ESP32-C3-LCD Kit - development board with ESP32-C3 module and 1.28" LCD display

ESP32-P4-WIFI6-Touch-LCD-4C board with a 4″ round AMOLED display, 10-point touch support, Wi-Fi 6, Bluetooth 5, and hardware security features, designed for advanced embedded applications, HMI systems, voice-enabled devices, and smart interfaces.

Espressif ESP32-C6 WiFi module board with RISC-V core. It offers 4 MB Flash and 512 KB SRAM and RGB diode. It has a built-in ceramic WiFi/BLE antenna. Waveshare ESP32-C6-Zero

Module with WiFi and Bluetooth Espressif ESP32 WROOM. It integrates a set of peripheral devices - capacitive touch sensors, Hall sensors, SD card interface, Ethernet, fast SPI, UART, I2S and I2C. SparkFun WRL-15663

The low-power consumption micro-controller intentionally designed for Internet of Things (IoT) projects. The board integrates a Dual-Core ESP-WROOM-32 module, which supports MCU and Wi-Fi &Bluetooth dual-mode communication. DFR0478

Beetle ESP32 is a small (35 × 34mm) board thanks to which the creation of the Internet of Things (IoT) is very simple. The module was based on the ESP32 system, which allows for Bluetooth communication (compatible with Bluetooth 4.2) and WiFi. DFRrobot DFR0575

A complete touch user interface development platform with Wi-Fi, Bluetooth 5, a motion sensor, and an AMOLED display. Ideal for HMI applications, LVGL GUI prototyping, and battery-powered mobile and IoT projects. Waveshare ESP32-S3-Touch-AMOLED-1.91-M

Board for applications in the area of the Internet of Things (IoT). The module is based on the ESP-WROOM-32E system with 240 MHz clock, equipped with 4 MB Flash and 520 KB SRAM, as well as WiFi and Bluetooth communication. DFrobot DFR0654-F

This 32-bit RISC-V development board, running at up to 160 MHz, is designed for AIoT and human-computer interface applications. Featuring a 1.43-inch, 466x466-pixel AMOLED display and an FT6146 touch controller, it delivers detailed graphics and interactive experiences. The board features Wi-Fi 6, Bluetooth 5, and Zigbee/Thread connectivity, dual digital microphones, audio playback and recording, and the ability to connect a lithium battery or power via USB-C. ESP32-C6-Touch-AMOLED-1.43

Module with WiFi Espressif ESP32-S2. It integrates two regulators, SPI Flash memory, LiPo charging circuit and RGB diode. It is equipped with a STEMMA QT connector. Adafruit 4775

ESP32-S3-Touch-AMOLED-2.06 is a complete development platform for designing wearable devices with an AMOLED display, touch control, audio, wireless connectivity, and AI features. Thanks to its compact design and built-in battery, it is suitable as a foundation for smartwatches, data loggers, and IoT devices.

Espressif ESP32-C3 WiFi module board. It offers 4 MB of Flash memory and 400 kB of SRAM, as well as an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5700

Board with WiFi and Bluetooth Espressif ESP32-C3 module. It offers 4MB Flash and 400KB SRAM and a LiPo charging circuit. The set includes an expansion board with a display connector. DFRobot DFR0868

ESP32-S3-Touch-LCD-1.9 is an advanced development board with a 1.9" touch screen, based on the ESP32-S3R8 microcontroller, offering a rich set of communication and sensor features. Intended for HMI projects, motion monitoring, and interactive applications, it is well-suited for solutions requiring a compact display and precise touch control. Thanks to compatibility with Raspberry Pi Pico and support for ESP-IDF and Arduino IDE, it enables rapid development of advanced IoT systems.

The KAmod ESP32 POW+RS485 board equipped with the ESP32-WROOM32D 4MB (32Mb) module supports 2.4 GHz Wi-Fi, RS485 communication, also has a USB-UART converter, an efficient power supply system and a 40-pin connector compatible with Raspberry Pi, making it an ideal solution for home and industrial automation

Evaluation board with the ESP32-S2-SOLO-U-N4R2 module enables the development of 2.4 GHz wireless Wi-Fi applications, offering integrated Flash and PSRAM memory as well as the option to use an external antenna. Thanks to a wide range of interfaces and a high number of available GPIOs, it is suitable for IoT projects, building automation, remote control systems, as well as wearable devices and distributed measurement systems.

The ESP32-S3-LCD-Driver-Board is a comprehensive solution for projects requiring advanced LCD display control and wireless connectivity. Its large memory and high processing power enable the execution of complex graphical interfaces, while the rich set of interfaces offers flexibility in designing IoT applications, control panels, HMI systems, and wearable devices.