- New
RP2350A LCD IPS touch 1.54" 240x240 + battery - Waveshare 34333
ID: 1205078
zł80.77
Tax included
zł65.67 tax excl.
Development board with RP2350A microcontroller, 1.54" IPS touch LCD 240 x 240 px, USB-C interface, IMU module, microSD slot and 3.7 V battery included. Waveshare 34333
Description
Development board based on the RP2350A microcontroller featuring a dual-core and dual-architecture design with selectable ARM Cortex-M33 or Hazard3 RISC-V cores. The system operates at up to 150 MHz and provides 512 kB SRAM and 16 MB Flash memory, enabling implementation of advanced embedded systems, IoT devices and user interface applications.
The board integrates a 1.54" IPS display with 240 x 240 px resolution and 65K colors, controlled via SPI interface. The display is equipped with a capacitive touch panel, enabling implementation of touch-based user interfaces.
The design also includes a 6-axis IMU module (accelerometer and gyroscope), TF card slot, audio codec and amplifier, allowing development of multimedia devices and data logging systems. The MX1.25 connector supports a 3.7 V Li-Ion battery (included) with charging and power management, enabling standalone operation.
Programming is performed via USB Type-C port with USB 1.1 support (device and host), including drag-and-drop mass storage mode. The platform supports C/C++, MicroPython and Arduino environments, simplifying integration with existing projects.
- RP2350A - Dual-core and dual-architecture design, up to 150 MHz operating frequency
- 16MB NOR-Flash
- Microphone
- TF card slot
- MX1.25 Lithium Batt header - for 3.7V Lithium Batt, supports charging and discharging, up to 300mA peak charging current
- Batt recharge and discharge management chip
- QMI8658 - 6-axis IMU includes a 3-axis gyroscope and a 3-axis accelerometer
- USB Type-C port - for downloading programs, USB 1.1 with device and host support
- ES8311 - low power audio codec chip
- MX1.25 speaker header
- NS4150B - audio power amplifier chip
- Volume control button - short press to increase volume, long press to decrease volume, programmable for other functions
- PWR button
- BOOT button
Features
- Microcontroller: RP2350A (Raspberry Pi)
- Architecture: Dual-core ARM Cortex-M33 or Hazard3 RISC-V
- Clock frequency: Up to 150 MHz
- SRAM: 512 kB
- Flash memory: 16 MB
- Display: 1.54" IPS touch
- Resolution: 240 x 240 px
- Colors: 65K
- LCD driver: ST7789
- Display interface: SPI (4-wire)
- Touch controller: CST816
- Touch type: Capacitive
- USB interface: USB Type-C, USB 1.1 (device/host)
- Communication interfaces: I2C x1, UART x1
- ADC: 2 channels 12-bit
- PWM: 2 channels
- GPIO: 4 multifunctional pins
- PIO: 12 programmable state machines
- IMU: QMI8658 (3-axis accelerometer + 3-axis gyroscope)
- Audio codec: ES8311
- Audio amplifier: NS4150B
- Memory card slot: TF (microSD)
- Battery connector: MX1.25 3.7 V Li-Ion
- Power management: Battery charge and discharge support, charging current up to 300 mA
- Temperature sensor: Built into microcontroller
- Supported languages: C/C++, MicroPython, Arduino
- Active display area: 27.72 x 27.72 mm
- Dimensions: 46 x 46 x 22.5 mm
- Weight: 0.063 kg
Kit includes
- RP2350-Touch-LCD-1.54 development board
- 3.7 V Li-Ion battery
- PC insulating sheet
1205078
Data sheet
- Microcontroller
- RP2350A
- Flash memory
- 16 MB
- Number of I/O
- 04
- Ethernet
- none
- WiFi/BT module
- No
- Bluetooth module
- No
- MicroSD slot
- Yes
- Length
- 46mm
- Width
- 46mm
- USB connector type
- USB type C
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Development board with RP2350A microcontroller, 1.54" IPS touch LCD 240 x 240 px, USB-C interface, IMU module, microSD slot. No 3.7 V battery included. Waveshare 34332
zł74.98
Delivery date unknown
No product available!
Development board with RP2350A microcontroller, 1.54" IPS LCD 240 x 240 px, USB-C interface, IMU module and microSD slot. No 3.7 V battery included. Waveshare 34334
zł59.59
Delivery date unknown
No product available!
