9 embedded cores with industry-leading programmable logic for ultimate design flexibility. Users can now leverage the power of tremendous re-configurability paired with a high-performance, low-power processor system.
VEEK-MT2S is a development board based on the Cyclone V SX SoC Cyclone V SX SoC-5CSXFC6D6F31C6N chip. Included in addition to the board with programmable FPGA, there are also a 7-inch TFT touchscreen with a resolution of 800 x 480 pixels, 8 megapixel camera (3264 x 2448 pixels), light sensor IMU 9DOF sensor (accelerometer, gyroscope, magnetometer) . Terasic K0161
No product available!
Development kit with Altera MAX10 (10M50DA) FPGA chip with built-in Flash memory and IO interface expansion connectors. Numato Lab NLFA1002B
No product available!
[EDUCATIONAL PRICE] Terasic DE0 Board evaluation kit for Altera Cyclone III FPGA devices. It is equipped with all basic peripherals enabling research and evaluation work with FPGAs, including a JTAG programmer-configurator. The reduced price (compared to the standard Terasic DE0 version) applies exclusively to schools, universities, lecturers, pupils, and students.
The TerasIC AHA-HSMC card enables the integration of Aptina image sensors with TerasIC FPGA kits equipped with an HSMC interface. It provides full support for communication, data transmission, and shutter control, making it a key component in vision systems and real-time image processing projects.
No product available!
The DE10-Standard Development Kit presents a robust hardware design platform built around the Intel System-on-Chip (SoC) FPGA, which combines the latest dual-core Cortex-A9 embedded cores with industry-leading programmable logic for ultimate design flexibility. P0493
Evaluation board with the Intel Agilex SoC system with 1400 thousand. logical elements. The module has two DDR4 SO-DIMM memory slots (up to 32 GB), QSFP28 connector, PCIe Gen 4x16, built-in USB-Blaster II and FMC/FMC+ connectors for expansion. TerasIC Apollo Agilex SOM (P0714)
No product available!
FPGA starter kit equipped with Cyclone V GT with 301K LE and supports PCIe Gen 2x4. The board has 1 GB DDR3 memory, 64 MB SDRAM memory, UART-USB interface and extensions such as GPIO and Arduino. Terasic P0559
No product available!
FPGA starter kit with Intel Stratix 10 SX chip. The module has integrated transceivers that transmit data at speeds up to 28.3 Gb/s, making DE10-Pro fully compatible with version 3.0 of the PCI Express standard. The DE10-Pro offers fast parallel Flash memory and four SO-DIMMs that have 4 GB DDR4 SDRAM. Terasic P0627
No product available!
The ADC-SoC is a SoC FPGA motherboard with dual-channel high-speed ADC
No product available!
A set of elements designed for evaluation sets with programmable circuits of the Cyclone V SoC FPGA family, which includes; 7-inch TFT display with touch support (5-points), 8 megapixel camera with autofocus and sensors (light, accelerometer, gyroscope, magnetometer). Terasic P0494
No product available!
Terasic DE10-Lite is a cost-effective Altera MAX 10 based FPGA board. Kit contains lots of reference designs and software utilities for users to easily develop their applications based on these design resources
Development platform based on Intel MAX 10 FPGA. The system provides the user with 50,000 logical elements and 1638 kbits M9K and 5888 kbits Flash. The board contains components such as built-in USB-Blaster II, QSPI Flash, ADC connector, WS2812B RGB LED and 2x6 TMD connector. Academic version. TerasiC T-Core P0633
A compact and powerful FPGA platform based on the Altera Agilex 3 A3CZ135BB18AE7S chip, offering 135,110 logic elements and M20K and MLAB memory for advanced digital designs. The board features 64 MB of SDRAM, a MicroSD slot, HDMI output, a Gigabit Ethernet port, and a built-in USB-Blaster III programmer with USB-C for rapid prototyping and debugging. With extensive I/O, including GPIOs, LEDs, switches, and PMOD connectors, the Atum A3 Nano is ideal for robotics, consumer electronics, and image processing applications. The platform is ready to run after connecting a 5V power supply, and a free Altera Quartus Pro Edition software license is included.