 
        
           
        
           
         
           
           
          zł91.56 tax excl.
Base board prepared for Raspberry Pi CM4 modules. It is equipped with connectors for all available interfaces, additionally on the board there is a RTC system and a fan connector. Waveshare CM4-IO-BASE-B
Base board designed for Raspberry Pi CM4 modules. It is equipped with special connectors for connecting the module and the outputs of all CM4 module interfaces, including USB, Ethernet, HDMI, DSI, two CSI connectors, 40-Pin GPIO connector compatible with HAT modules. The Mini Base Board is additionally equipped with a real-time clock (RTC) chip, a backup battery socket as well as a fan connector and a microSD card slot. At the bottom of the board there is also an M.2 connector for connecting additional modules or a disk and an FFC connector with a USB 2.0 and HDMI interface. Full documentation is available on the product Wiki page.


The 40-pin connector is color-coded, which makes it easy to connect expansion modules. The board has compact dimensions (85 x 56 mm) corresponding to the dimensions of the Raspberry Pi 4 model B minicomputers, thanks to which, after connecting the Raspberry Pi CM4 module (not included), it can be a replacement for standard Raspberry Pi minicomputers.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Cable with USB typ A and USB typ C connectors, cable length 1 m. LANBERG CA-USBO-10CC-0010-BK
Cable with USB typ A and USB typ C connectors, cable length 1,8 m. LANBERG CA-USBO-10CC-0018-BK
SoM Raspberry Pi CM4 Lite with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5 GHz, 1 GB LPDDR4 RAM. Raspberry Pi CM4001000
SoM Raspberry Pi CM4 with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5 GHz, 1 GB LPDDR4 RAM and 8 GB eMMC. Raspberry Pi CM4001008
 No product available!
SoM Raspberry Pi CM4 with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5 GHz, 1 GB LPDDR4 RAM and 16 GB eMMC. Raspberry Pi CM4001016
 No product available!
SoM Raspberry Pi CM4 with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5 GHz, 1 GB LPDDR4 RAM and 32 GB eMMC. Raspberry Pi CM4001032
Base board prepared for Rasberry Pi CM4 modules. It integrates the PoE circuit, it is equipped with connectors for all available interfaces, additionally on the board there is an RTC system and a fan connector. Waveshare Compute Module 4 PoE Board
PCIe to M.2 key M connector adapter designed to work with Raspberry Pi CM4 modules. It allows you to connect an NVMe SSD with an M.2 connector to the backplane via a PCIe connector. Waveshare PCIe TO M.2 (A)
PCIe connector adapter to 4 USB 3.2 Gen1 slots designed to work with Raspberry Pi CM4 modules. It allows you to connect devices with a USB connector to the base board via a PCIe connector. Waveshare PCIe TO USB 3.2 Gen1 (B)
4-channel PCIe port expander. It can be powered with 12 V via a PCIe connector or an external DC connector. Waveshare PCIe-Packet-Switch-4P
Kit with base board for Raspberry Pi CM4. Equipped with an LCD display with a touch panel, a 5 MP camera and a set of connectors. Waveshare CM4-DISP-BASE-7A-BOX-EU
Base board dedicated to Raspberry Pi CM4 modules. It is equipped with two cameras with an IMX219 sensor with a resolution of 8 MP. Waveshare CM4-DUAL-CAMERA-BASE
PoE HAT (H) is a high-efficiency power supply add-on for Raspberry Pi 5 and Compute Module 5, enabling data transmission and power delivery over a single Ethernet cable in accordance with the IEEE 802.3af/at standard. Thanks to the use of an isolated switching converter and compatibility with the official enclosure, it is suitable for stable and compact integration in network, automation, and remote device management projects.
100-pin connector (socket) for Raspberry Pi CM4 modules. Pitch 0.4 mm, height 2.9 mm
A set for building a minicomputer based on Raspberry Pi CM4. It consists of a display enclosed in a housing, a power supply and an antenna. Waveshare 13.3inch PiPad C4
 No product available!
A base board dedicated to Raspberry Pi CM4 modules. It is equipped with connectors for basic interfaces including USB, USART, SPI and I2C. Seeed Studio 103100163
 No product available!
A set of minicomputer with a base board, to which the Raspberry Pi Compute Module can be connected and the Raspberry Pi resources can be flexibly used. Has support for Raspberry Pi CM3/CM3L/CM3+/CM3+L modules. The set is equipped with additional cooling in the form of a fan. Waveshare CM-IO-POE-BOX-EU
reTerminal DM Dual LAN and SSD is an expansion module adding two Gigabit Ethernet ports and an NVMe SSD slot to the reTerminal DM panel. It enables system expansion with increased network bandwidth, redundant connections, and local data storage for industrial and IoT applications.
 No product available!
A kit for building a NAS server with a Raspberry Pi CM4 module (1.5GHz 4GB RAM 8GB eMMC WiFi/Bluetooth). It has space to mount two 2.5" SATA drives and an LCD display to monitor the minicomputer\'s operating status. Waveshare CM4-NAS-Double-Deck-C4A (EU)
 No product available!
A set for building a minicomputer based on Raspberry Pi CM4. It consists of a metal case with a fan, a power supply and a Mini Base Board (B). Waveshare CM4-IO-BASE-BOX-B
CMX-ADAPTER is a protection board dedicated to Raspberry Pi CM4 and CM5 modules, designed for intensive use and repeated connection with base expansion boards. It facilitates integration and protects connectors from mechanical damage.
 No product available!
Base board dedicated to Raspberry Pi CM4 modules. Equipped with a 2.8" IPS LCD display. Waveshare CM4-DISP-BASE-2.8A
Base board dedicated to Raspberry Pi CM4 modules. It is equipped with connectors for all available interfaces. Waveshare CM4-IO-BASE-A
A kit for building a minicomputer based on the Raspberry Pi CM4. It consists of a metal case with a fan, a power supply and a WIFI6 Dual ETH Base Board. Waveshare CM4-DUAL-ETH-WIFI6-BOX (EU)
 No product available!
Carrier board dedicated to Raspberry Pi CM4 modules. It is equipped with two Ethernet connectors, a microSD slot and a USB connector. It allows you to build a small router. DFRobot DFR0767
 
                    Base board prepared for Raspberry Pi CM4 modules. It is equipped with connectors for all available interfaces, additionally on the board there is a RTC system and a fan connector. Waveshare CM4-IO-BASE-B