Core2350B module with RP2350B microcontroller designed by Raspberry Pi intended for embedded applications and integration with carrier boards. Compact dimensions of 25.40 x 25.40 mm and 2.54 mm pin pitch enable use in prototyping, control systems and target devices.
The system uses dual-core and dual-architecture design, enabling operation with ARM Cortex-M33 cores or Hazard3 RISC-V cores up to 150 MHz. The board includes 16 MB Flash, 520 kB SRAM and 8 MB PSRAM. The module provides 48 multifunction GPIO pins and communication interfaces suitable for IoT systems, data processing and control applications.
The FPC 6PIN connector enables USB interface connection via adapter (not included). Low-power modes allow use in battery-powered devices. Programming is performed via USB using mass storage mechanism.


Data sheet
Manufacturer
Responsible person
Module with RP2350B microcontroller, clock speed up to 150 MHz, 2 MB PSRAM, 16 MB Flash, 48 GPIO, 2.54 mm pitch, includes USB adapter and FPC cable, dimensions 25.40 x 25.40 mm. Waveshare Core2350B1-Kit
Module with RP2350B microcontroller, clock speed up to 150 MHz, 0 MB PSRAM, 16 MB Flash, 48 GPIO, 2.54 mm pitch, includes USB adapter and FPC cable, dimensions 25.40 x 25.40 mm. Waveshare Core2350B0-Kit
Module with RP2350B microcontroller, clock speed up to 150 MHz, 0 MB PSRAM, 16 MB Flash, 48 GPIO, 2.54 mm pitch, compact size 25.40 x 25.40 mm. Waveshare Core2350B0
Module with RP2350B microcontroller, clock speed up to 150 MHz, 0 MB PSRAM, 16 MB Flash, 48 GPIO, 2.54 mm pitch, includes USB adapter and FPC cable, dimensions 25.40 x 25.40 mm. Waveshare Core2350B0-Kit
Module with RP2350B microcontroller, clock speed up to 150 MHz, 0 MB PSRAM, 16 MB Flash, 48 GPIO, 2.54 mm pitch, compact size 25.40 x 25.40 mm. Waveshare Core2350B0
Development board with RP2350B microcontroller, 2.41" AMOLED touch display, 450 x 600 px resolution, QSPI interface, 6-axis sensor, RTC, TF card slot and Li-ion battery connector, version with protective case. Waveshare RP2350-Touch-AMOLED-2.41-B
No product available!
Development board with RP2350B microcontroller, 2.41" AMOLED touch display, 450 x 600 px resolution, QSPI interface, 6-axis sensor, RTC, TF card slot and Li-ion battery connector, version without protective case. Waveshare RP2350-Touch-AMOLED-2.41
No product available!
Development board with RP2350B microcontroller, equipped with a 3.5" IPS display with 320 x 480 px resolution, capacitive touch panel, camera interface, audio codec, IMU sensor, microSD slot and USB Type-C, enclosed with OV5640 camera. Waveshare RP2350-Touch-LCD-3.5-C
No product available!
Development board with RP2350B microcontroller, equipped with a 3.5" IPS display with 320 x 480 px resolution, capacitive touch panel, camera interface, audio codec, IMU sensor, microSD slot and USB Type-C. Waveshare RP2350-Touch-LCD-3.5
No product available!
Development board with RP2350A microcontroller, 1.54" IPS touch LCD 240 x 240 px, USB-C interface, IMU module, microSD slot and 3.7 V battery included. Waveshare 34333
Development board with RP2350A microcontroller, 1.54" IPS touch LCD 240 x 240 px, USB-C interface, IMU module, microSD slot. No 3.7 V battery included. Waveshare 34332
Development board with RP2350A microcontroller, 1.54" IPS LCD 240 x 240 px, USB-C interface, IMU module and microSD slot. No 3.7 V battery included. Waveshare 34334
Development board with RP2350A microcontroller, 1.54" IPS LCD 240 x 240 px, USB-C interface, IMU module, microSD slot and 3.7 V battery included. Waveshare 34335
Development board based on the RP2040 microcontroller combines a dual-core Arm Cortex-M0+ processor with the W6300 Ethernet controller featuring a hardware TCP/IP stack and native IPv4/IPv6 support. The board maintains compatibility with Raspberry Pi Pico while adding a 10/100 Mb/s Ethernet interface with an RJ45 connector and optional Power over Ethernet support using the WIZPoE-P1 module. It is designed for IoT applications, industrial automation, network communication systems, and embedded devices requiring reliable wired Ethernet connectivity. WIZnet W6300-EVB-Pico
Development board based on the RP2350 microcontroller combines a dual-core Arm Cortex-M33 processor with the W6100 Ethernet controller featuring a hardware TCP/IP stack and native IPv4/IPv6 support. The board maintains compatibility with Raspberry Pi Pico 2 while adding a 10/100 Mb/s Ethernet interface with an RJ45 connector and optional Power over Ethernet support using the WIZPoE-P1 module. It is designed for IoT applications, industrial automation, network communication systems, and embedded devices requiring reliable wired Ethernet connectivity. WIZnet W6100-EVB-Pico2
Development board based on the RP2350 microcontroller combines a dual-core Arm Cortex-M33 processor with the W5500 Ethernet controller featuring a hardware TCP/IP stack. The board maintains compatibility with Raspberry Pi Pico 2 while adding a 10/100 Mb/s Ethernet interface with an RJ45 connector and optional Power over Ethernet support using the WIZPoE-P1 module. It is designed for IoT applications, industrial automation, network communication systems, and embedded devices requiring reliable wired Ethernet connectivity. WIZnet W5500-EVB-Pico2
No product available!
Development board based on the RP2350 microcontroller combines a dual-core Arm Cortex-M33 processor with the W5100S Ethernet controller featuring a hardware TCP/IP stack. The board maintains compatibility with Raspberry Pi Pico 2 while adding a 10/100 Mb/s Ethernet interface with an RJ45 connector and optional Power over Ethernet support using the WIZPoE-P1 module. It is designed for IoT applications, industrial automation, network communication systems, and embedded devices requiring reliable wired Ethernet connectivity. WIZnet W5100S-EVB-Pico2
Development board based on the RP2350 microcontroller combines a dual-core Arm Cortex-M33 processor with the W6300 Ethernet controller featuring a hardware TCP/IP stack and native IPv4/IPv6 support. The board maintains compatibility with Raspberry Pi Pico 2 while adding a 10/100 Mb/s Ethernet interface with an RJ45 connector and optional Power over Ethernet support using the WIZPoE-P1 module. It is designed for IoT applications, industrial automation, network communication systems, and embedded devices requiring reliable wired Ethernet connectivity. WIZnet W6300-EVB-Pico2
No product available!
Development board based on the W55RP20 microcontroller combines a dual-core RP2040 processor with the W5500 hardware Ethernet controller featuring a built-in TCP/IP stack. The board maintains Raspberry Pi Pico compatibility while adding a 10/100 Mb/s Ethernet interface with an RJ45 connector and optional Power over Ethernet capability using the WIZPoE-P1 module. The board is intended for IoT applications, industrial automation, network communication systems, and embedded devices requiring reliable wired Ethernet connectivity. WIZnet W55RP20-EVB-Pico
Module with RP2350B microcontroller, up to 150 MHz, 8 MB PSRAM, 16 MB Flash, 48 GPIO, 2.54 mm pitch, compact size 25.40 x 25.40 mm. Waveshare Core2350B2