

zł7,214.70 tax excl.
Terasic Spider is a six-legged robot rolling with 18 servos controlled by the Altera DE0-Nano-SoC board connecting the FPGA chip and the ARM Cortex-A9 processor. The set contains a complex robot and numerous accessories. P0425
Terasic Spider is a six-legged robot with six limbs moved by 3 servos each (18 servos in total). The servos are controlled by PWM signals generated from the Altera DE0-Nano-SoC board embedded inside the Terasic Spider robot. The robot can be remotely controlled by an Android device with a Bluetooth module. The application allows you to move the robot in four directions, tilt based on the tilt sensor and perform predefined movements.
Software source code for the FPGA chip, ARM processor and Android applications has been fully made available to users, thanks to which the robot can be developed and modified. The servo controller board has an additional 2x20 pin connector, so that we can connect additional sensors to the robot, such as distances or cameras.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
No product available!
With a celebrated reputation as an affordable, simple and fun-to-play DIY robot kit, the Insectbot breed has now evoled to its second generation: the Insectbot Hexa. KIT0090
The Video and Embedded Evaluation Kit - Multi-touch, Second Edition, on Cyclone® V SoC Development Board (VEEK-MT2-C5SoC)
No product available!
No product available!
The Terasic VEEK-MT2 set provides a complete hardware-software platform for designing embedded and multimedia systems using FPGA chips. It enables the creation and testing of interactive, control, and measurement applications thanks to an extensive base of interfaces, memory, and sensors.
No product available!
Stratix V GX FPGA Video Development System
No product available!
No product available!
The adapter is designed to connect boards with a PCIe connector to a computer. Can support PCIe Gen3 x4 interface. Terasic P0492
No product available!
Development kit with Apollo S10 module and base board. Equipped with an Intel Stratix 10 SoC processor with 2800K logic elements, has a DDR4 SDRAM memory (up to 64 GB), built-in USB-Blaster II, Ethernet, microSD, miniUSB and QSFP connectors and USB type C. TerasIC Apollo Developer Kit (P0671)
No product available!
No product available!
The robust hardware design platform built around the Altera System-on-Chip (SoC) FPGA, which combines the latest dual-core Cortex-A9 embedded cores with industry-leading programmable logic for ultimate design flexibility. Users can now leverage the power of tremendous re-configurability paired with a high-performance, low-power processor system.
Terasic DE10-Lite is a cost-effective Altera MAX 10 based FPGA board. Kit contains lots of reference designs and software utilities for users to easily develop their applications based on these design resources
Evaluation board with the Intel Agilex SoC system with 1400 thousand. logical elements. The module has two DDR4 SO-DIMM memory slots (up to 32 GB), QSFP28 connector, PCIe Gen 4x16, built-in USB-Blaster II and FMC/FMC+ connectors for expansion. TerasIC Apollo Agilex SOM (P0714)
No product available!
VEEK-MT2S is a development board based on the Cyclone V SX SoC Cyclone V SX SoC-5CSXFC6D6F31C6N chip. Included in addition to the board with programmable FPGA, there are also a 7-inch TFT touchscreen with a resolution of 800 x 480 pixels, 8 megapixel camera (3264 x 2448 pixels), light sensor IMU 9DOF sensor (accelerometer, gyroscope, magnetometer) . Terasic K0161
No product available!
MAX 10 10M50DAF484C6G with 50K LEs, DDR3 with ECC, QSPI Flash, MicroSD Card, Ethernet, Audio codec, HDMI RX, Acceleromter, ADC, DAC, 8-Mega pixel color camera and 7" 5-point touch screen. P0800
No product available!
FPGA starter kit equipped with Cyclone V GT with 301K LE and minicomputer with Intel Celeron Dual Core (64 GB eMMC, 4 GB RAM). The FPGA module has 1 GB DDR3 memory, 64 MB SDRAM memory, UART-USB interface and extensions such as GPIO and Arduino. Terasic P0650
No product available!
No product available!
TerasIC SODIMM memory module with 18MB capacity and 550MHz operating frequency. The module is designed to work with Intel Stratix 10 FPGAs in evaluation kits such as TerasIC DE10-Pro-GX-280-4G and TerasIC DE10-Pro-GX-280-8G. TerasIC S0534
No product available!
Terasic Spider is a six-legged robot rolling with 18 servos controlled by the Altera DE0-Nano-SoC board connecting the FPGA chip and the ARM Cortex-A9 processor. The set contains a complex robot and numerous accessories. P0425