

zł112.90 tax excl.
DC motor controller that allows the movement of three drives to be controlled via an I2C interface. Kit with connectors for self-assembly. Pololu 5072
DC motor driver dedicated to Raspberry Pi boards. It allows you to control the movement of three drives using the I2C interface. It can work with motors with a supply voltage from 1.8 to 22 V and has a capacity of up to 1.7 A per motor (continuous operation). The controller has a built-in protection in the event of loss of communication with RPI and the ability to configure the response if an error occurs. The user can set the maximum acceleration and the starting speed of the motor, and the shield construction allows you to connect the drivers with each other. The manufacturer's website includes a user manual and a library with sample programs.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.5GHz, 1GB RAM LPDDR4, Broadcom VideoCore VI layout.
No product available!
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.5GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
No product available!
DC motor driver that allows you to control the movement of two drives using the I2C interface. Board with soldered connectors. Pololu 5054
No product available!
PCA9685 servo controller module dedicated to Raspberry Pi minicomputers. Allows control of 16 PWM channels. Waveshare Servo Driver HAT (B)
No product available!
Adafruit 16-Channel PWM / Servo HAT for Raspberry Pi - Mini Kit (Adafruit 2327)
HAT with two-channel DC motor driver for Raspberry Pi. It has an operating voltage from 6 to 24 V and a continuous current of up to 10 A. It can be controlled by a PWM signal or by means of built-in buttons. Cytron HAT-MDD10
Extension module with a driver for two stepper motors based on the HR8825 system. Dedicated for Raspberry Pi minicomputers. Waveshare Stepper Motor HAT (B)
No product available!
The official extension module (HAT) dedicated to the Raspberry Pi. It allows you to control LEGO SPIKE Prime motors and service LEGO sensors. Raspberry Pi SC0622
The module with a 4-channel L293D DC motor driver, designed to work with the Raspberry Pi. It can work with a voltage from 6 to 24 V and a current of up to 600 mA. SB Components 08001
No product available!
HAT module with a driver for two DC motors designed for Raspberry Pi. Motors can be powered with the voltage from 6.5 to 30 V and draw a maximum current of up to 18 A. Pololu 3751
No product available!
Raspberry Pi Expansion Board, DC Motor / Stepper Motor Driver
DC motor driver that allows you to control the movement of two drives using the I2C interface. Board without connectors. Pololu 5053
No product available!
DC motor driver that allows you to control the movement of two drives using the I2C interface. Board without connectors. Pololu 5056
No product available!
This programmable module combines with a Raspberry Pi to serve as the control center of a small robot or electronics project. Its Atmel ATmega32U4 microcontroller comes preloaded with an Arduino-compatible bootloader, and the board includes dual motor drivers that can deliver 1.8 A per channel to two brushed DC motors.
Motor driver module for Raspberry Pi that allows simultaneous control of servos, DC and stepper motors using I2C interface, with additional UART support for external communication. With a built-in DC-DC regulator, it can power Raspberry Pi with up to 3A current, while its stackable design and spare DIP headers for camera and display increase design flexibility. The module is ideal for robotic projects, offering independent power supply for servos, adjustable PWM, and additional features such as buzzer and IR receiver. DFRobot DRI0054
This compact expansion board plugs directly into the GPIO header on a Raspberry Pi B+, A+, or Pi 2 and provides an easy and low-cost solution for driving a pair of small brushed DC motors. Pololu 2753
DC motor driver that allows you to control the movement of two drives using the I2C interface. Board without connectors. Pololu 5050
No product available!
DC motor driver that allows you to control the movement of three drives using the I2C interface. Pololu 5035
DC motor controller that allows the movement of three drives to be controlled via an I2C interface. Kit with connectors for self-assembly. Pololu 5072