Development board with RP2350A microcontroller, 1.54" IPS LCD 240 x 240 px, USB-C interface, IMU module, microSD slot and 3.7 V battery included. Waveshare 34335
zł65.37
Delivery date unknown
No product available!
Other products in the same category (16)
RP2350 1.75" 466×466 with 65K color AMOLED display and capacitive touch panel, equipped with the RP2350A dual-core, dual-architecture microcontroller, 6-axis IMU sensor, RTC, audio codec with microphone, and integrated LC76G GPS module. The board provides SPI, I2C, UART, ADC, PWM, and USB Type-C interfaces, and includes a ceramic GNSS antenna in the set, enabling the development of portable HMI devices and embedded systems with positioning functionality. Waveshare RP2350-Touch-AMOLED-1.75-G
zł184.16
6 weeks
No product available!
RP2350 1.75" 466×466 with 65K color AMOLED display and capacitive touch panel, equipped with the RP2350A dual-core, dual-architecture microcontroller, 6-axis IMU sensor, RTC, audio codec with microphone, and power management system supporting a 3.7 V Li-Ion battery. The version with protective enclosure is designed for portable devices, HMI panels, and interactive embedded systems requiring high-quality image output and touch support. Waveshare RP2350-Touch-AMOLED-1.75-B
zł160.02
6 weeks
No product available!
RP2350 1.75" 466×466 with 65K color AMOLED display and capacitive touch panel, equipped with the RP2350A dual-core, dual-architecture microcontroller, 6-axis IMU sensor, RTC, audio codec with microphone, and power management system supporting a 3.7 V Li-Ion battery. The board provides SPI, I2C, UART, ADC, PWM, and USB Type-C interfaces, enabling the development of portable devices, HMI panels, and interactive embedded systems requiring high-quality display output and touch support. Waveshare RP2350-Touch-AMOLED-1.75
zł143.93
6 weeks
No product available!
An educational kit with a 2.7-inch e-Paper display with a resolution of 264 x 176 pixels and four grayscale levels, ideal for presenting schedules, QR codes, and IoT messages. The device is based on a dual-core RP2350A microcontroller (2 x Arm Cortex-M33 250 MHz) with 520 KB of SRAM, 16 MB of QSPI Flash, and 8 MB of PSRAM. Connectivity is provided by a Wi-Fi and Bluetooth module (CYW43439). A built-in 1000 mAh LiPo battery, charged via USB-C, enables long, energy-efficient operation, and the RTC allows for the development of cyclic applications. Pimoroni WARE001
zł356.28
4 weeks
No product available!
An educational kit with a 2.7-inch e-Paper display with a resolution of 264 x 176 pixels and four grayscale levels, ideal for presenting schedules, QR codes, and IoT messages. The device is based on a dual-core RP2350A microcontroller (2 x Arm Cortex-M33 250 MHz) with 520 KB of SRAM, 16 MB of QSPI Flash, and 8 MB of PSRAM. Connectivity is provided by a Wi-Fi and Bluetooth module (CYW43439). A built-in 1000 mAh LiPo battery, charged via USB-C, enables long, energy-efficient operation, and the RTC allows for the development of cyclic applications. Pimoroni WARE004
zł485.94
4 weeks
No product available!
Educational kit with a 2.8" color TFT IPS display with a resolution of 320 × 240 px and adjustable backlight, ideal for game development, data visualization, and IoT projects. The device is based on the RP2350B microcontroller (2 × Arm Cortex-M33 250 MHz) with 520 KB SRAM, 16 MB QSPI Flash, and 8 MB PSRAM, and connectivity is provided by a Wi-Fi and Bluetooth module (CYW43439). A built-in 1000 mAh LiPo battery charged via USB-C guarantees mobile operation without a constant power supply. Five buttons, an I2C Qwiic/STEMMA QT connector, and MicroPython support make the kit a versatile platform for learning programming and STEM experiments. Pimoroni WARE002
zł356.36
4 weeks
No product available!
