ESP32-S3 development board with 1.3″ display 240×240 and enclosure - Waveshare 29962
ID: 1197651
5902186307506
zł77.08
Tax included
zł62.67 tax excl.
ESP32-S3-LCD-1.3-B is a compact development module with a 1.3" color IPS screen, Wi-Fi and Bluetooth communication, motion sensors, and a plastic enclosure, designed for graphic projects, interactive mobile applications, wearable electronics prototypes, and data acquisition systems. With SPI support and hardware display rotation, it enables flexible implementation in projects requiring color graphics display.
Description
Module based on the ESP32-S3R8 microcontroller with a dual-core Xtensa LX7 processor clocked up to 240 MHz. Equipped with a 1.3-inch color IPS display with a resolution of 240×240 pixels, controlled by the ST7789V2 driver via SPI interface. The device integrates 8 MB of PSRAM, 16 MB of Flash memory, and 2.4 GHz Wi-Fi and Bluetooth 5 LE communication modules.
It includes a QMI8658 IMU sensor (3-axis accelerometer and 3-axis gyroscope), a TF card slot, a 3.7 V lithium battery charging management system, and a 13-pin GPIO connector (2.54 mm). Its compact design enclosed in a lightweight plastic case allows for convenient integration with end-user devices.
It supports 90° hardware display rotation, allowing flexible use of the screen in different orientations.
Features
- ESP32-S3R8 with dual-core Xtensa 32-bit LX7 processor up to 240 MHz
- Support for 2.4 GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 LE
- 16 MB Flash, 8 MB PSRAM, 512 kB SRAM, 384 kB ROM
- 1.3" IPS display, 240×240 px, 262K colors
- ST7789V2 controller, SPI interface, 90° hardware rotation support
- QMI8658 IMU sensor (3-axis accelerometer and 3-axis gyroscope)
- TF card slot, charge indicator, MX1.25 battery connector
- Battery charging management with PL4054, voltage regulator ME6217C33M5G
- 13PIN GPIO connector (2.54 mm) for connecting peripherals
- Plastic enclosure
1197651
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
ESP32-H2-Zero-M is a ready-to-use board with pre-soldered connectors, equipped with the ESP32-H2FH4S microcontroller and support for BLE, Zigbee and Thread. Designed for rapid prototyping in wireless communication systems, automation and IoT devices.
zł19.56
6 weeks
No product available!
A compact development board that uses the ESP32-PICO-MINI-N8R2 chip with 2 MB PSRAM. It provides wireless communication via Bluetooth, BLE and WiFi. It has a built-in PCB antenna and a Qwiic connector for easy connection of additional modules and sensors. SparkFun DEV-23386
zł55.01
3 weeks
No product available!
A small USB-UART TTL converter module based on the CH340 system with a USB type A connector. Designed for the ESP-01 and ESP-01S modules
zł5.73
24h
Available quantity: 4
Available
Board with the WiFi Espressif ESP32-S2 module. Offers 4MB Flash and 8MB SRAM. Leads are compatible with HAT modules for Raspberry Pi Pico. Waveshare ESP32-S2-Pico-M
zł52.45
24h
Available quantity: 9
Available
Espressif ESP32-S3 WiFi and Bluetooth LE module board. It offers 16 MB of flash memory and 2 MB of SRAM. The pinouts are compatible with the HAT modules for the Raspberry Pi Pico. Waveshare ESP32-S3-Pico
zł36.69
24h
Available quantity: 22
Available
ESP32-S3-Touch-LCD-3.5B-C is a complete development system with an IPS display, camera, and wireless connectivity, designed for interactive applications involving voice, image, and touch. Intended for advanced IoT projects, smart terminals, control panels, and offline AI applications.
zł216.20
24h
Available quantity: 1
Available
A development board based on a dual-core RISC-V 400 MHz processor, supporting AI instructions, MIPI-CSI/DSI interfaces, and enabling image and voice processing. With an integrated ESP32-C6 module, it offers Wi-Fi 6 and Bluetooth 5 connectivity, as well as a USB OTG interface, microphone, TF slot, and 32 MB PSRAM for advanced IoT and AI applications. Its compact size and rich features make it ideal for smart cameras, interactive displays, and robotics. DFRobot DFR1172
zł60.26
4 weeks
No product available!
