Development board with 3.49" touch screen and ESP32-S3R8 with Case A enclosure – Waveshare 32374

DFRobot FireBeetle series is the low-power consumption micro-controller intentionally designed for Internet of Things (IoT). The series micro-controllers aims at IoT node of low-power consumption, attending to build the IoT hardware platform quickly and conveniently. DFR0482

A board with an ESP32 module equipped with a 1.28-inch round display. It offers Wi-Fi and Bluetooth 5.0 communication and has a built-in 6-axis QMI8658 IMU sensor and supports charging lithium batteries. Perfect for developing IoT, mobile devices and wearable electronics projects. Waveshare ESP32-S3-LCD-1.28

Development board based on a microcontroller with a RISC-V core. It offers support for WiFi 6, Bluetooth 5 and Zigbee 3.0 and Thread (IEEE 802.15.4) protocols. Uses the ESP32-C6-WROOM-1 module and two USB Type C connectors. ESP32-C6-DEVKITC-1-N8

ESP32-P4-WIFI6-KIT-B is a comprehensive kit with a touch display and camera, enabling the creation of advanced user interfaces, control systems and IoT applications with multimedia and voice data processing. It provides Wi-Fi 6 and BLE connectivity and advanced security mechanisms.

Board with the WiFi Espressif ESP32-C3 module. It offers 4 MB of Flash memory and 400 KB of SRAM and an RGB diode. It is equipped with a matrix of WS2812B programmable diodes

Compact development kit from the M5StickC series equipped with ESP32 Pico and display. Includes accessories for building a watch. M5Stack K016-H

A board with an ESP32 module equipped with a 4.3-inch touch screen. It offers Wi-Fi and Bluetooth 5.0 communication as well as wired communication via RS485, CAN and I2C interfaces. Perfect for developing HMI projects using LVGL libraries. Waveshare ESP32-S3-Touch-LCD-4.3

ESP32-S3-Touch-AMOLED-1.8-EN is a high-performance, compact module with an AMOLED display and capacitive touch, designed for creating modern user interfaces in wearable devices, portable data acquisition systems, IoT controllers, and solutions with gesture and voice interaction. Thanks to advanced power management and rich peripheral features, it is well-suited for projects requiring independent power supply and high integration.

The Espressif ESP32-S3-WROOM-1 WiFi and Bluetooth LE module board offers 8 MB Flash memory and 8 MB PSRAM. The pinouts are compatible with the ESP32-S3-DevKitC-1 modules.Waveshare ESP32-S3-DEV-KIT-N8R8-M

Development board based on the ESP32-WROOM-32E-N16R2 module, equipped with 16MB Flash and 2MB PSRAM, ideal for projects with a graphical user interface. It supports WiFi, Bluetooth, numerous peripheral interfaces (UART, I2C, SPI, I2S, DAC) and two power supply modes - USB-C and 3.7V battery - with an automatic switching function. Thanks to its compact dimensions, built-in PCB antenna and support for Arduino IDE, ESP-IDF and MicroPython, it is perfect for IoT applications, automation and smart sensors. DFRobot DFR1139

M5Stack series development board equipped with ESP32-S3 WiFi module. It will work well in projects related to IoT, as a STEM educational module or in Smart Home devices. M5Stack S007

KAmod ESP32 ETH+POE is a board equipped with the ESP32-WROOM module, enabling communication via Wi-Fi 2.4 GHz and Ethernet with a typical RJ45 connector, integrated with a USB-UART converter and a PoE power supply system compliant with IEEE 802.3af/at. The design of the board with dimensions of 85x56 mm resembles the Raspberry Pi family, and on the 40-pin connector there are all important I/O ports and supply voltages of 5 V and 3.3 V for powering additional components

Pmod ESP32 is a module with the ESP-WROOM-32 system, allowing for WiFi communication, Bluetooth BLE 4.0 and Bluetooth. For communication, the SPI or UART interface is used (selected by means of the slide switch), which were output on the 12-pin Pmod connector. Digilent 410-377

M5Stack series development kit equipped with ESP32 Pico. Equipped with a 5x5 RGB LED matrix, it will work in IoT-related projects or in "wearable" devices. M5Stack C008-B

ESP32-H2-Zero-M is a ready-to-use board with pre-soldered connectors, equipped with the ESP32-H2FH4S microcontroller and support for BLE, Zigbee and Thread. Designed for rapid prototyping in wireless communication systems, automation and IoT devices.

The KAmod ESP32-C3 board, equipped with a RISC-V microcontroller and a set of MEMS and SHTC3 sensors, enables the creation of IoT, measurement, and control applications. Thanks to power from USB-C or a battery and support for Arduino and Rust, it works perfectly in mobile projects and embedded systems.