Educational kit with a 2.8" color TFT IPS display with a resolution of 320 × 240 px and adjustable backlight, ideal for game development, data visualization, and IoT projects. The device is based on the RP2350B microcontroller (2 × Arm Cortex-M33 250 MHz) with 520 KB SRAM, 16 MB QSPI Flash, and 8 MB PSRAM, and connectivity is provided by a Wi-Fi and Bluetooth module (CYW43439). A built-in 1000 mAh LiPo battery charged via USB-C guarantees mobile operation without a constant power supply. Five buttons, an I2C Qwiic/STEMMA QT connector, and MicroPython support make the kit a versatile platform for learning programming and STEM experiments. Pimoroni WARE005
zł485.94
4 weeks
No product available!
An interactive educational kit with a 39 x 26 LED matrix (872 diodes) capable of displaying animations, text, and pixel graphics. At the heart of the device is a dual-core RP2350A microcontroller (2 x Arm Cortex-M33 250 MHz) with 520 KB SRAM, 16 MB QSPI Flash, and 8 MB PSRAM. Connectivity is provided by a Wi-Fi and Bluetooth module (CYW43439). A built-in 1000 mAh LiPo battery charged via USB-C allows for mobile operation, while additional buttons and a RTC (Real Time Clock) enhance the device\'s functionality. Pimoroni WARE003
zł356.36
4 weeks
No product available!
An interactive educational kit with a 39 x 26 LED matrix (872 diodes) capable of displaying animations, text, and pixel graphics. At the heart of the device is a dual-core RP2350A microcontroller (2 x Arm Cortex-M33 250 MHz) with 520 KB SRAM, 16 MB QSPI Flash, and 8 MB PSRAM. Connectivity is provided by a Wi-Fi and Bluetooth module (CYW43439). A built-in 1000 mAh LiPo battery charged via USB-C allows for mobile operation, while additional buttons and a RTC (Real Time Clock) enhance the device\'s functionality. Pimoroni WARE006
zł485.94
4 weeks
No product available!
This development board for building robots and mechatronics projects features 2.4 GHz Wi-Fi and Bluetooth 5.2 connectivity. Based on the RP2350 microcontroller (Dual Arm Cortex-M33 up to 150 MHz, 520 KB SRAM, 4 MB QSPI Flash), it allows you to control two DC motors via a DRV8833C H-bridge and support up to six servos. It features 12 addressable RGB (Neopixel) LEDs, ADC inputs, numerous GPIOs, and two Qw/ST headers for connecting sensors. Pimoroni PIM733
zł250.55
24h
Available quantity: 2
Available
Module with RP2350B microcontroller, clock speed up to 150 MHz, 8 MB PSRAM, 16 MB Flash, 48 GPIO, 2.54 mm pitch, USB adapter and FPC cable included, dimensions 25.40 x 25.40 mm. Waveshare Core2350B2-Kit
zł33.42
6 weeks
No product available!
Module with RP2350B microcontroller, up to 150 MHz, 8 MB PSRAM, 16 MB Flash, 48 GPIO, 2.54 mm pitch, compact size 25.40 x 25.40 mm. Waveshare Core2350B2
zł30.47
6 weeks
No product available!
Module with RP2350B microcontroller, clock speed up to 150 MHz, 2 MB PSRAM, 16 MB Flash, 48 GPIO, 2.54 mm pitch, includes USB adapter and FPC cable, dimensions 25.40 x 25.40 mm. Waveshare Core2350B1-Kit
zł29.45
6 weeks
No product available!
Module with RP2350B microcontroller, clock speed up to 150 MHz, 2 MB PSRAM, 16 MB Flash, 48 GPIO, 2.54 mm pitch, compact size 25.40 x 25.40 mm. Waveshare Core2350B1
zł26.49
6 weeks
No product available!
Module with RP2350B microcontroller, clock speed up to 150 MHz, 0 MB PSRAM, 16 MB Flash, 48 GPIO, 2.54 mm pitch, includes USB adapter and FPC cable, dimensions 25.40 x 25.40 mm. Waveshare Core2350B0-Kit
zł26.49
6 weeks
No product available!
Module with RP2350B microcontroller, clock speed up to 150 MHz, 0 MB PSRAM, 16 MB Flash, 48 GPIO, 2.54 mm pitch, compact size 25.40 x 25.40 mm. Waveshare Core2350B0
zł23.54
6 weeks
No product available!
Development board with RP2350A microcontroller, 1.54" IPS touch LCD 240 x 240 px, USB-C interface, IMU module, microSD slot and 3.7 V battery included. Waveshare 34333