![Gravity: Analog 20A Current Sensor - module with analog 20A AC/DC current sensor Gravity: Analog 20A Current Sensor - module with analog 20A AC/DC current sensor](https://kamami.pl/29232-large_default/gravity-analog-20a-current-sensor-module-with-analog-20a-acdc-current-sensor-sen0214.jpg)
![Gravity: Analog 20A Current Sensor - module with analog 20A AC/DC current sensor Gravity: Analog 20A Current Sensor - module with analog 20A AC/DC current sensor](https://kamami.pl/29232-large_default/gravity-analog-20a-current-sensor-module-with-analog-20a-acdc-current-sensor-sen0214.jpg)
zł36.96 tax excl.
Module with an analog current sensor. Enables measurement of alternating and direct current up to 20 A. DFRobot SEN0214
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
Module with an analog current sensor. It enables the measurement of alternating and direct currents up to 20 A. The module has an analog output compatible with the Gravity standard. The measurement is based on the use of the Hall effect. At the bottom of the plate there is an acrylic insulation protecting against accidental short circuits. The module will be used in projects of controlling automation devices. On the Wiki page there is a user manual with a sample Arduino program.
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
Expansion board for Arduino, allows easy connection of XBee modules, has separate outputs for I2C, SPI and UART buses. The built-in 3.3V voltage stabilizer and operating mode switch make it easier to program the Arduino when the XBee module is connected to the sockets. DFRobot DFR0265
Module with an analog AC current sensor in a set with a probe for non-contact measurement of alternating current with a current of up to 20 A. DFRobot SEN0211
Board with ATmega1280 microcontroller from the AVR family, the user has 54 I/O lines, 14 PWM channels, 16 analog inputs. DFRobot DFR0003
No product available!
Module with INA228 sensor designed for power monitoring. It allows you to measure voltages up to 85 VDC and currents up to 10 A. It uses a 20-bit ADC converter, which guarantees very precise and accurate measurements available via the I2C bus. Adafruit 58332
No product available!
Module with ACHS-7122 current sensor with a measuring range of direct and alternating current from -20 to 20 A. It communicates via an analog interface. Pololu 4031
ACS723 current sensor module with a DC and AC measuring range of ± 5 A. It can read very low currents of 10 mA. It communicates via the analog interface. SparkFun SEN-14544
No product available!
The module with the ACS725 current sensor with a direct current measuring range up to 10 A. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020616
ACS724LLCTR-2P5AB current sensor module with a DC and AC measurement range from -2.5 to +2.5 A. It communicates via an analog interface. Pololu 4040
Module with an analog AC current sensor in a set with a probe for non-contact measurement of alternating current with a current of up to 10 A. DFRobot SEN0288
Module with a current and voltage sensor dedicated to Feather boards. Can measure voltage up to 26 V and current up to 3.2 A. Based on INA219 sensor, I2C communication. Adafruit 3650
Voltage and current sensor module. It works with a shunt resistor and voltage divider and the INA-169 chip and can measure voltages up to 52 V and currents up to 45 A. SparkFun SEN-16407
No product available!
ACS711EX Current Sensor Carrier -15.5A to +15.5A
The current measurement of 0 - 30A is carried out by the ACS712-30 system based on the Hall effect. The sensitivity of the system is 66mV / A (analog signal).
No product available!
A digital precision current sensor module that measures voltage, current and power of electronic modules and devices up to 26V and 8A with a relative error of ± 0.2%. DFRobot SEN0291
Module with an analog current sensor. It enables the measurement of AC and DC current up to 50 A. DFRobot SEN0098
No product available!
INA169 current sensor module. The system can be supplied with the voltage from 2.7 V to 60 V and has an analog output. SparkFun SEN-12040
Voltage and current sensor module. It works with a shunt resistor and voltage divider and the INA-169 chip and can measure voltages up to 52 V and currents up to 90 A. SparkFun SEN-16408
No product available!
Module with an analog current sensor. Enables measurement of alternating and direct current up to 20 A. DFRobot SEN0214