Best sellers

Industrial module with 4 relays with a load of up to 10 A. It uses the Modbus RTU protocol and the RS485 or RS232 communication interface. DFRobot FIT0827

Module with a bistable button and blue LED backlight. The board is equipped with a Gravity connector and communicates via a digital interface. DFRobot DFR0785-B

NUCLEO series starter kit equipped with a STM32WL55JC microcontroller (256 KB Flash, Cortex-M4/M0+), with a built-in STLINK-V3E programmer-debugger, equipped with Arduino-compatible connectors

7-segment LED display, 1 digit 38.10mm, amber (605nm), 15,000ucd (10mA), common anode, Pb-free. LED1-AS-B-15011BMA

Finder 12.62.8.230.0000 is a weekly time switch with two 16 A contacts and the ability to be programmed both manually and via NFC. It is used for automating lighting, heating, and other timed systems in residential and industrial installations.

7-segment LED display, 1 digit 38.10 mm, blue light (470nm), 12 mcd (10mA), common anode, Pb-free. LED1-AS-B-15011BMB

Finder 70.41.8.400.2030 is a voltage monitoring relay for three-phase AC networks with an interphase voltage of 380–415 V AC. The device allows for delay adjustment in the range of 0.5 to 60 seconds, and its output is a single-pole double-throw (SPDT) contact with a 6 A load capacity at 250 V AC. The relay is designed for DIN rail mounting and is equipped with screw terminals.

Female terminal block, 2-pin. Pitch 3.5mm. Height 7.8mm. Suitable for KF2EDGR male strips with a pitch of 3.5 mm. 2EDGKN-3.5

Module with the LIS2DW12 3-axis accelerometer. The system has a user selectable measurement scale of ± 2g/±4g/±8g/±16g. There is a Gravity connector on the board. DFRobot SEN0409

SoM Raspberry Pi CM4 Lite with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5 GHz, 8 GB LPDDR4 RAM. Raspberry Pi CM4008000

ARM920T, 16kB RAM, 2x16kB cache, Ethernet MAC, USB Host / Device, PQFP208

12V relay module with a radio receiver in a set with a remote control operating at 433 MHz.

SoM Raspberry Pi CM4 with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5 GHz, 4 GB LPDDR4 RAM, 32 GB eMMC and wireless connectivity. Raspberry Pi CM4104032

Module with a button and green LED backlight. The board is equipped with a Gravity connector and communicates via a digital interface. DFRobot DFR0785-G

HMI (Human-Machine Interface) operator panel for visualization and interaction with automation systems. It uses a 7" LCD display with 800x480 pixel resolution with a touch panel. It supports various communication protocols such as RS232, RS485. Kinco GL070

A module with a MEMS microphone that will allow you to detect a voice, a clap or a door slam. The board has an analog output. DFRobot SEN0487

DC-DC Step-Down converter module with 5V output voltage and 1A output current. The module can be a replacement for the popular LM7805 regulator.

Advanced GNSS receiver based on the Quectel LG290P module, which supports four frequency bands: L1, L2, L5 and E6, enabling reception of signals from GPS, GLONASS, Galileo, BDS, QZSS and NavIC satellite systems. With support for SBAS and PPP, the module provides highly precise positioning, and the built-in anti-jamming unit minimizes electromagnetic interference, which ensures reliability in difficult conditions. The Qwiic connector allows easy integration with systems, and low power consumption makes it an ideal solution for applications requiring long-term battery operation. SparkFun GPS-26620

ANT0017 enables connecting 2.4 GHz WiFi devices to an external 5 dBi gain antenna, improving signal range and stability. The RP-SMA connector and U.FL/IPX cable ensure wide compatibility with communication modules and networking equipment. ANT0017