12 V DC motor DCGM-3865 with gearbox and 240 RPM encoder - Waveshare 22346
ID: 1181058
5906623438969
zł50.65
Tax included
zł41.18 tax excl.
DC motor with an offset output shaft gear. Equipped with a magnetic encoder. Waveshare DCGM-3865-12V-EN-240RPM
Description
DC motor with offset output shaft gear (L-shaped). It is powered with a voltage of 12 V and can reach a rotation speed of up to 240 rpm. It has a maximum torque when stopped 8.5 kg * cm and can consume a current of up to 3.5 A. The motor is equipped with a Hall incremental encoder with a resolution of 11 pulses per revolution of the motor, which with a ratio of 1:42 gives a resolution of 462 pulses per revolution output shaft. The rotation sensor is supplied with the voltage of 3.3 V or 5 V. Full documentation is available on the product page.
Features
- Supply voltage: DC 12V
- Power: 5.2 W
- Speed (no load): 240 rpm
- Torque (engine locked): ≥8.5 kg*cm
- Current consumption without load: 0.15 A
- Locked current consumption: ≤3.5 A
- Incremental encoder:
- Type AB: incremental magnetic Hall encoder
- DC 3.3 V to 5 V power supply
- With pull-up resistor, directly connected to the MCU
- PH2.0-6PIN connector
- 100 kHz frequency
- Number of fields: 22 (11 pairs)
- Rotation sensor resolution: 11 PPR × 42 = 462 PPR
- Rated speed: 125 rpm
- Gear ratio: 1:42
- Rated current: 1 A
Kit contains
- DCGM-3865-12V-EN-240RPM motor
- Wire
1181058
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Dual MC33926 Motor Driver CarrierTwo-channel DC motor controller with voltage from 5 V to 28 V, power consumption up to 3 A per channel. Controlled by PWM signal. Pololu 1213
zł232.97
Delivery date unknown
No product available!
This powerful motor controller makes closed-loop speed or position (but not both!) control of a brushed DC motor easy, with quick configuration over USB using our free software. It supports five control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), and hobby radio control (RC).
zł450.07
24h
Available quantity: 1
Available
Dual DC motor controller designed for Raspberry Pi, which enables the engine to be supplied with voltage in the 4.5-28V range and power consumption in continuous operation of 2.6A (5A in peak) of two DC motors. Pololu 2762
zł155.91
24h
Available quantity: 1
Available
Dual DC motor controller designed for Raspberry Pi, which enables the engine to be supplied with voltage in the 4.5-28V range and power consumption in continuous operation of 2.6A (5A in peak) of two DC motors. Self-assembly set. Pololu 2761
zł134.54
24h
Available quantity: 1
Available
Other products in the same category (16)
Small motor with metal gear and encoder, rotation speed 30 RPM, operating voltage 6 V. GA46-N20E-0042
zł39.00
24h
Available quantity: 7
Available
Small motor with metal gear and encoder, rotation speed 50 RPM, operating voltage 6 V. GA46-N20E-0043
zł37.00
4 weeks
No product available!
Small motor with metal gear and encoder, rotation speed 60 RPM, operating voltage 6 V. GA46-N20E-0044
zł41.91
4 weeks
No product available!
Small motor with metal gear and encoder, rotation speed 100 RPM, operating voltage 6 V. GA46-N20E-0045
zł38.65
4 weeks
No product available!
Small motor with metal gear and encoder, rotation speed 150 RPM, operating voltage 6 V. GA46-N20E-0046
zł38.90
24h
Available quantity: 2
Available
Small motor with metal gear and encoder, rotation speed 200 RPM, operating voltage 6 V. GA46-N20E-0047
zł38.65
4 weeks
No product available!
The N20E motor with a 50:1 gearbox and encoder is a compact and precise solution for mobile robots, educational projects, and control systems. It provides a good balance between speed and torque with low power consumption and small size.
zł38.65
4 weeks
No product available!
Small motor with metal gear and encoder, rotation speed 500 RPM, operating voltage 6 V. GA46-N20E-0049
zł38.65
4 weeks
No product available!
Small motor with metal gear and encoder, rotation speed 1000 RPM, operating voltage 6 V. GA46-N20E-0050
zł41.77
4 weeks
No product available!
Small motor with metal gear and encoder, rotation speed 2000 RPM, operating voltage 6 V. GA46-N20E-0051
zł41.77
4 weeks
No product available!
A small motor with a metal gear ending with a shaft with M3 thread, rotation speed 30 RPM, operating voltage 6 V. GA1036-N20M-0052
zł28.60
24h
Available quantity: 6
Available
A small motor with a metal gear ending with a shaft with M3 thread, rotation speed 50 RPM, operating voltage 6 V. GA1036-N20M-0053
zł29.82
24h
Available quantity: 1
Available
A small motor with a metal gear ending with a shaft with M3 thread, rotation speed 60 RPM, operating voltage 6 V. GA1036-N20M-0054
zł28.60
24h
Available quantity: 2
Available
A small motor with a metal gear ending with a shaft with M3 thread, rotation speed 100 RPM, operating voltage 6 V. GA1036-N20M-0055
zł28.60
4 weeks
No product available!
A small motor with a metal gear ending with a shaft with M3 thread, rotation speed 200 RPM, operating voltage 6 V. GA1036-N20M-0056
zł28.60
4 weeks
No product available!
A small motor with a metal gear ending with a shaft with M3 thread, rotation speed 300 RPM, operating voltage 6 V. GA1036-N20M-0057
zł35.51
4 weeks
No product available!
DC motor with an offset output shaft gear. Equipped with a magnetic encoder. Waveshare DCGM-3865-12V-EN-240RPM