Best sellers

The TTL TO RS485 (C) module enables the conversion of TTL serial signals to differential RS485 while maintaining high noise immunity and galvanic isolation. With its compact design and built-in ESD and surge protection, it is well-suited for automation systems, IoT, industrial applications, and distributed communication—especially in high-interference environments.

The ESP32-S3-Touch-LCD-1.69 board integrates Wi-Fi/Bluetooth microcontroller functionality with a color touch screen, IMU sensor, and RTC clock, offering a development platform for compact applications with a user interface. It is dedicated to use in wearable devices, HMI terminals, activity trackers, and modern low-power IoT solutions.

The 2-CH CAN HAT+ expansion board adds two isolated CAN channels to the Raspberry Pi, with support for further expansion. Featuring the HAT+ standard, galvanic isolation, and surge protection, it is well-suited for industrial, automotive, and automation applications where reliable and safe serial communication is essential.

7 "LCD TFT display module, 800 x 480 pixels (8: 5) resolution, 8080 interface, LED backlight, I2C touch panel, Waveshare 7inch Capacitive Touch LCD (C)

The Li-Ion battery charger module is designed to work with solar panels. The charger can supply a current of up to 500 mA. The module input voltage is in the range of 4.4 to 6 V.

Capacitive proximity sensor with PNP NO output. It can detect the presence of various objects in the range from 1 to 10 mm. The sensor is supplied with the voltage from 6 to 36 V and consumes a current of up to 300 mA. LJC18A3-H-Z/BY

12V relay module with a radio receiver in a set with a remote control operating at 433 MHz.

Module with ATmega4808 microcontroller from AVR family (48 KB Flash, 6 KB SRAM, 256 B EEPROM). The module has 14 I / O lines, 6 PWM channels, 8 analog inputs.

Real-time clock / calendar, DIP8, NXP, RoHS

Waveshare 3.4inch 800x800 LCD is a modern round touch screen with an IPS panel and HDMI and USB-C interfaces, designed for use in advanced control and information devices. Thanks to optical bonding technology and high touch sensitivity, it is ideal for projects in home automation, industrial systems, and consumer electronics.

Wind meter with temperature measurement function. The device can measure wind speed up to 30 m/s and wind temperature from -10 to 50℃. Uni-T UT363

The LM2596 module with an adjustable step-down converter is a versatile tool for powering and testing electronic circuits. It allows convenient voltage adjustment with precise parameter monitoring thanks to the built-in voltmeter. Ideal for prototyping, laboratory experiments, and service work.

High-quality digital-to-analog converter that allows for pure stereo audio playback without the need for I2C configuration or the MCLK pin. It supports I2S signals (BCLK, WSEL, DIN) and audio formats up to 32 bits and 384 kHz, providing an excellent signal-to-noise ratio (110 dB). Audio output is available via a 3.5 mm jack or on-board pads, and the module works best as a line output to amplifiers and audio systems. Adafruit 6251

The clamp meter measures DC voltage, AC voltage and current, capacitance, frequency, temperature and resistance. Equipped with diode test, circuit continuity test and NCV test function. Uni-T UT213B

The socket tester allows you to check for sockets wiring errors. It helps to detect errors such as missing one of the wires or their incorrect connection. Uni-T UT07A-EU

Mains socket with an electricity consumption meter. It is used to monitor the operating status (voltage, current, time and power consumption) of electrical devices. Uni-T UT230B-EU

High-end temperature and humidity sensor module, offering ±1.0% RH and ±0.1°C precision and full I2C communication. With 3.3 to 5V voltage compatibility, STEMMA QT connectors and IP67 protection, it is easy to integrate and resistant to harsh environmental conditions. Ideal for IoT projects, weather stations and automation systems requiring accurate measurements. Adafruit 6174

A modern development board in the Feather format, equipped with a dual-core Raspberry Pi RP2350 Cortex M33 microcontroller clocked at 150 MHz and 8 MB of PSRAM, ideal for advanced IoT projects and Micropython/CircuitPython applications. The board offers a wide range of ports, including an HSTX 22-pin connector, USB-C with bootloader, and STEMMA QT, as well as numerous GPIOs and an integrated LiPo battery charger, combining high performance with convenience of use. Adafruit 6130