ESP32-S3 development board with 2.8″ display 240×320 - Waveshare 30223

Espressif ESP32-C6 WiFi module board with RISC-V core. It offers 4 MB Flash and 512 KB SRAM and RGB diode. It has a built-in ceramic WiFi/BLE antenna. Waveshare ESP32-C6-Zero

Module with WiFi and Bluetooth Espressif ESP32 WROOM. It integrates a set of peripherals - capacitive touch sensors, Hall sensors, SD card interface, Ethernet, SPI, UART, I2S and I2C. SparkFun WRL-20168

ESP-PROG is an advanced tool for programming and debugging Espressif microcontrollers such as ESP32, ESP32-C3, ESP32-S2, ESP32-S3 and ESP8266. With the built-in FT2232HL USB bridge, ESP-PROG converts the USB 2.0 interface to serial and parallel interfaces, offering functions of automatic firmware download, serial communication and online debugging via JTAG

The ESP32-C6-LCD-1.47 development board with a 1.47" display is a high-performance solution for projects based on the ESP32-C6, offering support for Wi-Fi 6 and Bluetooth 5 LE. With its compact design, GPIO expansion, TF card slot, and visually appealing enclosure with an RGB LED, the module is suitable for AIoT projects, user interfaces, and systems requiring low power consumption and wireless communication.

The KAmod ESP32-C3 board, equipped with a RISC-V microcontroller and a set of MEMS and SHTC3 sensors, enables the creation of IoT, measurement, and control applications. Thanks to power from USB-C or a battery and support for Arduino and Rust, it works perfectly in mobile projects and embedded systems.

Module with WiFi and BLE Espressif ESP32-S3. It integrates a LiPo charging circuit and an RGB diode. Equipped with a STEMMA QT connector. Adafruit 5401

ESP32-S3-POE-ETH enables the development of advanced projects with remote power supply and data transfer capabilities. This solution is especially useful in industrial installations, IP monitoring, control systems, and applications based on ESP32 and the Raspberry Pi ecosystem.

Development board based on a microcontroller with a RISC-V core. It offers support for WiFi 6, Bluetooth 5 and Zigbee 3.0 and Thread (IEEE 802.15.4) protocols. Uses the ESP32-C6-WROOM-1 module and two USB Type C connectors. ESP32-C6-DEVKITC-1-N8

Advanced module with a 32-bit, single-core RISC-V processor. It has a built-in Bluetooth LE 5 and IEEE 802.15.4 (Thread, Zigbee 3.0) module. Perfect solution for IoT (Internet of Things) projects. Version with connectors for selfassembly. Waveshare ESP32-H2-DEV-KIT-N4

ESP32-S3-USB-OTG board with Wi-Fi, BLE, and USB-OTG for creating modern IoT projects and USB devices. Espressif ESP32-S3-USB-OTG

ESP32-C6-DEV-KIT-N16 is a versatile development board with support for Wi-Fi 6, Bluetooth 5, and Zigbee/Thread, based on the ESP32-C6 microcontroller with 16 MB of Flash memory. The version without soldered pin headers allows flexible integration in projects with non-standard mounting requirements, while still providing full functionality and a rich set of interfaces for IoT applications, automation, and embedded systems.

ESP32-S3-Touch-LCD-4B is a ready-to-install development board with ESP32-S3 and a 4" touch screen, intended for use in building automation, HMI systems and voice interfaces. The compact 86×86 mm format facilitates integration in wall enclosures and control panels.

Development board with ESP32 module (WiFi + Bluetooth). Equipped with a 40-pin connector compatible with Raspberry Pi HAT. Waveshare ESP32 One

ESP32-S3-Touch-LCD-1.47 is a compact development board with an IPS display and ESP32-S3 microcontroller, equipped with Wi-Fi and Bluetooth as well as Flash and PSRAM memory. The version without pre-soldered pin headers allows flexible integration into IoT and HMI projects, ensuring smooth handling of graphical interfaces and wireless communication.

ESP32-S3-Touch-LCD-3.5B-C is a complete development system with an IPS display, camera, and wireless connectivity, designed for interactive applications involving voice, image, and touch. Intended for advanced IoT projects, smart terminals, control panels, and offline AI applications.

The ESP32-S3FH4R2 development board is based on the Xtensa 32-bit LX7 dual-core processor. It offers comprehensive wireless connectivity, including 2.4GHz Wi-Fi and Bluetooth LE. Equipped with 512 KB SRAM, 384 KB ROM, 2 MB PSRAM and 4 MB Flash memory, as well as a rich set of peripheral interfaces, the board is ideal for advanced technology projects and supports popular development environments such as ESP-IDF, MicroPython and Arduino IDE. Waveshare ESP32-S3-Tiny