![Gravity: I/O Expansion Shield - expansion module for the Pyboard kit](https://kamami.pl/87995-large_default/gravity-io-expansion-shield-expansion-module-for-the-pyboard-kit-dfr0577.jpg)
![Gravity: I/O Expansion Shield - expansion module for the Pyboard kit](https://kamami.pl/87995-large_default/gravity-io-expansion-shield-expansion-module-for-the-pyboard-kit-dfr0577.jpg)
zł14.91 tax excl.
The expansion module for the Pyboard 1.1 set. The board has connectors compatible with the Gravity standard. Equipped with digital and analog pins, UART and I2C port. DFRobot DFR0577
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
The expansion module for the Pyboard 1.1 set. The board has connectors compatible with the Gravity standard, so that the user can connect additional sensors and peripheral modules. The module is equipped with a screw connector for power supply and a 3.3 V / VIN power switch, enabling the connection of servos or motors. In the case of using components that require higher current consumption (motor or servo), they should be powered from ports X1 - X4, connecting the external power supply and switching the power supply to VIN. The power supply of X1 - X4 ports can be selected as 3.3V or VIN by a switch. The other ports are supplied with the voltage of 3.3 V. It has digital, analog, UART and I2C ports. In addition, the board has a built-in 3.3 V LDO stabilizer that provides power to the Gravity modules. The pyboard board works with a voltage of 3.3 V, therefore the analog inputs do not support 5 V. All signal pins have a voltage of 3.3 V. The user manual and sample program codes are available on the Wiki website.
Module with a miniature DC motor. No additional controller is required to start the engine. The module is controlled by the PWM signal. DFRobot DFR0411
Module with MLX90614-DCC sensor for non-contact temperature measurement in the range from -70℃ to 380℃. I2C communication. DFRobot SEN0206
BME280 integrates onboard temperature sensor, humidity sensor and barometer. It provides both SPI and I2C interfaces; and can be widely used in environmental monitoring, story height measurement and Internet of Things (IoT) control and so on. SEN0236
DFRobot Gravity analog light intensity module for Arduino and Raspberry Pi. DFRobot DFR0026
Gravity: Analog Sound Sensor is a sound sensor with Gravity analogue output. The module can be supplied with 3.3 ... 5V voltage. DFRobot DFR0034
Current-to-voltage converter module designed for devices with a current signal output. It allows linear conversion of current signals from 0 to 25 mA into voltage signals from 0 to 3 V. DFRrobot SEN0262
An expansion board designed for FireBeetle M0 and ESP32-E kits. The board has 12 GPIO pins, 5 ADC, UART, I2C and SPI interfaces. The pins are color coded according to the Gravity standard. DFRobot DFR0762
A sensor that detects the concentration of hydrogen sulphide. Equipped with a factory calibrated probe. It communicates via the I2C interface, UART or analog output. DFRobot SEN0467
No product available!
NFC module with built-in antenna on the board. The module has a Gravity connector. Memory communication can be done through one of the serial interfaces: UART or I2C. DFRobot DFR0231-H
Module with a 3-axis H3LIS200DL accelerometer. The system has a user selectable wide measurement scale of ±100g/±200g. There is a Gravity connector on the board. DFRobot SEN0412
Module with an analog MQ7 carbon monoxide sensor. It is powered with the voltage of 5 V and has an analog output. DFRobot SEN0132
DC Micro motor module with metal gear with a gear ratio of 30:1. The motor is connected to the board containing the driver. DFRobot DFR0399
Gravity: I2C ADS1115 The 16-Bit ADC Module is an analogue-to-digital converter module for Arduino and Raspberry Pi. This module uses 16-bit ADC ADS1115 and is powered by 3.3 ... 5V. DFRobot DFR0553
Module with red LED, digitally controlled. Perfect for people starting to play with Arduino. Equipped with a Gravity interface. DFRobot DFR0031-R
A sensor that detects the concentration of carbon monoxide. Equipped with a factory calibrated probe. It communicates via the I2C interface, UART or analog output. DFRobot SEN0466
No product available!
A set of 37 sensors with Gravity connectors for Arduino. It includes a suite of the most popular DFRobot sensors, such as light, gas, sound, touch sensors, distance sensor and accelerometer. DFRobot KIT0150
No product available!
A set of 10 cables, 50 cm long, compliant with the Gravity standard. DFRobot FIT0773
Module with an analog MQ8 hydrogen sensor. It is powered with the voltage of 5 V and has an analog output. DFRobot SEN0133
Module with a digital temperature and humidity sensor based on the SHT31-F system. Communication via the I2C interface. Equipped with a Gravity DFRobot SEN0334 connector
No product available!
Gravity: Analog TDS Sensor / Meter is an analog water purity measurement module. It is powered by 3.3 ... 5.5V voltage and has an analogue output interface. Module compatible with Arduino. DFRobot SEN0244
Ring light with 24 RGB diodes WS2812B type controlled by serial signal. The module can be powered with the voltage from 3.3 V to 5 V, only one signal line is required to control it. DFRobot DFR0888-24
The expansion module for the Pyboard 1.1 set. The board has connectors compatible with the Gravity standard. Equipped with digital and analog pins, UART and I2C port. DFRobot DFR0577