- New
OMGS3 - development board with ESP32-S3 module (3D antenna)
ID: 1201000
zł103.97
Tax included
zł84.53 tax excl.
This ESP32-S3-based development board combines high processing power with energy efficiency and rich functionality. Equipped with a dual-core Xtensa LX7 processor (240 MHz), a RISC-V coprocessor, 8 MB of Flash, and 2 MB of PSRAM, it ensures smooth operation even in advanced IoT projects. The module supports 2.4 GHz Wi-Fi and Bluetooth 5.0 + Mesh, and thanks to the built-in LiPo charging circuit and battery monitoring, it can operate for extended periods in low-power mode. OMGS3
Description
OMGS3 is a development board based on the ESP32-S3 chip, designed for designers, engineers, and electronics enthusiasts who need extensive capabilities in an ultra-small form factor. Despite its compact size, it offers full support for Wi-Fi 2.4 GHz (802.11b/g/n) and Bluetooth 5.0 + Mesh, making it an ideal solution for IoT applications, smart systems, and modern mobile devices.
The board features a dual-core Xtensa LX7 processor running up to 240 MHz, supported by a RISC-V Ultra Low Power Co-processor that ensures extremely low power consumption in sleep modes. With built-in 8 MB QSPI Flash memory and 2 MB PSRAM, OMGS3 provides generous data storage and smooth performance even for complex applications. The board includes an RGB LED for visual status indication. OMGS3 supports LiPo battery power and is equipped with a charging circuit and an I2C Battery Fuel Gauge for energy level monitoring. Thanks to its 3.3 V 700 mA voltage regulator, the module maintains stable operation even under high load conditions.
The board also offers a built-in USB interface and D+/D− pins for connecting an external USB connector. Its compact dimensions and the option for surface-mount (SMT) installation or direct wire soldering make OMGS3 perfect for space-constrained projects where every millimeter matters. The integrated 3D High Gain antenna ensures excellent range and stable wireless connections. With 17 GPIO pins and full support for development environments such as Arduino, ESP-IDF, and MicroPython, OMGS3 delivers an ideal combination of power, flexibility, and miniaturization. It is perfectly suited for IoT, robotics, and smart sensor projects, as well as for any application where energy efficiency and compact design are essential. Thanks to its ultra-low-power operation mode, the module can run for long periods on battery power, making it an excellent solution for mobile and autonomous devices.
Features
- Processor: Dual 32-bit Xtensa LX7 @ up to 240 MHz
- Coprocessor: RISC-V Ultra Low Power
- Flash memory: 8 MB QSPI
- PSRAM: 2 MB QSPI
- Connectivity: Wi-Fi 2.4 GHz (802.11b/g/n), Bluetooth 5.0 + Mesh
- Regulator: 3.3 V / 700 mA LDO
- Sleep mode support
- LED: RGB indicator
- Power supply: LiPo battery with charging circuit
- Battery monitoring: I2C Battery Fuel Gauge
- USB interface: Native USB + USB Serial JTAG
- Pins: D+/D− for external USB connector
- Antenna: 3D High Gain
- Number of GPIOs: 17
- Dimensions: 25 mm × 10 mm
1201000
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
This compact development board, featuring the ESP32-S3 module, offers high performance thanks to the Xtensa LX7 dual-core processor and a RISC-V coprocessor. Equipped with 8MB of Flash, 8MB of PSRAM, and 27 GPIO pins, it\'s ideal for IoT, AI, and memory-intensive applications. The module supports 2.4GHz Wi-Fi, Bluetooth 5.0 with Mesh, and a native USB interface with OTG and JTAG support for easy programming and debugging.
zł101.30
24h
Available quantity: 1
Available
This compact development board, featuring the ESP32-S3 module, offers high performance thanks to the Xtensa LX7 dual-core processor and a RISC-V coprocessor. Equipped with 8MB of Flash, 8MB of PSRAM, and 27 GPIO pins, it\'s ideal for IoT, AI, and memory-intensive applications. The module supports 2.4GHz Wi-Fi, Bluetooth 5.0 with Mesh, and a native USB interface with OTG and JTAG support for easy programming and debugging.
zł101.30
24h
Available quantity: 1
Available
Other products in the same category (16)
This development kit features the ESP32-C3-MINI-1 module and a 1.28-inch 240x240 color LCD display with a GC9A01 controller. It allows you to create interactive projects using a rotary encoder, built-in speaker, and infrared transmitter and receiver. The kit supports the LVGL library for building graphical user interfaces and wireless Wi-Fi and Bluetooth connectivity.
zł109.37
24h
Available quantity: 2
Available
Crowtail – ESP8266 NodeMCU 2.0 is a universal WiFi module for IoT projects with a ready Crowtail interface, microUSB port, and Li-Po battery charging function. It works well in mobile and stationary applications based on Arduino IDE or NodeMCU Lua.