ESP32-S3-LCD-1.3-C is an advanced evaluation board featuring a 1.3-inch LCD screen, integrated IMU, and Wi-Fi and Bluetooth connectivity, designed for use in interactive systems and IoT devices. Thanks to its enclosure and prismatic cube, it offers an impressive graphical display. High performance, a rich set of peripherals, and compact size make the board ideal for prototyping user interfaces, wearable devices, electronic toys, and control systems.
zł123.58
24h
Available quantity: 3
Available
Espressif ESP32-C3FH4 WiFi module board with RISC-V core. It offers 4 MB Flash memory and 400 kB SRAM and an RGB LED. It has a built-in ceramic WiFi/BLE antenna. Waveshare ESP32-C3-Zero
zł17.90
24h
Available quantity: 9
Available
Module with WiFi Espressif ESP32-S2. It integrates two 3.3 V stabilizers, SPI Flash memory, LiPo charging circuit, light sensor and RGB diode. It is equipped with a STEMMA QT connector. Adafruit 4769
zł183.63
24h
Available quantity: 1
Available
M5Stack series development kit equipped with ESP32 Pico. It will work in IoT-related projects or in "wearable" devices. M5Stack C008
zł47.90
24h
Available quantity: 5
Available
Development kit with an ESP32 module featuring a 1.28-inch round display. Offers Wi-Fi and Bluetooth 5.0 communication. Perfect for IoT projects with a simple GUI. Espressif ESP32-C3-LCDkit
zł107.13
24h
Available quantity: 1
Available
Module with 9-axis IMU LSM9DS1 system dedicated to ESP Thing board. Equipped with a connector for connecting GPS and a microSD slot. SparkFun DEV-14430
zł117.93
24h
Available quantity: 2
Available
ESP32-C6-LCD-1.9 is a compact and energy-efficient development board with a 1.9" color LCD display, support for Wi-Fi 6 and Bluetooth 5, designed for HMI projects, mobile systems, and IoT devices. The version without a touch panel allows for rapid implementation of graphical user interfaces while maintaining a simplified hardware design. Thanks to full compatibility with the Raspberry Pi Pico pinout, it enables easy expansion with additional modules and functions.
zł71.13
24h
Available quantity: 2
Available
The ESP32-S3 A7670E 4G development board combines the ESP32-S3R2 microcontroller with the A7670E module, offering global LTE Cat-1, 2G, Wi-Fi, Bluetooth, and GNSS connectivity for advanced IoT applications. With support for lithium batteries and solar panels, as well as a built-in OV2640 camera, the board is ideal for remote monitoring projects, smart homes, and low-power applications.. Waveshare ESP32-S3-A7670E-4G-EN
zł194.86
24h
Available quantity: 4
Available
Module with a 4-inch touch display that uses two MCU systems (ESP32-S3 and RP2040) and supports Wi-Fi, BLE and LoRa communication. The board is equipped with USB Type C, I2C (Grove) and analog inputs interfaces and can easily connect to other peripheral devices using a rich set of GPIOs. Seeed Studio 114993071
zł415.00
24h
Available quantity: 2
Available
ESP32-S3-LCD-1.3-B is a compact development module with a 1.3" color IPS screen, Wi-Fi and Bluetooth communication, motion sensors, and a plastic enclosure, designed for graphic projects, interactive mobile applications, wearable electronics prototypes, and data acquisition systems. With SPI support and hardware display rotation, it enables flexible implementation in projects requiring color graphics display.