Best sellers

No Clean paste for soldering SMD components, containing a resin and solvent-based flux and thixotropic additives, retains its physicochemical properties for 20 hours on a PCB board, does not contain chlorides, and the flux residue does not corrode and does not require washing, ensuring good properties of soldered joints mechanical and electrical. ART.AGT-031

Provides quick component selection for electronic projects. An ideal choice for repair services, workshops, and technical education.

A solar cell with a power output of 0.7 W and a voltage output of 5.5 V, measuring 95 x 95 x 3 mm, equipped with pads for soldering wires. Ideal for powering small electronic devices in DIY projects.

DC motor driver with voltage 6.5..40V and maximum continuous current 21A. It has the ability to easily implement the feedback loop and numerous control interfaces. Polol 3149

RS422 to TTL converter module based on MAX490 for long-distance bidirectional serial communication, up to 1000 meters, with a transmission speed of up to 2.5 Mbps. Equipped with ESD protection up to 15 kV, TVS diodes and 120 Ω terminating resistors, it provides stability and immunity to interference in demanding industrial conditions. Powered by 5 V, it works with TTL logic and is compatible with popular platforms, and LED indicators facilitate diagnostics and integration.

Pin strip straight in black, single-row, female, 1x40, pitch 2.54mm, THT, RoHS. PB40S

Adapter from 16-pin OBD2 connector to DB9 connector on a 100 cm long cable

Module with 2 QTRX type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 30 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4442

Board with ATmega2560 microcontroller (256 kB Flash, 8 kB RAM, 4 kB EEPROM) clocked at 16 MHz. USB-UART converter based on the ATmega16u2 chip. The user has at his disposal, among others: 54 I/O lines, 14 PWM channels, 16 analog inputs.

Neodymium rectangular magnet with dimensions of 20x10mm a and a height of 1 mm.

SDR (software-defined radio) receiver with frequency range from 500 kHz to 1766 MHz. It can work as a radio receiver or a broadband scanner. RTL SDR RTL2832U

The BST-12095-DC-FT buzzer is an active sound transducer with a 12 mm diameter, powered by a 5 V DC supply. It generates a continuous sound signal without the need for an external driving signal, making it ideal for use in alarm and signaling systems.

Module with 9 QTRX type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4409

NUCLEO series starter kit equipped with a STM32WL55JC microcontroller (256 KB Flash, Cortex-M4/M0+), with a built-in STLINK-V3E programmer-debugger, equipped with Arduino-compatible connectors

Module with 5 QTR type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4145

Neodymium rectangular magnet with dimensions of 20x10mm a and a height of 2 mm.

Neodymium rectangular magnet with dimensions of 20x8mm a and a height of 2 mm.

ArduCam MT9D111 2MPx camera module with matrix MT9D111. Resolution: 1600 x 1200 pixels (2 MPx), pixel size: 2.8 x 2.8 μm, built-in JPEG encoder - operating in real time. ArduCAM B0054