PoE HAT+ M.2 E Key Acce A PCIe with Wireless-AX210 and antennas for Raspberry Pi 5 - Waveshare 30396
ID: 1197687
5902186322028
zł178.14
Tax included
zł144.83 tax excl.
The PoE M.2 E KEY HAT+ Acce A kit expands the capabilities of the Raspberry Pi 5 with modern communication interfaces and Power over Ethernet (PoE) power supply. It enables the use of the Intel AX210 wireless module with support for Wi-Fi 6E and Bluetooth 5.3, providing fast and stable network access as well as wireless connectivity. With 5 V and 12 V power outputs, the adapter also serves as a power source for additional modules and devices in networking, industrial, and IoT projects.
Description
The PoE M.2 E KEY HAT+ adapter for Raspberry Pi 5 allows connection of NGFF (M.2 E Key) wireless network modules, including the Intel Wireless-AX210, providing support for Wi-Fi 6E and Bluetooth 5.3. Power is supplied via PoE compliant with IEEE 802.3af/at, enabling simultaneous data and power transmission over a single Ethernet cable. The board offers 5V and 12V power outputs for powering the Raspberry Pi and external devices. Two female SMA connectors provide convenient antenna connection. A built-in USB connector allows Bluetooth signal transmission from the wireless module to the Raspberry Pi. The adapter is compliant with the HAT+ standard and features a 40PIN GPIO header for stacking with other HATs.
Features
- Compatibility with Raspberry Pi 5 via 16PIN PCIe connector
- PoE support (IEEE 802.3af/at), power input 37–57 V DC
- Power outputs: GPIO – 5 V 4.5 A, 2P connector – 12 V 2 A
- Supports Wireless-AX210 module (included), Wi-Fi 6E, Bluetooth 5.3
- Compatible with NGFF (M.2 A/E Key and E Key) modules
- Compliant with HAT+ and Raspberry Pi 40PIN GPIO standard
- Two female SMA connectors for Wi-Fi antennas
- Supports Bluetooth transmission to Raspberry Pi via USB (when module is connected)
- Dimensions: 56 × 85 mm
Included in the set
- PoE M.2 E KEY HAT+ x1
- Wireless-AX210 module x1
- Wi-Fi antennas ~11 cm ×2
- IPEX 1 to IPEX 4 cable ~6 cm ×2
- USB Type-C (E) adapter x1
- PCIe 16PIN – 40 mm cable x1
- Mounting screw set x1
1197687
Data sheet
- Compatible with
- Raspberry Pi 5
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
Versatile CAN bus interface based on the MCP2518FD controller, enabling communication in CAN 2.0 and CAN FD modes via SPI interface, compatible with SBC computers, including Raspberry Pi 5, with additional security and the ability to support two modules simultaneously
zł69.77
24h
Available quantity: 111
Available
Expansion board with LoRa E22-900T22S module for Raspberry Pi. Allows communication in the 868 MHz frequency band. Waveshare SX1262 868M LoRa HAT
zł129.83
4 weeks
No product available!
SIMCom 4G SIM7600G-H module kit designed to work with Raspberry Pi minicomputer. It supports 4G, 3G, 2G networks and GNSS positioning. Waveshare SIM7600G-H 4G HAT (B)
zł348.52
4 weeks
No product available!
GSM/GNSS expansion module dedicated to Raspberry Pi minicomputers. Allows to equip RPi with LTE Cat-1/3G/2G communication and positioning within GPS, BeiDou, Glonass, GALILEO, QZSS navigation systems. Waveshare SIM7600E LTE Cat-1 HAT
zł254.56
24h
Available quantity: 2
Available
HAT module designed for Raspberry Pi minicomputer. Powala adds two CAN interfaces to the project. Waveshare 2-CH CAN HAT
zł89.25
4 weeks
No product available!
Highly cost-effective multimedia hat compatible with the Raspberry Pi Model B+/2B/3B. Decodes and separates voices from HDMI signal, completely solving the poor quality problem with Raspberry Pi integrated sound card. DFR0450
zł238.80
4 weeks
No product available!
Radio module with RFM69HCW 433 MHz chip, designed to work with the Raspberry Pi. Equipped with an OLED display and buttons. Adafruit 4073
zł144.14
24h
Available quantity: 2
Available
PoE HAT (G) allows Raspberry Pi 5 to be powered without the need for an additional power cable, using only an Ethernet cable compatible with Power over Ethernet technology. With high output power and a compact design, the HAT is ideal for projects requiring stability, space efficiency, and clean integration—especially when used with the official Raspberry Pi 5 case.
zł64.94
4 weeks
No product available!
NFC reader module dedicated to the Raspberry Pi. It is based on the PN532 operating in the 13.56 MHz frequency range. Waveshare PN532 NFC HAT
zł96.42
4 weeks
No product available!
RS485 CAN HAT is an extension designed for the Raspberry Pi mini-computer in the form of a HAT overlay. Adds RS485 and CAN interfaces for the Raspberry Pi plate. Interface signals are derived as screw and goldpin connectors. RS485 CAN HAT
zł43.90
24h
Available quantity: 20
Available
Modern SSDs are most commonly equipped with a high-speed NVMe interface, implemented through an NGFF connector with an M-key, known as M.2 M-key. The KAmod USB-PCIE-M2 adapter allows you to connect an M.2 M-key SSD to a computer via a USB port.
zł78.15
24h
Available quantity: 136
Available
A two-channel RS485 expansion module designed for the Raspberry Pi. It uses the TP75176E transceiver and CH432T chip and offers a stable connection between devices. DFRobot DFR0824
zł135.40
24h
Available quantity: 2
Available
KAmodRPI RS485 CAN HAT is a shield for the Raspberry Pi computer that extends its interfaces with RS485 and CAN. Bus signals are led out to goldpin connectors and terminal blocks.
zł39.90
24h
Available quantity: 89
Available
Expansion board with LoRa E22-400T22S module for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band. Waveshare SX1268 433M LoRa HAT
zł95.96
4 weeks
No product available!
Board with the NB-IoT SIM7028 module intended for Raspberry Pi. It communicates via the UART interface and AT commands. Waveshare SIM7028-NB-IoT HAT (EN)
zł85.47
24h
Available quantity: 2
Available
UART debugger module designed specifically for Raspberry Pi 5. Allows easy connection to UART debug connector via SH1.0 3PIN cable, ensuring convenient and effective debugging. Waveshare Pi UART Debugger
zł15.60
24h
Available quantity: 5
Available
The PoE M.2 E KEY HAT+ Acce A kit expands the capabilities of the Raspberry Pi 5 with modern communication interfaces and Power over Ethernet (PoE) power supply. It enables the use of the Intel AX210 wireless module with support for Wi-Fi 6E and Bluetooth 5.3, providing fast and stable network access as well as wireless connectivity. With 5 V and 12 V power outputs, the adapter also serves as a power source for additional modules and devices in networking, industrial, and IoT projects.