Grove Turbidity Sensor - liquid turbidity sensor
ID: 583100
5906623415335
zł133.75
Tax included
zł108.74 tax excl.
Module with liquid turbidity sensor. The board is equipped with a Grove connector and communicates via a digital or analog interface. Seeed Studio 101020752
Description
Module with a liquid turbidity sensor that allows you to measure the amount of suspended particles in water. The process consists in checking the permeability of the tested liquid and the light scattering rate, which depend on the total amount of solid particles (TSS) in the liquid. An increase in TTS determines the increase in the level of turbidity. The sensor can operate in two modes: digital and analog. In digital mode, the particle level threshold is set with a potentiometer. The board is equipped with a Grove connector, so it can be used with the Base Shield V2 and Arduino extension. The module communicates via a digital or analog interface and is supplied with a voltage of 3.3 V or 5 V. It can be used to measure the quality of water in rivers, streams, aquariums, as instrumentation for monitoring pools, during sediment transport studies and even laboratory measurements. Full documentation with examples of use is available on the product page.
Features
- Measuring range: 0 to 1000 NTU
- Analog output
- Digital output (low/high state, threshold set with a potentiometer)
- Signal diode
- Output mode switch
- Supply voltage: 3.3 V or 5 V
- Dimensions: 40 x 20 mm
Kit contains
- Grove Turbidity Sensor module
- Probe
- Connection cable
- Grove cable
583100
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.42
Delivery date unknown
No product available!
A set with ATmega2560 microcontroller (256 kB Flash, 8 kB RAM, 4 kB EEPROM) clocked at 16 MHz. The user has, among others: 54 I / O lines, 14 PWM channels, 16 analog inputs. Arduino A000067
zł189.00
24h
Available quantity: 26
Available
Base Shield V2 is an extension for tiles with an Arduino shield connector, it has a Grove connector, which can be connected to Grove-compatible modules / sensors. Seeedstudio 103030000
zł24.40
24h
Available quantity: 19
Available
The expansion module is designed for Arduino Mega and Google ADK boards. It is equipped with connectors to which you can attach modules compatible with the Grove standard. Seeed Studio 103020027
zł27.36
24h
Available quantity: 4
Available
Other products in the same category (16)
Module with LCD display 16x2 characters with black text and yellow backlight. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 104020113
zł29.91
24h
Available quantity: 2
Available
Module with OLED display 0.96" with a resolution of 128x64 px. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 104020208
zł34.96
4 weeks
No product available!
Waterproof strip with RGB LED diodes, 1 m long (60 LEDs per meter). The LEDs are mounted on a flexible white PCB, the tape has a Grove connector. Seeed Studio 104020109
zł51.83
24h
Available quantity: 2
Available
Module with the LIS3DHTR 3-axis accelerometer. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 114020121
zł24.06
24h
Available quantity: 2
Available
Red mounting for Grove modules, which ensure convenient installation and replacement of modules in the project. Compatible with LEGO. Set of 4. Seeed Studio 110070020
zł10.39
24h
Available quantity: 1
Available
Module with 10 RGB LEDs WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020131
zł25.26
24h
Available quantity: 2
Available
Grove module with temperature, humidity and pressure sensor. The board is equipped with a Grove connector and communicates via I2C or SPI. Seeed Studio 101020193
zł92.99
24h
Available quantity: 3
Available
4-core cable with a length of 15 cm, terminated on one end with a Grove plug, and on the other with a male goldpin connector. Seeed Studio 110990210
zł8.84
24h
Available quantity: 1
Available
Grove module with FSR402 pressure sensor. The board is equipped with a Grove connector with an analog output. Seeed Studio 101020553
zł75.90
4 weeks
No product available!
Set with mini propeller, DC motor and module with motor controller. Allows you to build a mini fan with speed control. Seeed Studio 108020021
zł46.91
24h
Available quantity: 1
Available
A module with an AHT20 industrial grade temperature and humidity sensor. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101990644
zł41.98
24h
Available quantity: 2
Available
Recorder v3.0 is a module that allows you to record and play sounds. The module was based on the ISD9160FI system, it also has a FLASH memory with a capacity of 2 MB, which allows for recording up to 83 seconds long. The set contains a small loudspeaker on which recorded sounds can be played. Seeed studio 107020029
zł60.82
24h
Available quantity: 1
Available
Module with LSM6DS3 sensor that combines a 3-axis accelerometer and a 3-axis gyroscope. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 105020012
zł56.22
24h
Available quantity: 1
Available
Module with a purple LED diode. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020002
zł44.32
24h
Available quantity: 3
Available
Module with a button and blue LED backlight. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 111020046
zł12.47
24h
Available quantity: 1
Available
Module with 2-channel driver for DC motors L298P. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 105020093
zł81.54
24h
Available quantity: 2
Available
Module with liquid turbidity sensor. The board is equipped with a Grove connector and communicates via a digital or analog interface. Seeed Studio 101020752