Best sellers
There are 16516 products.
The 2WD Mobile Robot Platform for Arduino is a small, low-cost mobile platform for use with a standard Arduino microcontroller. The robot comes as a kit which includes two drive motors, wheels (and rear caster ball), frame and all mounting hardware. The main structure and mechanical parts for a robot. ROB0005
Controller module dedicated to Arduino boards. Equipped with 4 buttons, a two-axis joystick and an Xbee connector. DFRobot DFR0008
Splitter POE 12V / 2A ideal for powering CCTV cameras and network equipment. The converter allows you to supply devices with 12 V voltage using energy transferred via Ethernet network using Power Over Ethernet technology (PoE IEEE802.3 AF / AT). The adapter also allows you to connect to the ethernet network at a speed of 10 / 100Mbit. Model Hi-P05-B
Recorder v3.0 is a module that allows you to record and play sounds. The module was based on the ISD9160FI system, it also has a FLASH memory with a capacity of 2 MB, which allows for recording up to 83 seconds long. The set contains a small loudspeaker on which recorded sounds can be played. Seeed studio 107020029
Base board for Raspberry Pi CM4 modules. It integrates the function of an uninterruptible power supply, PoE circuit, it is equipped with connectors for all available interfaces, in addition, there is an RTC system on the board and a fan connector. Waveshare Compute Module 4 PoE Board
A complete set for building a mobile platform Pirate-4WD
Module with LoRa transmitter based on RFM95 (SX1276 LoRa®). It works with a frequency of 433 MHz, maximum power up to 100 mW and a power gain of up to + 20dBm. The module has a built-in antenna, but it is possible to connect an external antenna (MHF connector). The module has a connector in accordance with the Grove standard. Seeed studio 113060007
Module with WiFi and BLE Espressif ESP32-S3. It integrates a LiPo charging circuit and an RGB diode. Equipped with a STEMMA QT connector. Adafruit 5401
Module with WiFi Espressif ESP32. It offers 8MB Flash, 2MB PSRAM, LiPo charging circuit and RGB LED. It is equipped with a STEMMA QT connector. Adafruit 5438
Module with GNSS PA1616D receiver based on the MTK3333 chip. Supports GPS and GLONASS positioning systems. Adafruit 5440
4-core cable with a length of 400 mm. Both ends with STEMMA QT (Qwiic) plug. Adafruit 5385
All-in-one microcontroller especially designed for robotics application. Benefit from Arduino open source platform, it is supported by thousands of open source codes, and can be easily expanded with most Arduino Shields. The integrated 2 way DC motor driver and wireless socket gives a much easier way to start your robotic project. DFR0004
Universal display driver with HDMI output. The kit includes the ATOM PSRAM module that provides Wi-Fi 2.4G communication, has 8 MB Flash memory and 2 MB PSRAM. M5Stack K115
7-segment LED display, 1 digit 25.40mm, green (575nm), 7000ucd (10mA), common anode, red (630nm), 13000ucd (10mA), common anode. Pb-free. LED1-AS-B-10016DMRMG
The MPX5700AP air pressure sensor with a measuring range from 15 to 700 kPa. It communicates via the I2C interface. DFRobot SEN0456
A set for building a mobile robot with Mecanum chassis based on Raspberry Pi. Equipped with the Raspberry Pi Build HAT expansion module. Waveshare BuildMecar-Kit-A
Camera for Raspberry Pi CM3, CM3+ and NVIDIA Jetson Nano. It was equipped with a Sony IMX477R sensor with a resolution of 12.3MPx and a built-in IR filter. Waveshare IMX477 12.3MP Camera
ACeP e-Paper 7-color display with a diagonal of 5.65" and a resolution of 600×448 px. SPI interface. Without PCB. Waveshare 5.65inch e-Paper (F)
Module with a black and white OLED display with a diagonal of 1.12" and a resolution of 128x128 px. The board is equipped with a Grove connector and communicates via the I2C and SPI interface. Seeed Studio 104020250