zł45.15
24h
Available quantity: 4
Available
This compact development board features Wi-Fi 6, Bluetooth 5 LE, and 802.15.4, ideal for Zigbee and Matter-based IoT projects. It offers numerous GPIOs, onboard LiPo charging, and battery monitoring thanks to the MAX17048 chip. It includes a NeoPixel LED and a STEMMA QT port for quick sensor connection. Its energy-efficient design, with a deep sleep mode of approximately 17µA, is ideal for battery-powered applications. Adafruit 5933
zł76.06
24h
Available quantity: 3
Available
A compact development board with a built-in 1.14" IPS display, ideal for user interfaces, IoT projects, and case-mounted devices. Featuring the ESP32-S3 with Wi-Fi, Bluetooth LE, and native USB, it offers 4MB of Flash and 2MB of PSRAM to support more advanced graphics and networking applications. Three user buttons, a STEMMA QT connector, and an integrated LiPo charger provide convenient prototyping and expansion capabilities. Adafruit 6303
zł125.84
24h
Available quantity: 1
Available
ESP32-based development kit with a 2" IPS display, 16MB Flash memory, Li-Po battery, integrated speaker, and exposed IO interfaces. M5Stack K001-V27
zł210.33
24h
Available quantity: 2
Available
Core board from Waveshare based on a dual-chip ESP32-P4 and ESP32-C6 design, supporting 2.4GHz Wi-Fi and Bluetooth 5.3, equipped with 32MB Flash and 32MB PSRAM. Waveshare 32604
zł54.60
6 weeks
No product available!
Development board based on the ESP32-C6 microcontroller, featuring a 1.83 inch IPS touch display with 240 x 284 resolution, WiFi 6 and Bluetooth 5 connectivity, onboard audio codec, microphones, and speaker, designed for IoT projects and wearable applications. Waveshare ESP32-C6-Touch-LCD-1.83-EN
zł93.50
6 weeks
No product available!
Development board based on the ESP32-C6 microcontroller, featuring a 1.83 inch IPS touch display with a resolution of 240 x 284, WiFi 6 and Bluetooth 5 interfaces, onboard audio codec, microphones, speaker, and a 3.7 V lithium battery, designed for IoT projects and wearable applications. Waveshare ESP32-C6-Touch-LCD-1.83
zł98.22
6 weeks
No product available!
ESP32 development board with a 3.5inch capacitive IPS touch display 320x480, onboard audio codec, microphone and speaker, supporting Wi-Fi and BLE. ESP32-Touch-LCD-3.5-EN Waveshare 32871
zł122.73
6 weeks
No product available!
ESP32 development board with a 3.5inch capacitive IPS touch display 320x480, onboard audio codec, microphone and speaker, supporting Wi-Fi and BLE, supplied with a lithium battery. ESP32-Touch-LCD-3.5 Waveshare 32870
zł130.66
6 weeks
No product available!
Development board based on the ESP32-C5 microcontroller with a 240MHz RISC-V processor, supporting dual-band Wi-Fi 6 (2.4GHz and 5GHz), Bluetooth LE, Zigbee, and Thread, equipped with 16MB Flash and 8MB PSRAM, designed for IoT applications and multi-protocol gateways. Waveshare ESP32-C5-WIFI6-KIT-N16R8
zł47.66
6 weeks
No product available!
The ESP32-P4-WIFI6-POE-ETH-D is an advanced Waveshare development board based on the ESP32-P4 and ESP32-C6 microcontrollers, designed for HMI applications, edge computing, multimedia processing, and industrial systems. It supports Wi-Fi 6, Bluetooth 5 LE, 100 Mbps Ethernet with PoE power supply, and a rich set of video, audio, and I/O interfaces. ESP32-P4-WIFI6-POE-ETH-D
zł373.90
6 weeks
No product available!
ESP32-P4-WIFI6-POE-ETH-C is a high-performance Waveshare development board based on the ESP32-P4 and ESP32-C6 microcontrollers, designed for advanced HMI, edge computing, multimedia, and networked systems. It supports Wi-Fi 6, Bluetooth 5 LE, 100 Mbps Ethernet with PoE, and a rich set of video, audio, and I/O interfaces. ESP32-P4-WIFI6-POE-ETH-C
zł168.14
24h
Available quantity: 1
Available
ESP32-P4-WIFI6-POE-ETH is a high-performance Waveshare development board based on the ESP32-P4 and ESP32-C6 microcontrollers, designed for advanced HMI, edge computing, multimedia, industrial automation, and networked systems. It supports Wi-Fi 6, Bluetooth 5 LE, 100 Mbps Ethernet with PoE, and a rich set of I/O and multimedia interfaces. ESP32-P4-WIFI6-POE-ETH
zł113.32
6 weeks
No product available!
ESP32-S3 development board featuring a dual-core 240MHz processor, 2.4GHz Wi-Fi connectivity, 32MB Flash and 16MB PSRAM, supplied in a version with factory pre-soldered pin headers, designed for AIoT and embedded system projects. Waveshare ESP32-S3-DEV-KIT-N32R16V-M
zł75.45
6 weeks
No product available!
Development board based on the ESP32-S3-WROOM module with a dual-core 240 MHz processor, 32 MB Flash and 16 MB PSRAM, supporting 2.4 GHz Wi-Fi and Bluetooth LE, designed for IoT and AIoT projects. Waveshare ESP32-S3-DEV-KIT-N32R16V
zł68.01
6 weeks
No product available!
This ESP32-S3-based development board combines high processing power with energy efficiency and rich functionality. Equipped with a dual-core Xtensa LX7 processor (240 MHz), a RISC-V coprocessor, 8 MB of Flash, and 2 MB of PSRAM, it ensures smooth operation even in advanced IoT projects. The module supports 2.4 GHz Wi-Fi and Bluetooth 5.0 + Mesh, and thanks to the built-in LiPo charging circuit and battery monitoring, it can operate for extended periods in low-power mode. OMGS3