Best sellers
There are 16464 products.
A small magnet designed for mounting RGB matrix displays. It fits perfectly into the holes in the panels
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 2 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Waveshare RP2040-LCD-0.96
Board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores and a 5x5 RGB LED matrix. There is also 2 MB of QSPI flash memory on the board. The circuit can be programmed in C/C++ or MicroPython. Waveshare RP2040-Matrix
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 2 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Waveshare RP2040-LCD-0.96-M
A module with a 3-channel ADC ADC ADS1015, which allows you to read voltages from -24 V to +24 V with a sampling frequency of up to 3.3 kHz and a resolution of 12 bits. Pimoroni PIM422
Module with pressure and temperature sensor BMP280. It allows to read the atmospheric pressure in the range from 300 to 1100 hPa and communicates via the I2C interface. Pimoroni PIM411
Development board equipped with ESP32-S3-WROOM-1 module. It is an interesting alternative to Arduino Uno boards. It has a compatible shape and pin layout, while making available the large resources offered by the ESP32 microcontroller. It can be programmed with Arduino, ESP-IDF, MicroPython and CircuitPython. SB Components 26647
A small module with a 1.54" LCD display and a resolution of 240x240 pixels, equipped with an RP2040 microcontroller. It is programmed via a USB type C connector. SB Components 25619
Audio module with DAC converter and mono amplifier, designed to work with the Raspberry Pi. Pimoroni PIM541
Audio module with DAC, stereo amplifier and display, designed to work with the Raspberry Pi. Pimoroni PIM484
A Thing Plus development board that combines the Matter protocol and the Qwiic SparkFun ecosystem to facilitate the prototyping of IoT devices. It uses the MGM240P module from Silicon Labs, which provides secure connectivity for both 802.15.4 with Mesh (Thread) and Bluetooth® Low Energy 5.3 protocols. SparkFun DEV-20270
A set of two white plastic brackets for mounting micro Pololu motors. Mounting screws and nuts are included. Pololu 1086
A compact stepper motor controller with a TMC2225 system with an operating voltage from 4.75 to 36 V. It offers smooth, quiet operation, high efficiency, various operating modes and easy configuration. It is controlled via a STEP/DIR or UART interface and is an ideal solution for 3D printers and similar applications
Water pump with a capacity of 1300 l/h. It has a built-in electronic reed switch sensor and is powered by 12 or 24 V
Module with a knock-on sensor for measurement of methane, propane and carbon monoxide (MQ-9) concentrations. The module has an analogue output and an output triggered by exceeding the threshold of sensitivity.
Module with IPS LCD display with a diagonal of 2" and a resolution of 320x240 px. Communication via the SPI interface. Pimoroni PIM580
Module with IPS LCD display with a diagonal of 2" and a resolution of 320x240 px. Communication via the SPI interface. Waveshare Pico-LCD-2
IPS 7" LCD display with touch screen. Equipped with DSI interface for image display and I2C interface for touch screen. Resolution 1024x600 px. Housing included. Waveshare 7inch DSI LCD (C) (with case A)
Network analyzer with two ports. It can perform measurements for frequencies from 100 kHz to 5.3 GHz. Equipped with an LCD display, it can be connected to a computer via USB. TinySA Ultra