New products
New products New products
zł1,093.22
4 weeks
ESP32-C3 module with 0.42" OLED display
ID: 1196909
5902186332720
zł49.90
Tax included
zł40.57 tax excl.
Development module with an ESP32-C3 microcontroller and an integrated 0.42" OLED display, intended for IoT, automation, and embedded systems projects, with Wi-Fi and Bluetooth LE support. modESP32C3withOLED
Description
The modESP32C3withOLED module is used as a compact hardware platform for projects based on the ESP32-C3 microcontroller with a 32-bit RISC-V architecture. The device supports 2.4 GHz Wi-Fi and Bluetooth Low Energy 5.0 connectivity, enabling use in IoT systems, home automation, and portable devices.
The board integrates a 0.42" OLED display for presenting data, system messages, or operating parameters. The module is equipped with a built-in ceramic antenna, a USB Type-C interface for power supply and programming, as well as RESET and BOOT (Download) buttons. The design provides access to communication interfaces and GPIO pins, allowing connection of sensors, peripheral modules, and actuators.
An optimized power supply system supports low-power operating modes, enabling use in battery-powered projects. The module is applied in prototyping, education, and small-scale smart device development.
Features
- Product type: development module with microcontroller
- Microcontroller: ESP32-C3
- CPU architecture: 32-bit RISC-V
- Wireless connectivity: Wi-Fi 2.4 GHz, Bluetooth LE 5.0
- Wi-Fi standard: 802.11 b/g/n
- Display: OLED
- Display diagonal: 0.42"
- Antenna: built-in ceramic
- Flash memory: 4 MB
- Power supply: 3.3 – 6 V
- USB interface: USB Type-C
- Communication interfaces:
- I2C: 1
- SPI: 1
- UART: 2
- GPIO: 11 (with PWM support)
- ADC: 4 channels
- LED: blue, GPIO8
- BOOT (BO0) button: programming mode entry
- RESET button: system reset
- Low-power modes: supported
- Board dimensions: 24.8 x 20.45 mm
Kit includes
- 1× modESP32C3withOLED module
- 1× set of pin headers (2 strips)
1196909
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
Versatile communication module based on the ESP32 microcontroller, designed for industrial automation and as an IoT gateway for PLCs. It supports fieldbus standards such as CAN and RS485, as well as wireless technologies Wi-Fi, BLE and 4G LTE, which enables integration with industrial networks and the cloud. Thanks to its rugged design and support for programming in ESP-IDF, the EdgeBox-ESP-100 is suitable for remote control and monitoring in harsh industrial environments. Seeed Studio 102991735
zł689.00
24h
Available quantity: 1
Available
Small AI development board based on ESP32-S3 SoC with integrated WiFi 802.11 b/g/n and BLE transceiver. It has a built-in 2 MP camera, LCD display and microphone. Espressif ESP32-S3-EYE
zł288.99
24h
Available quantity: 2
Available
Espressif ESP32-S2 WiFi chip module. It integrates a TFT LCD display, SPI Flash memory, LiPo charging circuit and RGB LED. It is equipped with a STEMMA QT connector. Adafruit 53
zł129.49
24h
Available quantity: 2
Available
Multi-protocol module, SMD module ESP32-S3R8 with built-in 8 MB Octal PSRAM, 16 MB Quad SPI flash, and IPEX antenna connector.
zł29.90
24h
Available quantity: 2
Available
Espressif ESP32-S3 WiFi and BLE module board. It offers 8 MB of flash memory and 8 MB of SRAM. It is equipped with a USB type C connector and a WiFi/BT antenna. Seeed Studio 113991114
zł36.22
24h
Available quantity: 95
Available
The Espressif ESP32-S3-WROOM-1 WiFi and Bluetooth LE module board offers 8 MB Flash memory and 8 MB PSRAM. The pinouts are compatible with the ESP32-S3-DevKitC-1 modules.Waveshare ESP32-S3-DEV-KIT-N8R8-M
zł49.47
24h
Available quantity: 9
Available
The Espressif ESP32-S3-WROOM-1 WiFi and Bluetooth LE module board offers 8 MB Flash memory and 8 MB PSRAM. The pinouts are compatible with the ESP32-S3-DevKitC-1 modules.Waveshare ESP32-S3-DEV-KIT-N8R8
zł50.45
24h
Available quantity: 10
Available
Starter kit with 15 modules useful for learning (button, LED, display, sensors, etc.) and ESP32-S3-Pico-M board. Ideal for starting your electronics and programming adventure. Waveshare ESP32-S3-Pico-Sensor-Kit-B
zł201.25
24h
Available quantity: 5
Available
Espressif ESP32-S3 WiFi and Bluetooth LE module board. It offers 16 MB of flash memory and 2 MB of SRAM. The pinouts are compatible with the HAT modules for the Raspberry Pi Pico. Waveshare ESP32-S3-Pico-M
zł43.60
4 weeks
No product available!
Espressif ESP32-S3 WiFi and Bluetooth LE module board. It offers 16 MB of flash memory and 2 MB of SRAM. The pinouts are compatible with the HAT modules for the Raspberry Pi Pico. Waveshare ESP32-S3-Pico
zł36.69
24h
Available quantity: 10
Available
Espressif ESP32-S3 WiFi and BLE chip module with 1.14" TFT LCD display. It integrates a LiPo charging circuit and an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5691
zł133.89
24h
Available quantity: 3
Available
Development board based on Bluetooth Low Energy and IEEE 802.15.4 ESP32-H2-MINI-1 module. The ESP32-H2-MINI-1 integrates a 2.4GHz transceiver compliant with Bluetooth Low Energy and IEEE 802.15.4 technologies, supporting Bluetooth 5 (LE), Bluetooth Mesh, Thread, Matter, and Zigbee. Espressif Systems ESP32-H2-DevKitM-1-N4
zł59.90
24h
Available quantity: 4
Available
Module with a 4-inch touch display that uses two MCU systems (ESP32-S3 and RP2040) and supports Wi-Fi and BLE communication. The board is equipped with USB Type C, I2C (Grove) and analog inputs interfaces and can easily connect to other peripheral devices. Seeed Studio 114993068
zł227.82
24h
Available quantity: 2
Available
Module with a 4-inch touch display that uses two MCU systems (ESP32-S3 and RP2040) and supports Wi-Fi and BLE communication. The board is equipped with USB Type C, I2C (Grove) and analog inputs interfaces and can easily connect to other peripheral devices. Seeed Studio 114993069
zł407.82
24h
Available quantity: 2
Available
Module with a 4-inch touch display that uses two MCU systems (ESP32-S3 and RP2040) and supports Wi-Fi, BLE and LoRa communication. The board is equipped with USB Type C, I2C (Grove) and analog inputs interfaces and can easily connect to other peripheral devices. Seeed Studio 114993070
zł269.80
24h
Available quantity: 2
Available
Module with a 4-inch touch display that uses two MCU systems (ESP32-S3 and RP2040) and supports Wi-Fi, BLE and LoRa communication. The board is equipped with USB Type C, I2C (Grove) and analog inputs interfaces and can easily connect to other peripheral devices using a rich set of GPIOs. Seeed Studio 114993071
zł415.00
24h
Available quantity: 1
Available
Development module with an ESP32-C3 microcontroller and an integrated 0.42" OLED display, intended for IoT, automation, and embedded systems projects, with Wi-Fi and Bluetooth LE support. modESP32C3withOLED