Grove Triple Color E-Ink Display - module with 3-color e-Paper 1.54" 152x152
ID: 583162
5906623416394
zł130.22
Tax included
zł105.87 tax excl.
Module with a 3-color (red, black, white) e-Paper display with a diagonal of 1.54" and a resolution of 152x152 px. The board is equipped with a Grove connector and communicates via the UART interface. Seeed Studio 104020129
Description
Module with a 3-color (red, black, white) e-Paper display with a diagonal of 1.54 "and a resolution of 152x152 px. It has the ability to display content with a two-level gray scale. Built-in STM32 microcontroller performs communication via UART interface. E-Paper displays are characterized by high contrast of the displayed image and consume power only when the displayed content is changed. The board is equipped with a Grove connector, so it can be used with the Base Shield V2 and Arduino extension. Full documentation of the module with examples of use is available on the product page.
Features
- Diagonal: 1.54"
- Resolution: 152x152 px
- Display color: red, black, white
- Gray levels: 2
- Interface: UART (baudrate 230400)
- Pixel size: 0.181 × 0.181
- Viewing angle:> 170 °
- No backlight, display the last content after power off
- Low energy consumption
- Supply voltage: 3.3 V or 5 V
- Working temperature: 0 to 40 ℃
- Working humidity: 40 to 70% RH
- Dimensions: 43 x 43 mm
583162
Data sheet
- Screen type
- E-Ink/Epaper
- Diagonal (inch)
- 1,54
- Resolution
- 152 x 152 px
- Interface
- UART
- Touch
- No
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.42
24h
Available quantity: 83
Available
A set with ATmega2560 microcontroller (256 kB Flash, 8 kB RAM, 4 kB EEPROM) clocked at 16 MHz. The user has, among others: 54 I / O lines, 14 PWM channels, 16 analog inputs. Arduino A000067
Regular pricezł207.92zł188.92
24h
Available quantity: 44
Available
Base Shield V2 is an extension for tiles with an Arduino shield connector, it has a Grove connector, which can be connected to Grove-compatible modules / sensors. Seeedstudio 103030000
zł24.40
24h
Available quantity: 22
Available
Module with a 3-color (red, black, white) e-Paper display with a diagonal of 1.54" and a resolution of 152x152 px. The board is equipped with a Grove connector and communicates via the UART interface. Seeed Studio 104020129
zł130.22
24h
Available quantity: 1
Available
The expansion module is designed for Arduino Mega and Google ADK boards. It is equipped with connectors to which you can attach modules compatible with the Grove standard. Seeed Studio 103020027
zł27.36
24h
Available quantity: 4
Available
Other products in the same category (16)
Module with red LED diode and potentiometer. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104030005
zł12.26
24h
Available quantity: 1
Available
Waterproof strip with RGB LED diodes, 1 m long (30 LEDs per meter). The LEDs are mounted on a flexible white PCB, the tape has a Grove connector. Seeed Studio 104020108
zł32.75
24h
Available quantity: 3
Available
LM386 audio amplifier module in a set with a loudspeaker. The board is equipped with a Grove connector and is controlled by a PWM signal. Seeed Studio 101020853
zł57.54
24h
Available quantity: 3
Available
Module with real time clock (RTC) PCF85063TP and CR1225 battery socket. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 102020083
zł44.24
24h
Available quantity: 4
Available
Module with RGB LED WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020169
zł24.54
24h
Available quantity: 3
Available
Power supply module with a 650 mAh battery for the Wio Terminal set. Seeed Studio 103990564
zł124.55
24h
Available quantity: 1
Available
Module with a flame sensor or other light sources with a wavelength in the range of 760 to 1100 nm. It was based on the YG1006 sensor (photovolver NPN). The sensor has a connector compatible with the Grove standard. Seeed studio 101020049
zł38.14
24h
Available quantity: 2
Available
Waterproof strip with RGB LED diodes, 1 m long (60 LEDs per meter). The LEDs are mounted on a flexible white PCB, the tape has a Grove connector. Seeed Studio 104020109
zł51.83
24h
Available quantity: 2
Available
Module for recording sounds, which can store recordings up to 20 seconds. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 107020007
zł37.82
24h
Available quantity: 2
Available
The module with the ADIS16470 chip, which combines a 3-axis accelerometer and a gyroscope. The board is equipped with a Grove connector and communicates via the I2C or SPI interface. Seeed Studio 101020672
zł1,941.11
4 weeks
No product available!
A module with an AHT20 industrial grade temperature and humidity sensor. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101990644
zł41.98
24h
Available quantity: 2
Available
Module with a pressure sensor with high accuracy HP206C. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020068
zł131.47
24h
Available quantity: 1
Available
Module with LCD display 16x2 characters with RGB backlight. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 104030001
zł99.68
24h
Available quantity: 2
Available
Module with the LIS3DHTR 3-axis accelerometer. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 114020121
zł24.06
24h
Available quantity: 2
Available
Module with humidity and air temperature sensor based on the AM2302 system. It allows temperature measurement in the range from -40 to 80 ° C and the humidity measurement takes place in the range of 5 to 99% RH. The module has a connector in accordance with the Grove standard. Seeed Studio 101020019
zł62.32
24h
Available quantity: 5
Available
Module with a 3-axis MMA7660FC accelerometer with a measuring range up to ± 1.5g. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020039
zł64.13
24h
Available quantity: 3
Available
Module with a 3-color (red, black, white) e-Paper display with a diagonal of 1.54" and a resolution of 152x152 px. The board is equipped with a Grove connector and communicates via the UART interface. Seeed Studio 104020129