Motoron M3H256 Triple Motor Controller - 3-channel DC motor driver for Raspberry Pi (self-assembly)
ID: 1179412
5906623413249
zł210.27
Tax included
zł170.95 tax excl.
DC motor driver that allows you to control the movement of three drives using the I2C interface. Connectors for self-assembly. Pololu 5034
Description
DC motor driver dedicated to Raspberry Pi boards. It allows you to control the movement of three drives using the I2C interface. It can work with motors with a supply voltage from 4.5 to 48 V and has a capacity of up to 2 A per motor (continuous operation). The controller has a built-in protection in the event of loss of communication with RPI and the ability to configure the response if an error occurs. The user can set the maximum acceleration and the starting speed of the motor, and the shield construction allows you to connect the drivers with each other. The manufacturer's website includes a user manual and a library with sample programs.
Features
- Wide operating voltage range: 4.5 V to 48 V
- Maximum output current per motor: 2.0 A continuous, 6.4 A peak for <1 second
- Reverse-voltage protection on motor power supply (down to -40 V)
- Logic voltage range: 2.8 V to 5.5 V
- Control interface: I²C
- I²C clock speed: up to 400 kHz
- Optional cyclic redundancy checking (CRC)
- Configurable motion parameters:
- Max acceleration/deceleration forward/reverse
- Starting speed forward/reverse
- Direction change delay forward/reverse
- PWM frequency: eight options available from 1 kHz to 80 kHz
- Command timeout feature stops motors if the Arduino stops functioning
- Configurable automatic error response
- Motor power supply (VIN) voltage measurement
- Optional pins make it easy to power the RPi from reverse-protected motor power, either directly or through an external regulator (not included)
- Two status LEDs
- Motor direction indicator LEDs
Kit contains
- Motoron M3H256 Triple Motor Controller
- 2 x standoff
- 2 x screw and nut
- Connectors set
1179412
Data sheet
- Compatible with
- Raspberry Pi 5/4/3/2/1 A/B, Zero/Zero 2 H/WH
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 1GB RAM LPDDR4, Broadcom VideoCore VI layout.
zł162.90
24h
Available quantity: 66
Available
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
zł220.90
Delivery date unknown
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8 GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł276.75
Delivery date unknown
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł393.90
24h
Available quantity: 41
Available
Other products in the same category (16)
Atmel ATmega32U4 microcontroller comes preloaded with an Arduino-compatible bootloader, and the board includes dual motor drivers that can deliver 1.7 A per channel to two brushed DC motors. Pololu 3119
zł245.34
24h
Available quantity: 1
Available
Adafruit 16-Channel PWM / Servo HAT for Raspberry Pi - Mini Kit (Adafruit 2327)
zł90.38
24h
Available quantity: 3
Available
The module with a 4-channel L293D DC motor driver, designed to work with the Raspberry Pi. It can work with a voltage from 6 to 24 V and a current of up to 600 mA. SB Components 08001
zł78.55
24h
Available quantity: 2
Available
HAT module with a driver for two DC motors designed for Raspberry Pi. Motors can be powered with the voltage from 6.5 to 30 V and draw a maximum current of up to 18 A. Pololu 3751
zł331.50
4 weeks
No product available!
The core of a small robot, either as an auxiliary controller atop a Raspberry Pi base or as a complete control solution on its own. Its Atmel ATmega32U4 microcontroller comes preloaded with an Arduino-compatible bootloader. This version does not include any through-hole components or connectors, allowing for customized assembly or standalone use. Pololu 3118
zł197.60
24h
Available quantity: 2
Available
Dual MAX14870 Motor Driver is a dual DC driver compatible with Raspberry Pi that allows you to control two DC motors with 4.5-36V continuous current of 1.7A. Pololu 3759
zł143.97
24h
Available quantity: 1
Available
The PCA9685 servo driver module is dedicated to Raspberry Pi minicomputers. It allows you to control 16 PWM channels. SB Components 08957
zł83.34
24h
Available quantity: 1
Available
DC motor driver that allows you to control the movement of two drives using the I2C interface. Board with soldered connectors. Pololu 5054
zł635.79
4 weeks
No product available!
Pololu Dual G2 High-Power Motor Driver 24v18 is an extension that allows you to control two DC motors designed for Raspberry Pi. The motors can be supplied with 6.5-36V voltage and can draw a maximum current of 18A. Pololu 3756
zł423.01
4 weeks
No product available!
Adafruit 2348
zł120.00
24h
Available quantity: 3
Available
The Bus Servo Driver HAT (A) with the ESP32-WROOM-32 microcontroller enables simultaneous control of up to 253 ST and RSBL servos, supporting both wired and wireless communication in robotic applications. Designed for integration with Raspberry Pi, it features 5 V power supply from a converter and full support for UART and USB-C transmission. JSON command handling and automatic WiFi network startup allow for remote control and easy integration with various development environments. Ideal for robotic arm projects, walking robots, and other constructions requiring multiple servos with closed-loop control.
zł81.03
24h
Available quantity: 1
Available
DC motor controller that allows the movement of three drives to be controlled via an I2C interface. Pololu 5073
zł107.29
24h
Available quantity: 2
Available
Motor driver module for Raspberry Pi that allows simultaneous control of servos, DC and stepper motors using I2C interface, with additional UART support for external communication. With a built-in DC-DC regulator, it can power Raspberry Pi with up to 3A current, while its stackable design and spare DIP headers for camera and display increase design flexibility. The module is ideal for robotic projects, offering independent power supply for servos, adjustable PWM, and additional features such as buzzer and IR receiver. DFRobot DRI0054
zł131.46
4 weeks
No product available!
Pololu Dual G2 High-Power Motor Driver 18v22 is an extension that allows you to control two DC motors designed for Raspberry Pi. The motors can be powered with 6.5-30V and draw up a maximum current of 22A. Pololu 3754
zł605.05
4 weeks
No product available!
DC motor driver that allows you to control the movement of two drives using the I2C interface. Board without connectors. Pololu 5059
zł411.99
4 weeks
No product available!
DC motor driver that allows you to control the movement of two drives using the I2C interface. Board with soldered connectors. Pololu 5051
zł354.03
4 weeks
No product available!
DC motor driver that allows you to control the movement of three drives using the I2C interface. Connectors for self-assembly. Pololu 5034