Grove High Precision Barometric Pressure Sensor - DPS310 pressure module
ID: 583079
5906623415236
zł43.39
Tax included
zł35.28 tax excl.
Module with a pressure sensor DPS310 with high measurement accuracy. The board is equipped with a Grove connector and communicates via the I2C or SPI interface. Seeed Studio 101020812
Description
Module with a pressure sensor DPS310, which enables pressure measurement in the range from 300 hPa to 1200 hPa with very high accuracy up to 0.002 hPa and temperature in the range from -40 to 85°C. Thanks to such good measurement parameters, the module will find application not only in precise weather stations, but also in flying objects as a sensor for measuring flight altitude with an accuracy of centimeters. The board is equipped with a Grove connector, so it can be used with the Base Shield V2 and Arduino extension. The module communicates via the I2C or SPI interface and is supplied with the voltage of 3.3 V or 5 V. Full documentation of the module with examples of use is available on the product page.
Features
- Pressure measurement range: 300 to 1200 hPa
- Pressure measurement precision: ± 0.002 hPa (± 0.02 m)
- Pressure measurement accuracy (absolute): ± 1 hPa (± 8 m)
- Pressure measurement accuracy (relative): ± 0.06 hPa (± 0.5 m)
- Pressure measurement resolution: 0.06 Pa
- Temperature measurement range: -40 to 85°C
- Temperature measurement accuracy: ± 0.5°C
- I2C or SPI interface
- I2C address 0x77 (default), 0x76
- Supply voltage: 3.3 V or 5 V
Kit contains
- Grove High Precision Barometric Pressure Sensor
- Grove cable
583079
Data sheet
- Interface
- SPI/I2C
- Type of sensor
- inny
- Power supply voltage
- 3,3 - 5 V
- Sensor type
- Ciśnienia atmosferycznego
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.42
Delivery date unknown
No product available!
A set with ATmega2560 microcontroller (256 kB Flash, 8 kB RAM, 4 kB EEPROM) clocked at 16 MHz. The user has, among others: 54 I / O lines, 14 PWM channels, 16 analog inputs. Arduino A000067
zł189.00
24h
Available quantity: 26
Available
Base Shield V2 is an extension for tiles with an Arduino shield connector, it has a Grove connector, which can be connected to Grove-compatible modules / sensors. Seeedstudio 103030000
zł24.40
24h
Available quantity: 19
Available
Grove module with temperature, humidity and pressure sensor. The board is equipped with a Grove connector and communicates via I2C or SPI. Seeed Studio 101020193
zł92.99
24h
Available quantity: 3
Available
Module with a BME680 sensor that allows you to measure temperature, humidity, pressure and gas detection. The board is equipped with a Grove connector and communicates via I2C and SPI. Seeed Studio 101020513
zł110.07
Delivery date unknown
No product available!
The expansion module is designed for Arduino Mega and Google ADK boards. It is equipped with connectors to which you can attach modules compatible with the Grove standard. Seeed Studio 103020027
zł27.36
24h
Available quantity: 4
Available
Other products in the same category (16)
Module with MLX90614 temperature sensor with a measurement accuracy of 0.2°C and a viewing angle of 5°. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020894
zł360.69
4 weeks
No product available!
Module with PIR S16-L221D motion sensor. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 101020353
zł29.42
4 weeks
No product available!
A small module - an infrared emitter (LED IR). The diode emits infrared light with a wavelength of 940 nm. With the help of the module, it is possible to transmit commands or signals that can be received by an infrared receiver. The transmission range is up to 10 meters. Seeed studio 101020026
zł18.45
24h
Available quantity: 3
Available
Module with a slide potentiometer. Depending on the position of the slider, the resistance value (maximum resistance 10kΩ) changes, which translates into the voltage value at the analog output of the module. The module has a connector in accordance with the Grove standard. Seeed studio 101020036
zł32.04
24h
Available quantity: 1
Available
Module with a button and yellow LED backlight. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 111020045
zł12.09
24h
Available quantity: 1
Available
The Hall sensor module allows magnetic field detection, can be used to measure angle of rotation, displacement, mechanical vibrations, etc. The module has a connector in accordance with the Grove standard. Seeed studio 101020046
zł13.76
4 weeks
No product available!
Grove adapter for 3.5mm screw connector. Seeed Studio 103020007
zł8.54
24h
Available quantity: 1
Available
The module is compatible with the Grove Base Shield and designed to implement a wireless serial connection. It uses BluetoothV2.0+EDR and UART communication. Seeed Studio 113020008
zł110.24
24h
Available quantity: 3
Available
Module with LED driver. It can control LED strips with a length of 1 to 2 meters at a voltage of 9 V or from 1 to 5 meters at a voltage of 12 V. Seeed Studio 105020002
zł54.85
24h
Available quantity: 3
Available
A module with a 24-bit ADC converter HX711, which enables reading data from strain gauges and scales. The board is equipped with a Grove connector and communicates via a serial interface. Seeed Studio 101020712
zł19.10
24h
Available quantity: 2
Available
Air530Z GPS module with external antenna. The board is equipped with a Grove connector and communicates via the UART interface. Seeed Studio 109020022
zł47.90
24h
Available quantity: 1
Available
Expansion module with Qwiic connectors. The board is equipped with a Grove connector and allows communication via the I2C interface. Seeed Studio 103020292
zł19.38
4 weeks
No product available!
Module with 10 RGB LEDs WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020131
zł25.26
24h
Available quantity: 2
Available
Module with OLED 0.96" display with a resolution of 128x64 px. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 104030008
zł94.59
24h
Available quantity: 3
Available
Module with SSR M281 relay with a load of up to 1 A. The board is equipped with a Grove connector and is controlled by a digital input. Seeed Studio 101020603
zł31.92
24h
Available quantity: 2
Available
A set with a prototype breadboard equipped with a Grove connector. Seeed Studio 103020232
zł20.14
4 weeks
No product available!
Module with a pressure sensor DPS310 with high measurement accuracy. The board is equipped with a Grove connector and communicates via the I2C or SPI interface. Seeed Studio 101020812