RGB 4x4 LED matrix with WS2812B
ID: 584132
zł5.71
Tax included
zł4.64 tax excl.
Matrix with 16 WS2812B RGB diodes controlled by a serial signal. The module can be powered with 5V, only one signal line is required for control
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
Matrix with 16 RGB WS2812B LEDs. Their special feature is the driver included in the structure, which interprets the signals from the LED input and shifts them to its output at the right moment or controls the LED structure. Each of the diodes is connected in series with the neighboring one (signal output to the input of the adjacent diode), thanks to which the whole creates a shift register. The matrix is controlled by means of a single wire, on which appropriately formed pulses are applied, addressing the next WS2812B diode. After addressing the entire matrix of diodes, there is an impulse that allows the content of each cell to be displayed, thus creating a 4x4 image.
The matrix has two connectors; input and output. The dies can be combined in rows (taking into account the technical limits of the control system and dies). It is also possible to connect the matrix with a tape or other module with WS2812B diodes.
Features
- 16 RGB LEDs (WS2812B)
- Supply voltage: 5V
- Current consumption: max. 60 mA per diode
- Each of the primary colors of the diode (R, G, B) can adopt up to 256 levels of brightness
- The possibility of obtaining a color in one of over 16.7 million color shades
- Laminate color: black
- It has solder pads that allow you to solder the wires
584132
You might also like
No product available!
Light ring with 40 RGB LEDs, type WS2812, controlled by a serial signal. The module can be powered by 5V, only one signal line is required to control it.
zł55.42
24h
Available quantity: 1
Available
Light ring with 32 RGB LEDs, type WS2812, controlled by a serial signal. The module can be powered by 5V, only one signal line is required to control it.
zł17.63
Delivery date unknown
No product available!
Matrix with 4 WS2812B RGB diodes controlled by a serial signal. The module can be powered with 5V, only one signal line is required for control
zł3.21
24h
Available quantity: 48
Available
Other products in the same category (16)
This is the tiniest little LED grid, with 64 full RGB color pixels in a square. For use with Arduino and Raspberry Pi. Adafruit 3444
zł167.32
4 weeks
No product available!
9x16 Charlieplexed LEDs designed to match with the Adafruit 16x9 Charlieplexed PWM LED Matrix Driver - IS31FL3731. Color: RED. Adafruit 2947
zł42.35
4 weeks
No product available!
Light ring with 24 single-color LEDs controlled by the I2C interface. The board can be powered with 5 V and consumes up to 5.5 mA per diode. Seeed Studio 104030013
zł76.49
24h
Available quantity: 4
Available
COB LED ring, made of aluminum PCB, emits cold white light (6000-6500k) at 12 V DC with a maximum current consumption of 1100 mA, offering a wide beam angle of 120 °
zł31.28
24h
Available quantity: 10
Available
Gravity module with a colored RGB WS2812 LED. Thanks to the controller built into the diode, you can connect the modules in series and control all with one microcontroller port. DFRobot DFR0605
zł8.88
24h
Available quantity: 8
Available
LED backlight, WHITE WARM, light intensity 7.5 lm 12V 20mA, waterproof housing, easy self-adhesive assembly
zł3.23
24h
Available quantity: 8
Available
RGB LED matrix display with a resolution of 32 x 16 (512 LED). DFRobot DFR0471
zł101.24
24h
Available quantity: 4
Available
COB LED ring, made of aluminum PCB, emits warm white light (2800-3000k) at 12 V DC with a maximum current consumption of 800 mA, offering a wide beam angle of 120 °
zł23.00
24h
Available quantity: 10
Available
Module with LED strip designed for the MyoWare 2.0 muscle tension sensor. Equipped with a LiPo battery, it allows you to build portable devices. SparkFun DEV-18387
zł162.13
24h
Available quantity: 2
Available
Module with RGB LED, it is possible to control individual colors using digital signals as well as PWM signals. The module has a connector in accordance with the Grove standard. Seeed studio 101020472
zł22.24
24h
Available quantity: 2
Available
LED diode 10LED two-colored - bargraph, ultra-10mcd (4mA) - max: 40mcd (20mA), ultragreen 10mcd 4mA) - max: 40mcd (20mA)
zł7.69
24h
Available quantity: 13
Available
Module of four integrated 8x8 LED (color red) matrixes based on the MAX7219 controller. Module controlled by the SPI interface.
zł34.02
24h
Available quantity: 20
Available
Matrix with 4 WS2812B RGB diodes controlled by a serial signal. The module can be powered with 5V, only one signal line is required for control
zł3.21
24h
Available quantity: 48
Available
LED backlight. Yellow. light 2.7 lm 12V 20mA 595nm, waterproof housing, easy self-adhesive assembly
zł3.20
24h
Available quantity: 10
Available
Module with 10 addressable RGB LEDs APA102C. Each of the LEDs is independently controlled via the I2C interface, and the line address is modified, so that the modules can be connected with each other. SparkFun COM-18354
zł56.84
24h
Available quantity: 2
Available
No product available!
Matrix with 16 WS2812B RGB diodes controlled by a serial signal. The module can be powered with 5V, only one signal line is required for control